The wmi_start_scan_cmd has an extra filed in our main
firmware track, reflact that to not have a mismatch in
case of 10.x track.
Signed-off-by: Bartosz Markowski <bartosz.markowski@xxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/wmi.c | 19 ++++++--
drivers/net/wireless/ath/ath10k/wmi.h | 82 +++++++++++++++++++++++++++++++++
2 files changed, 97 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 3460cf4..e7dc911 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2341,11 +2341,15 @@ int ath10k_wmi_cmd_init(struct ath10k *ar)
return ret;
}
-static int ath10k_wmi_start_scan_calc_len(const struct wmi_start_scan_arg *arg)
+static int ath10k_wmi_start_scan_calc_len(struct ath10k *ar,
+ const struct wmi_start_scan_arg *arg)
{
int len;
- len = sizeof(struct wmi_start_scan_cmd);
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ len = sizeof(struct wmi_start_scan_cmd_10x);
+ else
+ len = sizeof(struct wmi_start_scan_cmd);
if (arg->ie_len) {
if (!arg->ie)
@@ -2405,7 +2409,7 @@ int ath10k_wmi_start_scan(struct ath10k *ar,
int len = 0;
int i;
- len = ath10k_wmi_start_scan_calc_len(arg);
+ len = ath10k_wmi_start_scan_calc_len(ar, arg);
if (len < 0)
return len; /* len contains error code here */
@@ -2437,7 +2441,14 @@ int ath10k_wmi_start_scan(struct ath10k *ar,
cmd->scan_ctrl_flags = __cpu_to_le32(arg->scan_ctrl_flags);
/* TLV list starts after fields included in the struct */
- off = sizeof(*cmd);
+ /* There's just one filed that differes the two start_scan
+ * structures - burst_duration, which we are not using btw,
+ no point to make the split here, just shift the buffer to fit with
+ given FW */
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ off = sizeof(struct wmi_start_scan_cmd_10x);
+ else
+ off = sizeof(struct wmi_start_scan_cmd);
if (arg->n_channels) {
channels = (void *)skb->data + off;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 80ab2f0..7692c14 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1715,6 +1715,88 @@ struct wmi_start_scan_cmd {
*/
} __packed;
+/* This is the definition from 10.X firmware branch */
+struct wmi_start_scan_cmd_10x {
+ /* Scan ID */
+ __le32 scan_id;
+
+ /* Scan requestor ID */
+ __le32 scan_req_id;
+
+ /* VDEV id(interface) that is requesting scan */
+ __le32 vdev_id;
+
+ /* Scan Priority, input to scan scheduler */
+ __le32 scan_priority;
+
+ /* Scan events subscription */
+ __le32 notify_scan_events;
+
+ /* dwell time in msec on active channels */
+ __le32 dwell_time_active;
+
+ /* dwell time in msec on passive channels */
+ __le32 dwell_time_passive;
+
+ /*
+ * min time in msec on the BSS channel,only valid if atleast one
+ * VDEV is active
+ */
+ __le32 min_rest_time;
+
+ /*
+ * max rest time in msec on the BSS channel,only valid if at least
+ * one VDEV is active
+ */
+ /*
+ * the scanner will rest on the bss channel at least min_rest_time
+ * after min_rest_time the scanner will start checking for tx/rx
+ * activity on all VDEVs. if there is no activity the scanner will
+ * switch to off channel. if there is activity the scanner will let
+ * the radio on the bss channel until max_rest_time expires.at
+ * max_rest_time scanner will switch to off channel irrespective of
+ * activity. activity is determined by the idle_time parameter.
+ */
+ __le32 max_rest_time;
+
+ /*
+ * time before sending next set of probe requests.
+ * The scanner keeps repeating probe requests transmission with
+ * period specified by repeat_probe_time.
+ * The number of probe requests specified depends on the ssid_list
+ * and bssid_list
+ */
+ __le32 repeat_probe_time;
+
+ /* time in msec between 2 consequetive probe requests with in a set. */
+ __le32 probe_spacing_time;
+
+ /*
+ * data inactivity time in msec on bss channel that will be used by
+ * scanner for measuring the inactivity.
+ */
+ __le32 idle_time;
+
+ /* maximum time in msec allowed for scan */
+ __le32 max_scan_time;
+
+ /*
+ * delay in msec before sending first probe request after switching
+ * to a channel
+ */
+ __le32 probe_delay;
+
+ /* Scan control flags */
+ __le32 scan_ctrl_flags;
+
+ /*
+ * TLV (tag length value ) paramerters follow the scan_cmd structure.
+ * TLV can contain channel list, bssid list, ssid list and
+ * ie. the TLV tags are defined above;
+ */
+} __packed;
+
+
struct wmi_ssid_arg {
int len;
const u8 *ssid;
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
