On 09/13/2013 10:11 AM, Albert Lo wrote:
Hello,
Forgive the newbie question, but I'm having a hard time setting the channel. Here is my output:
======================================
root@OpenWrt:~# iw dev wlan0 info
Interface wlan0
ifindex 7
wdev 0x2
addr 04:f0:21:01:1b:91
type AP
wiphy 0
channel 11 (2462 MHz) NO HT
root@OpenWrt:~# iw reg get
country US:
(2402 - 2472 @ 40), (3, 27)
(5170 - 5250 @ 40), (3, 17)
(5250 - 5330 @ 40), (3, 20), DFS
(5490 - 5600 @ 40), (3, 20), DFS
(5650 - 5710 @ 40), (3, 20), DFS
(5735 - 5835 @ 40), (3, 30)
root@OpenWrt:/# iw dev wlan0 set channel 10
root@OpenWrt:/# iw dev wlan0 set channel 19
command failed: Invalid argument (-22)
==================================================
Any ideas why setting channel to 10 is ok, but setting channel to 19 fails?
I do notice that my phy is split into two parts, Band1 and Band2.
There is no channel 19. Band2 starts at channel 36.
Frequencies:
* 5180 MHz [36] (17.0 dBm)
* 5200 MHz [40] (17.0 dBm)
* 5220 MHz [44] (17.0 dBm)
* 5240 MHz [48] (17.0 dBm)
* 5260 MHz [52] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5280 MHz [56] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5300 MHz [60] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5320 MHz [64] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5500 MHz [100] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5520 MHz [104] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5540 MHz [108] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5560 MHz [112] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5580 MHz [116] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5600 MHz [120] (disabled)
* 5620 MHz [124] (disabled)
* 5640 MHz [128] (disabled)
* 5660 MHz [132] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5680 MHz [136] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5700 MHz [140] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5745 MHz [149] (30.0 dBm)
* 5765 MHz [153] (30.0 dBm)
* 5785 MHz [157] (30.0 dBm)
* 5805 MHz [161] (30.0 dBm)
* 5825 MHz [165] (30.0 dBm)
For normal use, you usually don't need to specify the channel anyway, by the way.
Thanks,
Ben
--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc http://www.candelatech.com
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
