On Friday 23 August 2013 at 07:23:00, Rymarkiewicz, WaldemarX wrote: > Hi Lars, > > >This adds a driver for the nxp pn532 nfc chip. > >It is not meant for merging. Instead it is meant to show that some > >progress has been made and what the current state is and to help > >testing. > >Although I can do some basic things with this driver I expect it to > >contain lots of bugs. Be aware! > >This driver is heavily based on the pn533 driver and duplicates much > >code. This has do be factored out some time. > > I'm not sure if this is expected approach adding new drivers. You > duplicates most of pn533 code which is not good. Yes, I know that and I explicitly mentioned that. I had to get this chip working somehow and I had to begin somewhere. The pn533 driver is really very hard to understand with it's massive use of nested callbacks, workqueues and usb urbs. So I took the approach to try to understand what happens while modifying and would then later factor out what both drivers have in common. The other way is understanding the code first and then decide what would be needed for both chips, factor that out and then write the pn532 uart specific stuff. And this uart stuff is a pain itself in linux. This way seemed much harder to me, especially as I have no pn533 device to test which things will break. > Also, note that pn533 and pn532 are pretty the same chips (with small > differences) and it would be quite natural to support both with one > driver. Pn533 already reads chip version on init, so at this point you > already know with which chip you are dealing with. > > I suggest to separate transport layer from the core in pn533 and add > support for uart and usb separately. This is exactly what I've planned > while changing pn533 to support acr122 device. Yes, I agree with you this should be done. I'll expect it to be challenging but based on my previous work this could be doable. I'll look into that in my next free timeslot. I'll not be able to do that in the next two months. Sorry. Thank you for your comments, Lars -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
