Limit the current implementation to a single channel context used by
a single vif, thereby avoiding multi-vif/channel complexities.
Reuse the main function from AP CSA code, but move a portion out in
order to fit the STA scenario.
Add a new mac80211 HW flag so we don't break devices that don't support
channel switch with channel-contexts. The new behavior will be opt-in.
Signed-off-by: Arik Nemtsov <arik@xxxxxxxxxx>
---
include/net/mac80211.h | 6 ++++++
net/mac80211/cfg.c | 5 +++++
net/mac80211/chan.c | 5 -----
net/mac80211/mlme.c | 57 +++++++++++++++++++++++++++++++++++++-------------
4 files changed, 54 insertions(+), 19 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 06ffae8..c450644 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1492,6 +1492,11 @@ struct ieee80211_tx_control {
*
* @IEEE80211_HW_TIMING_BEACON_ONLY: Use sync timing from beacon frames
* only, to allow getting TBTT of a DTIM beacon.
+ *
+ * @IEEE80211_HW_CHANCTX_STA_CSA: Support 802.11H based channel-switch (CSA)
+ * for a single active channel while using channel contexts. When support
+ * is not enabled the default action is to disconnect when getting the
+ * CSA frame.
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
@@ -1522,6 +1527,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25,
IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26,
IEEE80211_HW_SUPPORTS_HT_CCK_RATES = 1<<27,
+ IEEE80211_HW_CHANCTX_STA_CSA = 1<<28,
};
/**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index b455e72..ac28af7 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2871,6 +2871,11 @@ void ieee80211_csa_finalize_work(struct work_struct *work)
if (WARN_ON(err < 0))
return;
+ if (!local->use_chanctx) {
+ local->_oper_chandef = local->csa_chandef;
+ ieee80211_hw_config(local, 0);
+ }
+
ieee80211_bss_info_change_notify(sdata, changed);
switch (sdata->vif.type) {
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index 3a4764b..03ba6b5 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -453,11 +453,6 @@ int ieee80211_vif_change_channel(struct ieee80211_sub_if_data *sdata,
chanctx_changed |= IEEE80211_CHANCTX_CHANGE_CHANNEL;
drv_change_chanctx(local, ctx, chanctx_changed);
- if (!local->use_chanctx) {
- local->_oper_chandef = *chandef;
- ieee80211_hw_config(local, 0);
- }
-
ieee80211_recalc_chanctx_chantype(local, ctx);
ieee80211_recalc_smps_chanctx(local, ctx);
ieee80211_recalc_radar_chanctx(local, ctx);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 9fce0f4..91cc828 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -876,6 +876,8 @@ static void ieee80211_chswitch_work(struct work_struct *work)
container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ u32 changed = 0;
+ int ret;
if (!ieee80211_sdata_running(sdata))
return;
@@ -884,24 +886,39 @@ static void ieee80211_chswitch_work(struct work_struct *work)
if (!ifmgd->associated)
goto out;
- local->_oper_chandef = local->csa_chandef;
+ ret = ieee80211_vif_change_channel(sdata, &local->csa_chandef,
+ &changed);
+ if (ret) {
+ sdata_info(sdata,
+ "vif channel switch failed, disconnecting\n");
+ ieee80211_queue_work(&sdata->local->hw,
+ &ifmgd->csa_connection_drop_work);
+ goto out;
+ }
- if (!local->ops->channel_switch) {
- /* call "hw_config" only if doing sw channel switch */
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
- } else {
- /* update the device channel directly */
- local->hw.conf.chandef = local->_oper_chandef;
+ if (!local->use_chanctx) {
+ local->_oper_chandef = local->csa_chandef;
+ /* Call "hw_config" only if doing sw channel switch.
+ * Otherwise update the channel directly
+ */
+ if (!local->ops->channel_switch)
+ ieee80211_hw_config(local, 0);
+ else
+ local->hw.conf.chandef = local->_oper_chandef;
}
/* XXX: shouldn't really modify cfg80211-owned data! */
- ifmgd->associated->channel = local->_oper_chandef.chan;
+ ifmgd->associated->channel = local->csa_chandef.chan;
/* XXX: wait for a beacon first? */
ieee80211_wake_queues_by_reason(&local->hw,
IEEE80211_MAX_QUEUE_MAP,
IEEE80211_QUEUE_STOP_REASON_CSA);
+
+ ieee80211_bss_info_change_notify(sdata, changed);
+
out:
+ sdata->vif.csa_active = false;
ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
sdata_unlock(sdata);
}
@@ -983,17 +1000,28 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
}
ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED;
+ sdata->vif.csa_active = true;
+ mutex_lock(&local->chanctx_mtx);
if (local->use_chanctx) {
- sdata_info(sdata,
- "not handling channel switch with channel contexts\n");
- ieee80211_queue_work(&local->hw,
- &ifmgd->csa_connection_drop_work);
- return;
+ u32 num_chanctx = 0;
+ list_for_each_entry(chanctx, &local->chanctx_list, list)
+ num_chanctx++;
+
+ if (num_chanctx > 1 ||
+ !(local->hw.flags & IEEE80211_HW_CHANCTX_STA_CSA)) {
+ sdata_info(sdata,
+ "not handling chan-switch with channel contexts\n");
+ ieee80211_queue_work(&local->hw,
+ &ifmgd->csa_connection_drop_work);
+ mutex_unlock(&local->chanctx_mtx);
+ return;
+ }
}
- mutex_lock(&local->chanctx_mtx);
if (WARN_ON(!rcu_access_pointer(sdata->vif.chanctx_conf))) {
+ ieee80211_queue_work(&local->hw,
+ &ifmgd->csa_connection_drop_work);
mutex_unlock(&local->chanctx_mtx);
return;
}
@@ -1955,6 +1983,7 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
true, frame_buf);
ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
+ sdata->vif.csa_active = false;
ieee80211_wake_queues_by_reason(&sdata->local->hw,
IEEE80211_MAX_QUEUE_MAP,
IEEE80211_QUEUE_STOP_REASON_CSA);
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
