Bartosz Markowski <bartosz.markowski@xxxxxxxxx> writes: > Due to API differences in initialization structures for > main and 10.x firmwares we need to split the wmi_init_cmd > and wmi_resource_config structures. > > This will be usefull also when setting the correct TARGET values, > like: number of peers, vdevs, pdevs etc. > > Signed-off-by: Bartosz Markowski <bartosz.markowski@xxxxxxxxx> > --- > drivers/net/wireless/ath/ath10k/core.c | 6 +- > drivers/net/wireless/ath/ath10k/wmi.c | 91 +++++++++++++++ > drivers/net/wireless/ath/ath10k/wmi.h | 196 ++++++++++++++++++++++++++++++++ > 3 files changed, 292 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c > index 31860a6..3a56715 100644 > --- a/drivers/net/wireless/ath/ath10k/core.c > +++ b/drivers/net/wireless/ath/ath10k/core.c > @@ -595,7 +595,11 @@ int ath10k_core_start(struct ath10k *ar) > > ath10k_info("firmware %s booted\n", ar->hw->wiphy->fw_version); > > - status = ath10k_wmi_cmd_init(ar); > + if (test_bit(ATH10K_FW_FEATURE_10X, ar->fw_features)) > + status = ath10k_wmi_10x_cmd_init(ar); > + else > + status = ath10k_wmi_cmd_init(ar); It's better to hide the feature check inside ath10k_wmi_cmd_init() and then that function can just call ath10k_wmi_10x_cmd_init() or ath10k_wmi_main_cmd_init() (or whatever naming would be approriate here). So we only expose ath10k_wmi_cmd_init() outside of wmi.c. -- Kalle Valo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html