Hi Tobias, > As the subject suggests, I am trying to use the SD8787 on a PPC > system. I have found a few endian related issues (submitted a few > hours ago), but it is still not working. > > So my first question, has anyone successfully used an mwifiex device > on a big endian system? AFAIK, you are probably the first one to try on a big endian system ;) > > Also, I have found that the chip seems to signal interrupts before its > internal registers are in a consistent state. Specifically, the > sdio_ireg and wr_bitmask seems to be out of sync. Inserting a small > delay in mwifiex_interrupt_status (sdio.c), currently 50 us solves the > problem. Is there some bit that should be polled here to make sure that > the registers are in a consistent state? Can you enable dynamic debug and post the logs showing the register mismatch? Thanks, Bing -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
