From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
Fast antenna diversity is required only for single chain
chips and the diversity initialization is done in the
per-family board setup routines. Enabling of diversity
should be done based on the calibrated EEPROM/OTP data,
doing it for all chips is incorrect.
Remove the code that sets the fast_div bit for all cards, since
the documentation for the AR_PHY_CCK_DETECT register says:
reg 642: sig_detect_cck
enable_ant_fast_div : Only used for single chain chips.
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar5008_phy.c | 3 ---
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 3 ---
2 files changed, 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index 9e4e2a6..cb6435e 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -631,9 +631,6 @@ static void ar5008_hw_override_ini(struct ath_hw *ah,
REG_WRITE(ah, AR_PCU_MISC_MODE2, val);
}
- REG_SET_BIT(ah, AR_PHY_CCK_DETECT,
- AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
-
if (AR_SREV_9280_20_OR_LATER(ah))
return;
/*
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index ec37213..0131ba2 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -632,9 +632,6 @@ static void ar9003_hw_override_ini(struct ath_hw *ah)
AR_PCU_MISC_MODE2_CFP_IGNORE;
REG_WRITE(ah, AR_PCU_MISC_MODE2, val);
- REG_SET_BIT(ah, AR_PHY_CCK_DETECT,
- AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
-
if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
REG_WRITE(ah, AR_GLB_SWREG_DISCONT_MODE,
AR_GLB_SWREG_DISCONT_EN_BT_WLAN);
--
1.8.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
