Hi, I am trying to get a BCM43241 card running on a 3.11-amd64 kernel. [1] lists the device as supported but gives no instructions on how to install it. I managed to extract the firmware from the git binary patch contained in [2]. I copied the firmware to /lib/firmware/brcm/brcmfmac-sdio.bin and copied the content of /dev/nvram to /lib/firmware/brcm/brcmfmac-sdio.txt. Previously, `dmesg` would list error that indicated missing files. Currently, the output is as follows: [12865.299503] brcmfmac: brcmf_sdio_chip_drivestrengthinit: No SDIO Drive strength init done for chip 4324 rev 5 pmurev 17 [12866.393551] brcmfmac: brcmf_sdbrcm_htclk: HT Avail timeout (1000000): clkctl 0x50 [12867.402386] brcmfmac: brcmf_sdbrcm_htclk: HT Avail timeout (1000000): clkctl 0x50 [12867.409143] brcmfmac: brcmf_proto_cdc_query_dcmd: brcmf_proto_cdc_msg failed w/status -5 [12867.409149] brcmfmac: brcmf_fil_cmd_data: Failed err=-5 [12867.409153] brcmfmac: brcmf_c_preinit_dcmds: Retreiving cur_etheraddr failed, -5 [12867.409157] brcmfmac: brcmf_bus_start: failed: -5 [12867.409167] brcmfmac: brcmf_sdbrcm_probe: dongle is not responding [12868.416890] brcmfmac: brcmf_sdbrcm_htclk: HT Avail timeout (1000000): clkctl 0x50 [12869.426308] brcmfmac: brcmf_sdbrcm_htclk: HT Avail timeout (1000000): clkctl 0x50 I have not been able to find anything to help with debugging this. There was some discussion in response to [2] that I don't understand. Is there something wrong with the firmware itself? I would be very grateful for any help. I can provide all additional information if something is missing from this report. (I can also be reached via IRC, 'Eruquen' on freenode) Thanks in advance, Jan-Oliver [1] http://wireless.kernel.org/en/users/Drivers/brcm80211 [2] http://www.spinics.net/lists/linux-wireless/msg107754.html -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
