From: Igal Chernobelsky <igalc@xxxxxx>
Driver default config is aligned with phy default parameters.
Now that RDL1_3 has 2 antennas defined by default we need to explicitly
define ht.mode to HT_MODE_WIDE to have SISO40 as default.
Signed-off-by: Yair Shapira <yair.shapira@xxxxxx>
Signed-off-by: Igal Chernobelsky <igalc@xxxxxx>
Signed-off-by: Eliad Peller <eliad@xxxxxxxxxx>
---
drivers/net/wireless/ti/wl18xx/main.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index aef0c91..7302308 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -505,7 +505,7 @@ static struct wlcore_conf wl18xx_conf = {
static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
.ht = {
- .mode = HT_MODE_DEFAULT,
+ .mode = HT_MODE_WIDE,
},
.phy = {
.phy_standalone = 0x00,
@@ -516,7 +516,7 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
.auto_detect = 0x00,
.dedicated_fem = FEM_NONE,
.low_band_component = COMPONENT_3_WAY_SWITCH,
- .low_band_component_type = 0x04,
+ .low_band_component_type = 0x05,
.high_band_component = COMPONENT_2_WAY_SWITCH,
.high_band_component_type = 0x09,
.tcxo_ldo_voltage = 0x00,
@@ -556,15 +556,15 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
.per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff },
.psat = 0,
- .low_power_val = 0x08,
- .med_power_val = 0x12,
- .high_power_val = 0x18,
- .low_power_val_2nd = 0x05,
- .med_power_val_2nd = 0x0a,
- .high_power_val_2nd = 0x14,
.external_pa_dc2dc = 0,
.number_of_assembled_ant2_4 = 2,
.number_of_assembled_ant5 = 1,
+ .low_power_val = 0xff,
+ .med_power_val = 0xff,
+ .high_power_val = 0xff,
+ .low_power_val_2nd = 0xff,
+ .med_power_val_2nd = 0xff,
+ .high_power_val_2nd = 0xff,
.tx_rf_margin = 1,
},
};
--
1.8.3.rc1.35.g9b79519
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
