Adding hal.h
Signed-off-by: Eugene Krasnikov <k.eugene.e@xxxxxxxxx>
---
drivers/net/wireless/ath/wcn36xx/hal.h | 4657 ++++++++++++++++++++++++++++++++
1 file changed, 4657 insertions(+)
create mode 100644 drivers/net/wireless/ath/wcn36xx/hal.h
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
new file mode 100644
index 0000000..56da0dc
--- /dev/null
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -0,0 +1,4657 @@
+/*
+ * Copyright (c) 2013 Eugene Krasnikov <k.eugene.e@xxxxxxxxx>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _HAL_H_
+#define _HAL_H_
+
+/*---------------------------------------------------------------------------
+ API VERSIONING INFORMATION
+
+ The RIVA API is versioned as MAJOR.MINOR.VERSION.REVISION
+ The MAJOR is incremented for major product/architecture changes
+ (and then MINOR/VERSION/REVISION are zeroed)
+ The MINOR is incremented for minor product/architecture changes
+ (and then VERSION/REVISION are zeroed)
+ The VERSION is incremented if a significant API change occurs
+ (and then REVISION is zeroed)
+ The REVISION is incremented if an insignificant API change occurs
+ or if a new API is added
+ All values are in the range 0..255 (ie they are 8-bit values)
+ ---------------------------------------------------------------------------*/
+#define WCN36XX_HAL_VER_MAJOR 1
+#define WCN36XX_HAL_VER_MINOR 4
+#define WCN36XX_HAL_VER_VERSION 1
+#define WCN36XX_HAL_VER_REVISION 2
+
+/* This is to force compiler to use the maximum of an int ( 4 bytes ) */
+#define WCN36XX_HAL_MAX_ENUM_SIZE 0x7FFFFFFF
+#define WCN36XX_HAL_MSG_TYPE_MAX_ENUM_SIZE 0x7FFF
+
+/* Max no. of transmit categories */
+#define STACFG_MAX_TC 8
+
+/* The maximum value of access category */
+#define WCN36XX_HAL_MAX_AC 4
+
+#define WCN36XX_HAL_IPV4_ADDR_LEN 4
+
+#define WALN_HAL_STA_INVALID_IDX 0xFF
+#define WCN36XX_HAL_BSS_INVALID_IDX 0xFF
+
+/* Default Beacon template size */
+#define BEACON_TEMPLATE_SIZE 0x180
+
+/* Param Change Bitmap sent to HAL */
+#define PARAM_BCN_INTERVAL_CHANGED (1 << 0)
+#define PARAM_SHORT_PREAMBLE_CHANGED (1 << 1)
+#define PARAM_SHORT_SLOT_TIME_CHANGED (1 << 2)
+#define PARAM_llACOEXIST_CHANGED (1 << 3)
+#define PARAM_llBCOEXIST_CHANGED (1 << 4)
+#define PARAM_llGCOEXIST_CHANGED (1 << 5)
+#define PARAM_HT20MHZCOEXIST_CHANGED (1<<6)
+#define PARAM_NON_GF_DEVICES_PRESENT_CHANGED (1<<7)
+#define PARAM_RIFS_MODE_CHANGED (1<<8)
+#define PARAM_LSIG_TXOP_FULL_SUPPORT_CHANGED (1<<9)
+#define PARAM_OBSS_MODE_CHANGED (1<<10)
+#define PARAM_BEACON_UPDATE_MASK \
+ (PARAM_BCN_INTERVAL_CHANGED | \
+ PARAM_SHORT_PREAMBLE_CHANGED | \
+ PARAM_SHORT_SLOT_TIME_CHANGED | \
+ PARAM_llACOEXIST_CHANGED | \
+ PARAM_llBCOEXIST_CHANGED | \
+ PARAM_llGCOEXIST_CHANGED | \
+ PARAM_HT20MHZCOEXIST_CHANGED | \
+ PARAM_NON_GF_DEVICES_PRESENT_CHANGED | \
+ PARAM_RIFS_MODE_CHANGED | \
+ PARAM_LSIG_TXOP_FULL_SUPPORT_CHANGED | \
+ PARAM_OBSS_MODE_CHANGED)
+
+/* dump command response Buffer size */
+#define DUMPCMD_RSP_BUFFER 100
+
+/* version string max length (including NULL) */
+#define WCN36XX_HAL_VERSION_LENGTH 64
+
+/* message types for messages exchanged between WDI and HAL */
+enum wcn36xx_hal_host_msg_type {
+ /* Init/De-Init */
+ WCN36XX_HAL_START_REQ = 0,
+ WCN36XX_HAL_START_RSP = 1,
+ WCN36XX_HAL_STOP_REQ = 2,
+ WCN36XX_HAL_STOP_RSP = 3,
+
+ /* Scan */
+ WCN36XX_HAL_INIT_SCAN_REQ = 4,
+ WCN36XX_HAL_INIT_SCAN_RSP = 5,
+ WCN36XX_HAL_START_SCAN_REQ = 6,
+ WCN36XX_HAL_START_SCAN_RSP = 7,
+ WCN36XX_HAL_END_SCAN_REQ = 8,
+ WCN36XX_HAL_END_SCAN_RSP = 9,
+ WCN36XX_HAL_FINISH_SCAN_REQ = 10,
+ WCN36XX_HAL_FINISH_SCAN_RSP = 11,
+
+ /* HW STA configuration/deconfiguration */
+ WCN36XX_HAL_CONFIG_STA_REQ = 12,
+ WCN36XX_HAL_CONFIG_STA_RSP = 13,
+ WCN36XX_HAL_DELETE_STA_REQ = 14,
+ WCN36XX_HAL_DELETE_STA_RSP = 15,
+ WCN36XX_HAL_CONFIG_BSS_REQ = 16,
+ WCN36XX_HAL_CONFIG_BSS_RSP = 17,
+ WCN36XX_HAL_DELETE_BSS_REQ = 18,
+ WCN36XX_HAL_DELETE_BSS_RSP = 19,
+
+ /* Infra STA asscoiation */
+ WCN36XX_HAL_JOIN_REQ = 20,
+ WCN36XX_HAL_JOIN_RSP = 21,
+ WCN36XX_HAL_POST_ASSOC_REQ = 22,
+ WCN36XX_HAL_POST_ASSOC_RSP = 23,
+
+ /* Security */
+ WCN36XX_HAL_SET_BSSKEY_REQ = 24,
+ WCN36XX_HAL_SET_BSSKEY_RSP = 25,
+ WCN36XX_HAL_SET_STAKEY_REQ = 26,
+ WCN36XX_HAL_SET_STAKEY_RSP = 27,
+ WCN36XX_HAL_RMV_BSSKEY_REQ = 28,
+ WCN36XX_HAL_RMV_BSSKEY_RSP = 29,
+ WCN36XX_HAL_RMV_STAKEY_REQ = 30,
+ WCN36XX_HAL_RMV_STAKEY_RSP = 31,
+
+ /* Qos Related */
+ WCN36XX_HAL_ADD_TS_REQ = 32,
+ WCN36XX_HAL_ADD_TS_RSP = 33,
+ WCN36XX_HAL_DEL_TS_REQ = 34,
+ WCN36XX_HAL_DEL_TS_RSP = 35,
+ WCN36XX_HAL_UPD_EDCA_PARAMS_REQ = 36,
+ WCN36XX_HAL_UPD_EDCA_PARAMS_RSP = 37,
+ WCN36XX_HAL_ADD_BA_REQ = 38,
+ WCN36XX_HAL_ADD_BA_RSP = 39,
+ WCN36XX_HAL_DEL_BA_REQ = 40,
+ WCN36XX_HAL_DEL_BA_RSP = 41,
+
+ WCN36XX_HAL_CH_SWITCH_REQ = 42,
+ WCN36XX_HAL_CH_SWITCH_RSP = 43,
+ WCN36XX_HAL_SET_LINK_ST_REQ = 44,
+ WCN36XX_HAL_SET_LINK_ST_RSP = 45,
+ WCN36XX_HAL_GET_STATS_REQ = 46,
+ WCN36XX_HAL_GET_STATS_RSP = 47,
+ WCN36XX_HAL_UPDATE_CFG_REQ = 48,
+ WCN36XX_HAL_UPDATE_CFG_RSP = 49,
+
+ WCN36XX_HAL_MISSED_BEACON_IND = 50,
+ WCN36XX_HAL_UNKNOWN_ADDR2_FRAME_RX_IND = 51,
+ WCN36XX_HAL_MIC_FAILURE_IND = 52,
+ WCN36XX_HAL_FATAL_ERROR_IND = 53,
+ WCN36XX_HAL_SET_KEYDONE_MSG = 54,
+
+ /* NV Interface */
+ WCN36XX_HAL_DOWNLOAD_NV_REQ = 55,
+ WCN36XX_HAL_DOWNLOAD_NV_RSP = 56,
+
+ WCN36XX_HAL_ADD_BA_SESSION_REQ = 57,
+ WCN36XX_HAL_ADD_BA_SESSION_RSP = 58,
+ WCN36XX_HAL_TRIGGER_BA_REQ = 59,
+ WCN36XX_HAL_TRIGGER_BA_RSP = 60,
+ WCN36XX_HAL_UPDATE_BEACON_REQ = 61,
+ WCN36XX_HAL_UPDATE_BEACON_RSP = 62,
+ WCN36XX_HAL_SEND_BEACON_REQ = 63,
+ WCN36XX_HAL_SEND_BEACON_RSP = 64,
+
+ WCN36XX_HAL_SET_BCASTKEY_REQ = 65,
+ WCN36XX_HAL_SET_BCASTKEY_RSP = 66,
+ WCN36XX_HAL_DELETE_STA_CONTEXT_IND = 67,
+ WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_REQ = 68,
+ WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_RSP = 69,
+
+ /* PTT interface support */
+ WCN36XX_HAL_PROCESS_PTT_REQ = 70,
+ WCN36XX_HAL_PROCESS_PTT_RSP = 71,
+
+ /* BTAMP related events */
+ WCN36XX_HAL_SIGNAL_BTAMP_EVENT_REQ = 72,
+ WCN36XX_HAL_SIGNAL_BTAMP_EVENT_RSP = 73,
+ WCN36XX_HAL_TL_HAL_FLUSH_AC_REQ = 74,
+ WCN36XX_HAL_TL_HAL_FLUSH_AC_RSP = 75,
+
+ WCN36XX_HAL_ENTER_IMPS_REQ = 76,
+ WCN36XX_HAL_EXIT_IMPS_REQ = 77,
+ WCN36XX_HAL_ENTER_BMPS_REQ = 78,
+ WCN36XX_HAL_EXIT_BMPS_REQ = 79,
+ WCN36XX_HAL_ENTER_UAPSD_REQ = 80,
+ WCN36XX_HAL_EXIT_UAPSD_REQ = 81,
+ WCN36XX_HAL_UPDATE_UAPSD_PARAM_REQ = 82,
+ WCN36XX_HAL_CONFIGURE_RXP_FILTER_REQ = 83,
+ WCN36XX_HAL_ADD_BCN_FILTER_REQ = 84,
+ WCN36XX_HAL_REM_BCN_FILTER_REQ = 85,
+ WCN36XX_HAL_ADD_WOWL_BCAST_PTRN = 86,
+ WCN36XX_HAL_DEL_WOWL_BCAST_PTRN = 87,
+ WCN36XX_HAL_ENTER_WOWL_REQ = 88,
+ WCN36XX_HAL_EXIT_WOWL_REQ = 89,
+ WCN36XX_HAL_HOST_OFFLOAD_REQ = 90,
+ WCN36XX_HAL_SET_RSSI_THRESH_REQ = 91,
+ WCN36XX_HAL_GET_RSSI_REQ = 92,
+ WCN36XX_HAL_SET_UAPSD_AC_PARAMS_REQ = 93,
+ WCN36XX_HAL_CONFIGURE_APPS_CPU_WAKEUP_STATE_REQ = 94,
+
+ WCN36XX_HAL_ENTER_IMPS_RSP = 95,
+ WCN36XX_HAL_EXIT_IMPS_RSP = 96,
+ WCN36XX_HAL_ENTER_BMPS_RSP = 97,
+ WCN36XX_HAL_EXIT_BMPS_RSP = 98,
+ WCN36XX_HAL_ENTER_UAPSD_RSP = 99,
+ WCN36XX_HAL_EXIT_UAPSD_RSP = 100,
+ WCN36XX_HAL_SET_UAPSD_AC_PARAMS_RSP = 101,
+ WCN36XX_HAL_UPDATE_UAPSD_PARAM_RSP = 102,
+ WCN36XX_HAL_CONFIGURE_RXP_FILTER_RSP = 103,
+ WCN36XX_HAL_ADD_BCN_FILTER_RSP = 104,
+ WCN36XX_HAL_REM_BCN_FILTER_RSP = 105,
+ WCN36XX_HAL_SET_RSSI_THRESH_RSP = 106,
+ WCN36XX_HAL_HOST_OFFLOAD_RSP = 107,
+ WCN36XX_HAL_ADD_WOWL_BCAST_PTRN_RSP = 108,
+ WCN36XX_HAL_DEL_WOWL_BCAST_PTRN_RSP = 109,
+ WCN36XX_HAL_ENTER_WOWL_RSP = 110,
+ WCN36XX_HAL_EXIT_WOWL_RSP = 111,
+ WCN36XX_HAL_RSSI_NOTIFICATION_IND = 112,
+ WCN36XX_HAL_GET_RSSI_RSP = 113,
+ WCN36XX_HAL_CONFIGURE_APPS_CPU_WAKEUP_STATE_RSP = 114,
+
+ /* 11k related events */
+ WCN36XX_HAL_SET_MAX_TX_POWER_REQ = 115,
+ WCN36XX_HAL_SET_MAX_TX_POWER_RSP = 116,
+
+ /* 11R related msgs */
+ WCN36XX_HAL_AGGR_ADD_TS_REQ = 117,
+ WCN36XX_HAL_AGGR_ADD_TS_RSP = 118,
+
+ /* P2P WLAN_FEATURE_P2P */
+ WCN36XX_HAL_SET_P2P_GONOA_REQ = 119,
+ WCN36XX_HAL_SET_P2P_GONOA_RSP = 120,
+
+ /* WLAN Dump commands */
+ WCN36XX_HAL_DUMP_COMMAND_REQ = 121,
+ WCN36XX_HAL_DUMP_COMMAND_RSP = 122,
+
+ /* OEM_DATA FEATURE SUPPORT */
+ WCN36XX_HAL_START_OEM_DATA_REQ = 123,
+ WCN36XX_HAL_START_OEM_DATA_RSP = 124,
+
+ /* ADD SELF STA REQ and RSP */
+ WCN36XX_HAL_ADD_STA_SELF_REQ = 125,
+ WCN36XX_HAL_ADD_STA_SELF_RSP = 126,
+
+ /* DEL SELF STA SUPPORT */
+ WCN36XX_HAL_DEL_STA_SELF_REQ = 127,
+ WCN36XX_HAL_DEL_STA_SELF_RSP = 128,
+
+ /* Coex Indication */
+ WCN36XX_HAL_COEX_IND = 129,
+
+ /* Tx Complete Indication */
+ WCN36XX_HAL_OTA_TX_COMPL_IND = 130,
+
+ /* Host Suspend/resume messages */
+ WCN36XX_HAL_HOST_SUSPEND_IND = 131,
+ WCN36XX_HAL_HOST_RESUME_REQ = 132,
+ WCN36XX_HAL_HOST_RESUME_RSP = 133,
+
+ WCN36XX_HAL_SET_TX_POWER_REQ = 134,
+ WCN36XX_HAL_SET_TX_POWER_RSP = 135,
+ WCN36XX_HAL_GET_TX_POWER_REQ = 136,
+ WCN36XX_HAL_GET_TX_POWER_RSP = 137,
+
+ WCN36XX_HAL_P2P_NOA_ATTR_IND = 138,
+
+ WCN36XX_HAL_ENABLE_RADAR_DETECT_REQ = 139,
+ WCN36XX_HAL_ENABLE_RADAR_DETECT_RSP = 140,
+ WCN36XX_HAL_GET_TPC_REPORT_REQ = 141,
+ WCN36XX_HAL_GET_TPC_REPORT_RSP = 142,
+ WCN36XX_HAL_RADAR_DETECT_IND = 143,
+ WCN36XX_HAL_RADAR_DETECT_INTR_IND = 144,
+ WCN36XX_HAL_KEEP_ALIVE_REQ = 145,
+ WCN36XX_HAL_KEEP_ALIVE_RSP = 146,
+
+ /* PNO messages */
+ WCN36XX_HAL_SET_PREF_NETWORK_REQ = 147,
+ WCN36XX_HAL_SET_PREF_NETWORK_RSP = 148,
+ WCN36XX_HAL_SET_RSSI_FILTER_REQ = 149,
+ WCN36XX_HAL_SET_RSSI_FILTER_RSP = 150,
+ WCN36XX_HAL_UPDATE_SCAN_PARAM_REQ = 151,
+ WCN36XX_HAL_UPDATE_SCAN_PARAM_RSP = 152,
+ WCN36XX_HAL_PREF_NETW_FOUND_IND = 153,
+
+ WCN36XX_HAL_SET_TX_PER_TRACKING_REQ = 154,
+ WCN36XX_HAL_SET_TX_PER_TRACKING_RSP = 155,
+ WCN36XX_HAL_TX_PER_HIT_IND = 156,
+
+ WCN36XX_HAL_8023_MULTICAST_LIST_REQ = 157,
+ WCN36XX_HAL_8023_MULTICAST_LIST_RSP = 158,
+
+ WCN36XX_HAL_SET_PACKET_FILTER_REQ = 159,
+ WCN36XX_HAL_SET_PACKET_FILTER_RSP = 160,
+ WCN36XX_HAL_PACKET_FILTER_MATCH_COUNT_REQ = 161,
+ WCN36XX_HAL_PACKET_FILTER_MATCH_COUNT_RSP = 162,
+ WCN36XX_HAL_CLEAR_PACKET_FILTER_REQ = 163,
+ WCN36XX_HAL_CLEAR_PACKET_FILTER_RSP = 164,
+
+ /*
+ * This is temp fix. Should be removed once Host and Riva code is
+ * in sync.
+ */
+ WCN36XX_HAL_INIT_SCAN_CON_REQ = 165,
+
+ WCN36XX_HAL_SET_POWER_PARAMS_REQ = 166,
+ WCN36XX_HAL_SET_POWER_PARAMS_RSP = 167,
+
+ WCN36XX_HAL_TSM_STATS_REQ = 168,
+ WCN36XX_HAL_TSM_STATS_RSP = 169,
+
+ /* wake reason indication (WOW) */
+ WCN36XX_HAL_WAKE_REASON_IND = 170,
+
+ /* GTK offload support */
+ WCN36XX_HAL_GTK_OFFLOAD_REQ = 171,
+ WCN36XX_HAL_GTK_OFFLOAD_RSP = 172,
+ WCN36XX_HAL_GTK_OFFLOAD_GETINFO_REQ = 173,
+ WCN36XX_HAL_GTK_OFFLOAD_GETINFO_RSP = 174,
+
+ WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_REQ = 175,
+ WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_RSP = 176,
+ WCN36XX_HAL_EXCLUDE_UNENCRYPTED_IND = 177,
+
+ WCN36XX_HAL_SET_THERMAL_MITIGATION_REQ = 178,
+ WCN36XX_HAL_SET_THERMAL_MITIGATION_RSP = 179,
+
+ WCN36XX_HAL_UPDATE_VHT_OP_MODE_REQ = 182,
+ WCN36XX_HAL_UPDATE_VHT_OP_MODE_RSP = 183,
+
+ WCN36XX_HAL_P2P_NOA_START_IND = 184,
+
+ WCN36XX_HAL_GET_ROAM_RSSI_REQ = 185,
+ WCN36XX_HAL_GET_ROAM_RSSI_RSP = 186,
+
+ WCN36XX_HAL_CLASS_B_STATS_IND = 187,
+ WCN36XX_HAL_DEL_BA_IND = 188,
+ WCN36XX_HAL_DHCP_START_IND = 189,
+ WCN36XX_HAL_DHCP_STOP_IND = 190,
+
+ WCN36XX_HAL_MSG_MAX = WCN36XX_HAL_MSG_TYPE_MAX_ENUM_SIZE
+};
+
+/* Enumeration for Version */
+enum wcn36xx_hal_host_msg_version {
+ WCN36XX_HAL_MSG_VERSION0 = 0,
+ WCN36XX_HAL_MSG_VERSION1 = 1,
+ /* define as 2 bytes data */
+ WCN36XX_HAL_MSG_WCNSS_CTRL_VERSION = 0x7FFF,
+ WCN36XX_HAL_MSG_VERSION_MAX_FIELD = WCN36XX_HAL_MSG_WCNSS_CTRL_VERSION
+};
+
+enum driver_type {
+ DRIVER_TYPE_PRODUCTION = 0,
+ DRIVER_TYPE_MFG = 1,
+ DRIVER_TYPE_DVT = 2,
+ DRIVER_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+enum wcn36xx_hal_stop_type {
+ HAL_STOP_TYPE_SYS_RESET,
+ HAL_STOP_TYPE_SYS_DEEP_SLEEP,
+ HAL_STOP_TYPE_RF_KILL,
+ HAL_STOP_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+enum wcn36xx_hal_sys_mode {
+ HAL_SYS_MODE_NORMAL,
+ HAL_SYS_MODE_LEARN,
+ HAL_SYS_MODE_SCAN,
+ HAL_SYS_MODE_PROMISC,
+ HAL_SYS_MODE_SUSPEND_LINK,
+ HAL_SYS_MODE_ROAM_SCAN,
+ HAL_SYS_MODE_ROAM_SUSPEND_LINK,
+ HAL_SYS_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+enum phy_chan_bond_state {
+ /* 20MHz IF bandwidth centered on IF carrier */
+ PHY_SINGLE_CHANNEL_CENTERED = 0,
+
+ /* 40MHz IF bandwidth with lower 20MHz supporting the primary channel */
+ PHY_DOUBLE_CHANNEL_LOW_PRIMARY = 1,
+
+ /* 40MHz IF bandwidth centered on IF carrier */
+ PHY_DOUBLE_CHANNEL_CENTERED = 2,
+
+ /* 40MHz IF bandwidth with higher 20MHz supporting the primary ch */
+ PHY_DOUBLE_CHANNEL_HIGH_PRIMARY = 3,
+
+ /* 20/40MHZ offset LOW 40/80MHZ offset CENTERED */
+ PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_CENTERED = 4,
+
+ /* 20/40MHZ offset CENTERED 40/80MHZ offset CENTERED */
+ PHY_QUADRUPLE_CHANNEL_20MHZ_CENTERED_40MHZ_CENTERED = 5,
+
+ /* 20/40MHZ offset HIGH 40/80MHZ offset CENTERED */
+ PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_CENTERED = 6,
+
+ /* 20/40MHZ offset LOW 40/80MHZ offset LOW */
+ PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW = 7,
+
+ /* 20/40MHZ offset HIGH 40/80MHZ offset LOW */
+ PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW = 8,
+
+ /* 20/40MHZ offset LOW 40/80MHZ offset HIGH */
+ PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH = 9,
+
+ /* 20/40MHZ offset-HIGH 40/80MHZ offset HIGH */
+ PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH = 10,
+
+ PHY_CHANNEL_BONDING_STATE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+/* Spatial Multiplexing(SM) Power Save mode */
+enum wcn36xx_hal_ht_mimo_state {
+ /* Static SM Power Save mode */
+ WCN36XX_HAL_HT_MIMO_PS_STATIC = 0,
+
+ /* Dynamic SM Power Save mode */
+ WCN36XX_HAL_HT_MIMO_PS_DYNAMIC = 1,
+
+ /* reserved */
+ WCN36XX_HAL_HT_MIMO_PS_NA = 2,
+
+ /* SM Power Save disabled */
+ WCN36XX_HAL_HT_MIMO_PS_NO_LIMIT = 3,
+
+ WCN36XX_HAL_HT_MIMO_PS_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+/* each station added has a rate mode which specifies the sta attributes */
+enum sta_rate_mode {
+ STA_TAURUS = 0,
+ STA_TITAN,
+ STA_POLARIS,
+ STA_11b,
+ STA_11bg,
+ STA_11a,
+ STA_11n,
+ STA_11ac,
+ STA_INVALID_RATE_MODE = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+/* 1,2,5.5,11 */
+#define WCN36XX_HAL_NUM_DSSS_RATES 4
+
+/* 6,9,12,18,24,36,48,54 */
+#define WCN36XX_HAL_NUM_OFDM_RATES 8
+
+/* 72,96,108 */
+#define WCN36XX_HAL_NUM_POLARIS_RATES 3
+
+#define WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET 16
+
+enum wcn36xx_hal_bss_type {
+ WCN36XX_HAL_INFRASTRUCTURE_MODE,
+
+ /* Added for softAP support */
+ WCN36XX_HAL_INFRA_AP_MODE,
+
+ WCN36XX_HAL_IBSS_MODE,
+
+ /* Added for BT-AMP support */
+ WCN36XX_HAL_BTAMP_STA_MODE,
+
+ /* Added for BT-AMP support */
+ WCN36XX_HAL_BTAMP_AP_MODE,
+
+ WCN36XX_HAL_AUTO_MODE,
+
+ WCN36XX_HAL_DONOT_USE_BSS_TYPE = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+enum wcn36xx_hal_nw_type {
+ WCN36XX_HAL_11A_NW_TYPE,
+ WCN36XX_HAL_11B_NW_TYPE,
+ WCN36XX_HAL_11G_NW_TYPE,
+ WCN36XX_HAL_11N_NW_TYPE,
+ WCN36XX_HAL_DONOT_USE_NW_TYPE = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+#define WCN36XX_HAL_MAC_RATESET_EID_MAX 12
+
+enum wcn36xx_hal_ht_operating_mode {
+ /* No Protection */
+ WCN36XX_HAL_HT_OP_MODE_PURE,
+
+ /* Overlap Legacy device present, protection is optional */
+ WCN36XX_HAL_HT_OP_MODE_OVERLAP_LEGACY,
+
+ /* No legacy device, but 20 MHz HT present */
+ WCN36XX_HAL_HT_OP_MODE_NO_LEGACY_20MHZ_HT,
+
+ /* Protection is required */
+ WCN36XX_HAL_HT_OP_MODE_MIXED,
+
+ WCN36XX_HAL_HT_OP_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+/* Encryption type enum used with peer */
+enum ani_ed_type {
+ WCN36XX_HAL_ED_NONE,
+ WCN36XX_HAL_ED_WEP40,
+ WCN36XX_HAL_ED_WEP104,
+ WCN36XX_HAL_ED_TKIP,
+ WCN36XX_HAL_ED_CCMP,
+ WCN36XX_HAL_ED_WPI,
+ WCN36XX_HAL_ED_AES_128_CMAC,
+ WCN36XX_HAL_ED_NOT_IMPLEMENTED = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+#define WLAN_MAX_KEY_RSC_LEN 16
+#define WLAN_WAPI_KEY_RSC_LEN 16
+
+/* MAX key length when ULA is used */
+#define WCN36XX_HAL_MAC_MAX_KEY_LENGTH 32
+#define WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS 4
+
+/*
+ * Enum to specify whether key is used for TX only, RX only or both.
+ */
+enum ani_key_direction {
+ WCN36XX_HAL_TX_ONLY,
+ WCN36XX_HAL_RX_ONLY,
+ WCN36XX_HAL_TX_RX,
+ WCN36XX_HAL_TX_DEFAULT,
+ WCN36XX_HAL_DONOT_USE_KEY_DIRECTION = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+enum ani_wep_type {
+ WCN36XX_HAL_WEP_STATIC,
+ WCN36XX_HAL_WEP_DYNAMIC,
+ WCN36XX_HAL_WEP_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+enum wcn36xx_hal_link_state {
+
+ WCN36XX_HAL_LINK_IDLE_STATE = 0,
+ WCN36XX_HAL_LINK_PREASSOC_STATE = 1,
+ WCN36XX_HAL_LINK_POSTASSOC_STATE = 2,
+ WCN36XX_HAL_LINK_AP_STATE = 3,
+ WCN36XX_HAL_LINK_IBSS_STATE = 4,
+
+ /* BT-AMP Case */
+ WCN36XX_HAL_LINK_BTAMP_PREASSOC_STATE = 5,
+ WCN36XX_HAL_LINK_BTAMP_POSTASSOC_STATE = 6,
+ WCN36XX_HAL_LINK_BTAMP_AP_STATE = 7,
+ WCN36XX_HAL_LINK_BTAMP_STA_STATE = 8,
+
+ /* Reserved for HAL Internal Use */
+ WCN36XX_HAL_LINK_LEARN_STATE = 9,
+ WCN36XX_HAL_LINK_SCAN_STATE = 10,
+ WCN36XX_HAL_LINK_FINISH_SCAN_STATE = 11,
+ WCN36XX_HAL_LINK_INIT_CAL_STATE = 12,
+ WCN36XX_HAL_LINK_FINISH_CAL_STATE = 13,
+ WCN36XX_HAL_LINK_LISTEN_STATE = 14,
+
+ WCN36XX_HAL_LINK_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+enum wcn36xx_hal_stats_mask {
+ HAL_SUMMARY_STATS_INFO = 0x00000001,
+ HAL_GLOBAL_CLASS_A_STATS_INFO = 0x00000002,
+ HAL_GLOBAL_CLASS_B_STATS_INFO = 0x00000004,
+ HAL_GLOBAL_CLASS_C_STATS_INFO = 0x00000008,
+ HAL_GLOBAL_CLASS_D_STATS_INFO = 0x00000010,
+ HAL_PER_STA_STATS_INFO = 0x00000020
+};
+
+/* BT-AMP events type */
+enum bt_amp_event_type {
+ BTAMP_EVENT_CONNECTION_START,
+ BTAMP_EVENT_CONNECTION_STOP,
+ BTAMP_EVENT_CONNECTION_TERMINATED,
+
+ /* This and beyond are invalid values */
+ BTAMP_EVENT_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE,
+};
+
+/* PE Statistics */
+enum pe_stats_mask {
+ PE_SUMMARY_STATS_INFO = 0x00000001,
+ PE_GLOBAL_CLASS_A_STATS_INFO = 0x00000002,
+ PE_GLOBAL_CLASS_B_STATS_INFO = 0x00000004,
+ PE_GLOBAL_CLASS_C_STATS_INFO = 0x00000008,
+ PE_GLOBAL_CLASS_D_STATS_INFO = 0x00000010,
+ PE_PER_STA_STATS_INFO = 0x00000020,
+
+ /* This and beyond are invalid values */
+ PE_STATS_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+/*
+ * Configuration Parameter IDs
+ */
+#define WCN36XX_HAL_CFG_STA_ID 0
+#define WCN36XX_HAL_CFG_CURRENT_TX_ANTENNA 1
+#define WCN36XX_HAL_CFG_CURRENT_RX_ANTENNA 2
+#define WCN36XX_HAL_CFG_LOW_GAIN_OVERRIDE 3
+#define WCN36XX_HAL_CFG_POWER_STATE_PER_CHAIN 4
+#define WCN36XX_HAL_CFG_CAL_PERIOD 5
+#define WCN36XX_HAL_CFG_CAL_CONTROL 6
+#define WCN36XX_HAL_CFG_PROXIMITY 7
+#define WCN36XX_HAL_CFG_NETWORK_DENSITY 8
+#define WCN36XX_HAL_CFG_MAX_MEDIUM_TIME 9
+#define WCN36XX_HAL_CFG_MAX_MPDUS_IN_AMPDU 10
+#define WCN36XX_HAL_CFG_RTS_THRESHOLD 11
+#define WCN36XX_HAL_CFG_SHORT_RETRY_LIMIT 12
+#define WCN36XX_HAL_CFG_LONG_RETRY_LIMIT 13
+#define WCN36XX_HAL_CFG_FRAGMENTATION_THRESHOLD 14
+#define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_ZERO 15
+#define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_ONE 16
+#define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_TWO 17
+#define WCN36XX_HAL_CFG_FIXED_RATE 18
+#define WCN36XX_HAL_CFG_RETRYRATE_POLICY 19
+#define WCN36XX_HAL_CFG_RETRYRATE_SECONDARY 20
+#define WCN36XX_HAL_CFG_RETRYRATE_TERTIARY 21
+#define WCN36XX_HAL_CFG_FORCE_POLICY_PROTECTION 22
+#define WCN36XX_HAL_CFG_FIXED_RATE_MULTICAST_24GHZ 23
+#define WCN36XX_HAL_CFG_FIXED_RATE_MULTICAST_5GHZ 24
+#define WCN36XX_HAL_CFG_DEFAULT_RATE_INDEX_24GHZ 25
+#define WCN36XX_HAL_CFG_DEFAULT_RATE_INDEX_5GHZ 26
+#define WCN36XX_HAL_CFG_MAX_BA_SESSIONS 27
+#define WCN36XX_HAL_CFG_PS_DATA_INACTIVITY_TIMEOUT 28
+#define WCN36XX_HAL_CFG_PS_ENABLE_BCN_FILTER 29
+#define WCN36XX_HAL_CFG_PS_ENABLE_RSSI_MONITOR 30
+#define WCN36XX_HAL_CFG_NUM_BEACON_PER_RSSI_AVERAGE 31
+#define WCN36XX_HAL_CFG_STATS_PERIOD 32
+#define WCN36XX_HAL_CFG_CFP_MAX_DURATION 33
+#define WCN36XX_HAL_CFG_FRAME_TRANS_ENABLED 34
+#define WCN36XX_HAL_CFG_DTIM_PERIOD 35
+#define WCN36XX_HAL_CFG_EDCA_WMM_ACBK 36
+#define WCN36XX_HAL_CFG_EDCA_WMM_ACBE 37
+#define WCN36XX_HAL_CFG_EDCA_WMM_ACVO 38
+#define WCN36XX_HAL_CFG_EDCA_WMM_ACVI 39
+#define WCN36XX_HAL_CFG_BA_THRESHOLD_HIGH 40
+#define WCN36XX_HAL_CFG_MAX_BA_BUFFERS 41
+#define WCN36XX_HAL_CFG_RPE_POLLING_THRESHOLD 42
+#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC0_REG 43
+#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC1_REG 44
+#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC2_REG 45
+#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC3_REG 46
+#define WCN36XX_HAL_CFG_NO_OF_ONCHIP_REORDER_SESSIONS 47
+#define WCN36XX_HAL_CFG_PS_LISTEN_INTERVAL 48
+#define WCN36XX_HAL_CFG_PS_HEART_BEAT_THRESHOLD 49
+#define WCN36XX_HAL_CFG_PS_NTH_BEACON_FILTER 50
+#define WCN36XX_HAL_CFG_PS_MAX_PS_POLL 51
+#define WCN36XX_HAL_CFG_PS_MIN_RSSI_THRESHOLD 52
+#define WCN36XX_HAL_CFG_PS_RSSI_FILTER_PERIOD 53
+#define WCN36XX_HAL_CFG_PS_BROADCAST_FRAME_FILTER_ENABLE 54
+#define WCN36XX_HAL_CFG_PS_IGNORE_DTIM 55
+#define WCN36XX_HAL_CFG_PS_ENABLE_BCN_EARLY_TERM 56
+#define WCN36XX_HAL_CFG_DYNAMIC_PS_POLL_VALUE 57
+#define WCN36XX_HAL_CFG_PS_NULLDATA_AP_RESP_TIMEOUT 58
+#define WCN36XX_HAL_CFG_TELE_BCN_WAKEUP_EN 59
+#define WCN36XX_HAL_CFG_TELE_BCN_TRANS_LI 60
+#define WCN36XX_HAL_CFG_TELE_BCN_TRANS_LI_IDLE_BCNS 61
+#define WCN36XX_HAL_CFG_TELE_BCN_MAX_LI 62
+#define WCN36XX_HAL_CFG_TELE_BCN_MAX_LI_IDLE_BCNS 63
+#define WCN36XX_HAL_CFG_TX_PWR_CTRL_ENABLE 64
+#define WCN36XX_HAL_CFG_VALID_RADAR_CHANNEL_LIST 65
+#define WCN36XX_HAL_CFG_TX_POWER_24_20 66
+#define WCN36XX_HAL_CFG_TX_POWER_24_40 67
+#define WCN36XX_HAL_CFG_TX_POWER_50_20 68
+#define WCN36XX_HAL_CFG_TX_POWER_50_40 69
+#define WCN36XX_HAL_CFG_MCAST_BCAST_FILTER_SETTING 70
+#define WCN36XX_HAL_CFG_BCN_EARLY_TERM_WAKEUP_INTERVAL 71
+#define WCN36XX_HAL_CFG_MAX_TX_POWER_2_4 72
+#define WCN36XX_HAL_CFG_MAX_TX_POWER_5 73
+#define WCN36XX_HAL_CFG_INFRA_STA_KEEP_ALIVE_PERIOD 74
+#define WCN36XX_HAL_CFG_ENABLE_CLOSE_LOOP 75
+#define WCN36XX_HAL_CFG_BTC_EXECUTION_MODE 76
+#define WCN36XX_HAL_CFG_BTC_DHCP_BT_SLOTS_TO_BLOCK 77
+#define WCN36XX_HAL_CFG_BTC_A2DP_DHCP_BT_SUB_INTERVALS 78
+#define WCN36XX_HAL_CFG_PS_TX_INACTIVITY_TIMEOUT 79
+#define WCN36XX_HAL_CFG_WCNSS_API_VERSION 80
+#define WCN36XX_HAL_CFG_AP_KEEPALIVE_TIMEOUT 81
+#define WCN36XX_HAL_CFG_GO_KEEPALIVE_TIMEOUT 82
+#define WCN36XX_HAL_CFG_ENABLE_MC_ADDR_LIST 83
+#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_INQ_BT 84
+#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_PAGE_BT 85
+#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_CONN_BT 86
+#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_LE_BT 87
+#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_INQ_WLAN 88
+#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_PAGE_WLAN 89
+#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_CONN_WLAN 90
+#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_LE_WLAN 91
+#define WCN36XX_HAL_CFG_BTC_DYN_MAX_LEN_BT 92
+#define WCN36XX_HAL_CFG_BTC_DYN_MAX_LEN_WLAN 93
+#define WCN36XX_HAL_CFG_BTC_MAX_SCO_BLOCK_PERC 94
+#define WCN36XX_HAL_CFG_BTC_DHCP_PROT_ON_A2DP 95
+#define WCN36XX_HAL_CFG_BTC_DHCP_PROT_ON_SCO 96
+#define WCN36XX_HAL_CFG_ENABLE_UNICAST_FILTER 97
+#define WCN36XX_HAL_CFG_MAX_ASSOC_LIMIT 98
+#define WCN36XX_HAL_CFG_ENABLE_LPWR_IMG_TRANSITION 99
+#define WCN36XX_HAL_CFG_ENABLE_MCC_ADAPTIVE_SCHEDULER 100
+#define WCN36XX_HAL_CFG_ENABLE_DETECT_PS_SUPPORT 101
+#define WCN36XX_HAL_CFG_AP_LINK_MONITOR_TIMEOUT 102
+#define WCN36XX_HAL_CFG_BTC_DWELL_TIME_MULTIPLIER 103
+#define WCN36XX_HAL_CFG_ENABLE_TDLS_OXYGEN_MODE 104
+#define WCN36XX_HAL_CFG_MAX_PARAMS 105
+
+/* Message definitons - All the messages below need to be packed */
+
+/* Definition for HAL API Version. */
+struct wcnss_wlan_version {
+ u8 revision;
+ u8 version;
+ u8 minor;
+ u8 major;
+} __packed;
+
+/* Definition for Encryption Keys */
+struct wcn36xx_hal_keys {
+ u8 id;
+
+ /* 0 for multicast */
+ u8 unicast;
+
+ enum ani_key_direction direction;
+
+ /* Usage is unknown */
+ u8 rsc[WLAN_MAX_KEY_RSC_LEN];
+
+ /* =1 for authenticator,=0 for supplicant */
+ u8 pae_role;
+
+ u16 length;
+ u8 key[WCN36XX_HAL_MAC_MAX_KEY_LENGTH];
+} __packed;
+
+/*
+ * set_sta_key_params Moving here since it is shared by
+ * configbss/setstakey msgs
+ */
+struct wcn36xx_hal_set_sta_key_params {
+ /* STA Index */
+ u16 sta_index;
+
+ /* Encryption Type used with peer */
+ enum ani_ed_type enc_type;
+
+ /* STATIC/DYNAMIC - valid only for WEP */
+ enum ani_wep_type wep_type;
+
+ /* Default WEP key, valid only for static WEP, must between 0 and 3. */
+ u8 def_wep_idx;
+
+ /* valid only for non-static WEP encyrptions */
+ struct wcn36xx_hal_keys key[WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS];
+
+ /*
+ * Control for Replay Count, 1= Single TID based replay count on Tx
+ * 0 = Per TID based replay count on TX
+ */
+ u8 single_tid_rc;
+
+} __packed;
+
+/* 4-byte control message header used by HAL*/
+struct wcn36xx_hal_msg_header {
+ enum wcn36xx_hal_host_msg_type msg_type:16;
+ enum wcn36xx_hal_host_msg_version msg_version:16;
+ u32 len;
+} __packed;
+
+/* Config format required by HAL for each CFG item*/
+struct wcn36xx_hal_cfg {
+ /* Cfg Id. The Id required by HAL is exported by HAL
+ * in shared header file between UMAC and HAL.*/
+ u16 id;
+
+ /* Length of the Cfg. This parameter is used to go to next cfg
+ * in the TLV format.*/
+ u16 len;
+
+ /* Padding bytes for unaligned address's */
+ u16 pad_bytes;
+
+ /* Reserve bytes for making cfgVal to align address */
+ u16 reserve;
+
+ /* Following the uCfgLen field there should be a 'uCfgLen' bytes
+ * containing the uCfgValue ; u8 uCfgValue[uCfgLen] */
+} __packed;
+
+struct wcn36xx_hal_mac_start_parameters {
+ /* Drive Type - Production or FTM etc */
+ enum driver_type type;
+
+ /* Length of the config buffer */
+ u32 len;
+
+ /* Following this there is a TLV formatted buffer of length
+ * "len" bytes containing all config values.
+ * The TLV is expected to be formatted like this:
+ * 0 15 31 31+CFG_LEN-1 length-1
+ * | CFG_ID | CFG_LEN | CFG_BODY | CFG_ID |......|
+ */
+} __packed;
+
+struct wcn36xx_hal_mac_start_req_msg {
+ /* config buffer must start in TLV format just here */
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_mac_start_parameters params;
+} __packed;
+
+struct wcn36xx_hal_mac_start_rsp_params {
+ /* success or failure */
+ u16 status;
+
+ /* Max number of STA supported by the device */
+ u8 stations;
+
+ /* Max number of BSS supported by the device */
+ u8 bssids;
+
+ /* API Version */
+ struct wcnss_wlan_version version;
+
+ /* CRM build information */
+ u8 crm_version[WCN36XX_HAL_VERSION_LENGTH];
+
+ /* hardware/chipset/misc version information */
+ u8 wlan_version[WCN36XX_HAL_VERSION_LENGTH];
+
+} __packed;
+
+struct wcn36xx_hal_mac_start_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_mac_start_rsp_params start_rsp_params;
+} __packed;
+
+struct wcn36xx_hal_mac_stop_req_params {
+ /* The reason for which the device is being stopped */
+ enum wcn36xx_hal_stop_type reason;
+
+} __packed;
+
+struct wcn36xx_hal_mac_stop_req_msg {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_mac_stop_req_params stop_req_params;
+} __packed;
+
+struct wcn36xx_hal_mac_stop_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+} __packed;
+
+struct wcn36xx_hal_update_cfg_req_msg {
+ /*
+ * Note: The length specified in tHalUpdateCfgReqMsg messages should be
+ * header.msgLen = sizeof(tHalUpdateCfgReqMsg) + uConfigBufferLen
+ */
+ struct wcn36xx_hal_msg_header header;
+
+ /* Length of the config buffer. Allows UMAC to update multiple CFGs */
+ u32 len;
+
+ /*
+ * Following this there is a TLV formatted buffer of length
+ * "uConfigBufferLen" bytes containing all config values.
+ * The TLV is expected to be formatted like this:
+ * 0 15 31 31+CFG_LEN-1 length-1
+ * | CFG_ID | CFG_LEN | CFG_BODY | CFG_ID |......|
+ */
+
+} __packed;
+
+struct wcn36xx_hal_update_cfg_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+} __packed;
+
+/* Frame control field format (2 bytes) */
+struct wcn36xx_hal_mac_frame_ctl {
+
+#ifndef ANI_LITTLE_BIT_ENDIAN
+
+ u8 subType:4;
+ u8 type:2;
+ u8 protVer:2;
+
+ u8 order:1;
+ u8 wep:1;
+ u8 moreData:1;
+ u8 powerMgmt:1;
+ u8 retry:1;
+ u8 moreFrag:1;
+ u8 fromDS:1;
+ u8 toDS:1;
+
+#else
+
+ u8 protVer:2;
+ u8 type:2;
+ u8 subType:4;
+
+ u8 toDS:1;
+ u8 fromDS:1;
+ u8 moreFrag:1;
+ u8 retry:1;
+ u8 powerMgmt:1;
+ u8 moreData:1;
+ u8 wep:1;
+ u8 order:1;
+
+#endif
+
+};
+
+/* Sequence control field */
+struct wcn36xx_hal_mac_seq_ctl {
+ u8 fragNum:4;
+ u8 seqNumLo:4;
+ u8 seqNumHi:8;
+};
+
+/* Management header format */
+struct wcn36xx_hal_mac_mgmt_hdr {
+ struct wcn36xx_hal_mac_frame_ctl fc;
+ u8 durationLo;
+ u8 durationHi;
+ u8 da[6];
+ u8 sa[6];
+ u8 bssId[6];
+ struct wcn36xx_hal_mac_seq_ctl seqControl;
+};
+
+/* FIXME: pronto v1 apparently has 4 */
+#define WCN36XX_HAL_NUM_BSSID 2
+
+/* Scan Entry to hold active BSS idx's */
+struct wcn36xx_hal_scan_entry {
+ u8 bss_index[WCN36XX_HAL_NUM_BSSID];
+ u8 active_bss_count;
+};
+
+struct wcn36xx_hal_init_scan_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* LEARN - AP Role
+ SCAN - STA Role */
+ enum wcn36xx_hal_sys_mode mode;
+
+ /* BSSID of the BSS */
+ u8 bssid[ETH_ALEN];
+
+ /* Whether BSS needs to be notified */
+ u8 notify;
+
+ /* Kind of frame to be used for notifying the BSS (Data Null, QoS
+ * Null, or CTS to Self). Must always be a valid frame type. */
+ u8 frame_type;
+
+ /* UMAC has the option of passing the MAC frame to be used for
+ * notifying the BSS. If non-zero, HAL will use the MAC frame
+ * buffer pointed to by macMgmtHdr. If zero, HAL will generate the
+ * appropriate MAC frame based on frameType. */
+ u8 frame_len;
+
+ /* Following the framelength there is a MAC frame buffer if
+ * frameLength is non-zero. */
+ struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr;
+
+ /* Entry to hold number of active BSS idx's */
+ struct wcn36xx_hal_scan_entry scan_entry;
+};
+
+struct wcn36xx_hal_init_scan_con_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* LEARN - AP Role
+ SCAN - STA Role */
+ enum wcn36xx_hal_sys_mode mode;
+
+ /* BSSID of the BSS */
+ u8 bssid[ETH_ALEN];
+
+ /* Whether BSS needs to be notified */
+ u8 notify;
+
+ /* Kind of frame to be used for notifying the BSS (Data Null, QoS
+ * Null, or CTS to Self). Must always be a valid frame type. */
+ u8 frame_type;
+
+ /* UMAC has the option of passing the MAC frame to be used for
+ * notifying the BSS. If non-zero, HAL will use the MAC frame
+ * buffer pointed to by macMgmtHdr. If zero, HAL will generate the
+ * appropriate MAC frame based on frameType. */
+ u8 frame_length;
+
+ /* Following the framelength there is a MAC frame buffer if
+ * frameLength is non-zero. */
+ struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr;
+
+ /* Entry to hold number of active BSS idx's */
+ struct wcn36xx_hal_scan_entry scan_entry;
+
+ /* Single NoA usage in Scanning */
+ u8 use_noa;
+
+ /* Indicates the scan duration (in ms) */
+ u16 scan_duration;
+
+};
+
+struct wcn36xx_hal_init_scan_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+} __packed;
+
+struct wcn36xx_hal_start_scan_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Indicates the channel to scan */
+ u8 scan_channel;
+} __packed;
+
+struct wcn36xx_hal_start_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ u32 start_tsf[2];
+ u8 tx_mgmt_power;
+
+} __packed;
+
+struct wcn36xx_hal_end_scan_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Indicates the channel to stop scanning. Not used really. But
+ * retained for symmetry with "start Scan" message. It can also
+ * help in error check if needed. */
+ u8 scan_channel;
+} __packed;
+
+struct wcn36xx_hal_end_scan_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+} __packed;
+
+struct wcn36xx_hal_finish_scan_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Identifies the operational state of the AP/STA
+ * LEARN - AP Role SCAN - STA Role */
+ enum wcn36xx_hal_sys_mode mode;
+
+ /* Operating channel to tune to. */
+ u8 oper_channel;
+
+ /* Channel Bonding state If 20/40 MHz is operational, this will
+ * indicate the 40 MHz extension channel in combination with the
+ * control channel */
+ enum phy_chan_bond_state cb_state;
+
+ /* BSSID of the BSS */
+ u8 bssid[ETH_ALEN];
+
+ /* Whether BSS needs to be notified */
+ u8 notify;
+
+ /* Kind of frame to be used for notifying the BSS (Data Null, QoS
+ * Null, or CTS to Self). Must always be a valid frame type. */
+ u8 frame_type;
+
+ /* UMAC has the option of passing the MAC frame to be used for
+ * notifying the BSS. If non-zero, HAL will use the MAC frame
+ * buffer pointed to by macMgmtHdr. If zero, HAL will generate the
+ * appropriate MAC frame based on frameType. */
+ u8 frame_length;
+
+ /* Following the framelength there is a MAC frame buffer if
+ * frameLength is non-zero. */
+ struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr;
+
+ /* Entry to hold number of active BSS idx's */
+ struct wcn36xx_hal_scan_entry scan_entry;
+
+} __packed;
+
+struct wcn36xx_hal_finish_scan_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+} __packed;
+
+enum wcn36xx_hal_rate_index {
+ HW_RATE_INDEX_1MBPS = 0x82,
+ HW_RATE_INDEX_2MBPS = 0x84,
+ HW_RATE_INDEX_5_5MBPS = 0x8B,
+ HW_RATE_INDEX_6MBPS = 0x0C,
+ HW_RATE_INDEX_9MBPS = 0x12,
+ HW_RATE_INDEX_11MBPS = 0x96,
+ HW_RATE_INDEX_12MBPS = 0x18,
+ HW_RATE_INDEX_18MBPS = 0x24,
+ HW_RATE_INDEX_24MBPS = 0x30,
+ HW_RATE_INDEX_36MBPS = 0x48,
+ HW_RATE_INDEX_48MBPS = 0x60,
+ HW_RATE_INDEX_54MBPS = 0x6C
+};
+
+struct wcn36xx_hal_supported_rates {
+ /*
+ * For Self STA Entry: this represents Self Mode.
+ * For Peer Stations, this represents the mode of the peer.
+ * On Station:
+ *
+ * --this mode is updated when PE adds the Self Entry.
+ *
+ * -- OR when PE sends 'ADD_BSS' message and station context in BSS
+ * is used to indicate the mode of the AP.
+ *
+ * ON AP:
+ *
+ * -- this mode is updated when PE sends 'ADD_BSS' and Sta entry
+ * for that BSS is used to indicate the self mode of the AP.
+ *
+ * -- OR when a station is associated, PE sends 'ADD_STA' message
+ * with this mode updated.
+ */
+
+ enum sta_rate_mode op_rate_mode;
+
+ /* 11b, 11a and aniLegacyRates are IE rates which gives rate in
+ * unit of 500Kbps */
+ u16 dsss_rates[WCN36XX_HAL_NUM_DSSS_RATES];
+ u16 ofdm_rates[WCN36XX_HAL_NUM_OFDM_RATES];
+ u16 legacy_rates[WCN36XX_HAL_NUM_POLARIS_RATES];
+ u16 reserved;
+
+ /* Taurus only supports 26 Titan Rates(no ESF/concat Rates will be
+ * supported) First 26 bits are reserved for those Titan rates and
+ * the last 4 bits(bit28-31) for Taurus, 2(bit26-27) bits are
+ * reserved. */
+ /* Titan and Taurus Rates */
+ u32 enhanced_rate_bitmap;
+
+ /*
+ * 0-76 bits used, remaining reserved
+ * bits 0-15 and 32 should be set.
+ */
+ u8 supported_mcs_set[WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET];
+
+ /*
+ * RX Highest Supported Data Rate defines the highest data
+ * rate that the STA is able to receive, in unites of 1Mbps.
+ * This value is derived from "Supported MCS Set field" inside
+ * the HT capability element.
+ */
+ u16 rx_highest_data_rate;
+
+} __packed;
+
+struct wcn36xx_hal_config_sta_params {
+ /* BSSID of STA */
+ u8 bssid[ETH_ALEN];
+
+ /* ASSOC ID, as assigned by UMAC */
+ u16 aid;
+
+ /* STA entry Type: 0 - Self, 1 - Other/Peer, 2 - BSSID, 3 - BCAST */
+ u8 type;
+
+ /* Short Preamble Supported. */
+ u8 short_preamble_supported;
+
+ /* MAC Address of STA */
+ u8 mac[ETH_ALEN];
+
+ /* Listen interval of the STA */
+ u16 listen_interval;
+
+ /* Support for 11e/WMM */
+ u8 wmm_enabled;
+
+ /* 11n HT capable STA */
+ u8 ht_capable;
+
+ /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */
+ u8 tx_channel_width_set;
+
+ /* RIFS mode 0 - NA, 1 - Allowed */
+ u8 rifs_mode;
+
+ /* L-SIG TXOP Protection mechanism
+ 0 - No Support, 1 - Supported
+ SG - there is global field */
+ u8 lsig_txop_protection;
+
+ /* Max Ampdu Size supported by STA. TPE programming.
+ 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k */
+ u8 max_ampdu_size;
+
+ /* Max Ampdu density. Used by RA. 3 : 0~7 : 2^(11nAMPDUdensity -4) */
+ u8 max_ampdu_density;
+
+ /* Max AMSDU size 1 : 3839 bytes, 0 : 7935 bytes */
+ u8 max_amsdu_size;
+
+ /* Short GI support for 40Mhz packets */
+ u8 sgi_40mhz;
+
+ /* Short GI support for 20Mhz packets */
+ u8 sgi_20Mhz;
+
+ /* TODO move this parameter to the end for 3680 */
+ /* These rates are the intersection of peer and self capabilities. */
+ struct wcn36xx_hal_supported_rates supported_rates;
+
+ /* Robust Management Frame (RMF) enabled/disabled */
+ u8 rmf;
+
+ /* The unicast encryption type in the association */
+ u32 encrypt_type;
+
+ /* HAL should update the existing STA entry, if this flag is set. UMAC
+ will set this flag in case of RE-ASSOC, where we want to reuse the
+ old STA ID. 0 = Add, 1 = Update */
+ u8 action;
+
+ /* U-APSD Flags: 1b per AC. Encoded as follows:
+ b7 b6 b5 b4 b3 b2 b1 b0 =
+ X X X X BE BK VI VO */
+ u8 uapsd;
+
+ /* Max SP Length */
+ u8 max_sp_len;
+
+ /* 11n Green Field preamble support
+ 0 - Not supported, 1 - Supported */
+ u8 green_field_capable;
+
+ /* MIMO Power Save mode */
+ enum wcn36xx_hal_ht_mimo_state mimo_ps;
+
+ /* Delayed BA Support */
+ u8 delayed_ba_support;
+
+ /* Max AMPDU duration in 32us */
+ u8 max_ampdu_duration;
+
+ /* HT STA should set it to 1 if it is enabled in BSS. HT STA should
+ * set it to 0 if AP does not support it. This indication is sent
+ * to HAL and HAL uses this flag to pickup up appropriate 40Mhz
+ * rates. */
+ u8 dsss_cck_mode_40mhz;
+
+ /* Valid STA Idx when action=Update. Set to 0xFF when invalid!
+ * Retained for backward compalibity with existing HAL code */
+ u8 sta_index;
+
+ /* BSSID of BSS to which station is associated. Set to 0xFF when
+ * invalid. Retained for backward compalibity with existing HAL
+ * code */
+ u8 bssid_index;
+
+ u8 p2p;
+
+ /* TODO add this parameter for 3680. */
+ /* Reserved to align next field on a dword boundary */
+ /* u8 reserved; */
+} __packed;
+
+struct wcn36xx_hal_config_sta_req_msg {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_config_sta_params sta_params;
+} __packed;
+
+struct wcn36xx_hal_config_sta_params_v1 {
+ /* BSSID of STA */
+ u8 bssid[ETH_ALEN];
+
+ /* ASSOC ID, as assigned by UMAC */
+ u16 aid;
+
+ /* STA entry Type: 0 - Self, 1 - Other/Peer, 2 - BSSID, 3 - BCAST */
+ u8 type;
+
+ /* Short Preamble Supported. */
+ u8 short_preamble_supported;
+
+ /* MAC Address of STA */
+ u8 mac[ETH_ALEN];
+
+ /* Listen interval of the STA */
+ u16 listen_interval;
+
+ /* Support for 11e/WMM */
+ u8 wmm_enabled;
+
+ /* 11n HT capable STA */
+ u8 ht_capable;
+
+ /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */
+ u8 tx_channel_width_set;
+
+ /* RIFS mode 0 - NA, 1 - Allowed */
+ u8 rifs_mode;
+
+ /* L-SIG TXOP Protection mechanism
+ 0 - No Support, 1 - Supported
+ SG - there is global field */
+ u8 lsig_txop_protection;
+
+ /* Max Ampdu Size supported by STA. TPE programming.
+ 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k */
+ u8 max_ampdu_size;
+
+ /* Max Ampdu density. Used by RA. 3 : 0~7 : 2^(11nAMPDUdensity -4) */
+ u8 max_ampdu_density;
+
+ /* Max AMSDU size 1 : 3839 bytes, 0 : 7935 bytes */
+ u8 max_amsdu_size;
+
+ /* Short GI support for 40Mhz packets */
+ u8 sgi_40mhz;
+
+ /* Short GI support for 20Mhz packets */
+ u8 sgi_20Mhz;
+
+ /* Robust Management Frame (RMF) enabled/disabled */
+ u8 rmf;
+
+ /* The unicast encryption type in the association */
+ u32 encrypt_type;
+
+ /* HAL should update the existing STA entry, if this flag is set. UMAC
+ will set this flag in case of RE-ASSOC, where we want to reuse the
+ old STA ID. 0 = Add, 1 = Update */
+ u8 action;
+
+ /* U-APSD Flags: 1b per AC. Encoded as follows:
+ b7 b6 b5 b4 b3 b2 b1 b0 =
+ X X X X BE BK VI VO */
+ u8 uapsd;
+
+ /* Max SP Length */
+ u8 max_sp_len;
+
+ /* 11n Green Field preamble support
+ 0 - Not supported, 1 - Supported */
+ u8 green_field_capable;
+
+ /* MIMO Power Save mode */
+ enum wcn36xx_hal_ht_mimo_state mimo_ps;
+
+ /* Delayed BA Support */
+ u8 delayed_ba_support;
+
+ /* Max AMPDU duration in 32us */
+ u8 max_ampdu_duration;
+
+ /* HT STA should set it to 1 if it is enabled in BSS. HT STA should
+ * set it to 0 if AP does not support it. This indication is sent
+ * to HAL and HAL uses this flag to pickup up appropriate 40Mhz
+ * rates. */
+ u8 dsss_cck_mode_40mhz;
+
+ /* Valid STA Idx when action=Update. Set to 0xFF when invalid!
+ * Retained for backward compalibity with existing HAL code */
+ u8 sta_index;
+
+ /* BSSID of BSS to which station is associated. Set to 0xFF when
+ * invalid. Retained for backward compalibity with existing HAL
+ * code */
+ u8 bssid_index;
+
+ u8 p2p;
+
+ /* Reserved to align next field on a dword boundary */
+ u8 reserved;
+
+ /* These rates are the intersection of peer and self capabilities. */
+ struct wcn36xx_hal_supported_rates supported_rates;
+} __packed;
+
+struct wcn36xx_hal_config_sta_req_msg_v1 {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_config_sta_params_v1 sta_params;
+} __packed;
+
+struct config_sta_rsp_params {
+ /* success or failure */
+ u32 status;
+
+ /* Station index; valid only when 'status' field value SUCCESS */
+ u8 sta_index;
+
+ /* BSSID Index of BSS to which the station is associated */
+ u8 bssid_index;
+
+ /* DPU Index for PTK */
+ u8 dpu_index;
+
+ /* DPU Index for GTK */
+ u8 bcast_dpu_index;
+
+ /* DPU Index for IGTK */
+ u8 bcast_mgmt_dpu_idx;
+
+ /* PTK DPU signature */
+ u8 uc_ucast_sig;
+
+ /* GTK DPU isignature */
+ u8 uc_bcast_sig;
+
+ /* IGTK DPU signature */
+ u8 uc_mgmt_sig;
+
+ u8 p2p;
+
+} __packed;
+
+struct wcn36xx_hal_config_sta_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ struct config_sta_rsp_params params;
+} __packed;
+
+/* Delete STA Request message */
+struct wcn36xx_hal_delete_sta_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Index of STA to delete */
+ u8 sta_index;
+
+} __packed;
+
+/* Delete STA Response message */
+struct wcn36xx_hal_delete_sta_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ /* Index of STA deleted */
+ u8 sta_id;
+} __packed;
+
+/* 12 Bytes long because this structure can be used to represent rate and
+ * extended rate set IEs. The parser assume this to be at least 12 */
+struct wcn36xx_hal_rate_set {
+ u8 num_rates;
+ u8 rate[WCN36XX_HAL_MAC_RATESET_EID_MAX];
+} __packed;
+
+/* access category record */
+struct wcn36xx_hal_aci_aifsn {
+#ifndef ANI_LITTLE_BIT_ENDIAN
+ u8 rsvd:1;
+ u8 aci:2;
+ u8 acm:1;
+ u8 aifsn:4;
+#else
+ u8 aifsn:4;
+ u8 acm:1;
+ u8 aci:2;
+ u8 rsvd:1;
+#endif
+} __packed;
+
+/* contention window size */
+struct wcn36xx_hal_mac_cw {
+#ifndef ANI_LITTLE_BIT_ENDIAN
+ u8 max:4;
+ u8 min:4;
+#else
+ u8 min:4;
+ u8 max:4;
+#endif
+} __packed;
+
+struct wcn36xx_hal_edca_param_record {
+ struct wcn36xx_hal_aci_aifsn aci;
+ struct wcn36xx_hal_mac_cw cw;
+ u16 txop_limit;
+} __packed;
+
+struct wcn36xx_hal_mac_ssid {
+ u8 length;
+ u8 ssid[32];
+} __packed;
+
+/* Concurrency role. These are generic IDs that identify the various roles
+ * in the software system. */
+enum wcn36xx_hal_con_mode {
+ WCN36XX_HAL_STA_MODE = 0,
+
+ /* to support softAp mode . This is misleading.
+ It means AP MODE only. */
+ WCN36XX_HAL_STA_SAP_MODE = 1,
+
+ WCN36XX_HAL_P2P_CLIENT_MODE,
+ WCN36XX_HAL_P2P_GO_MODE,
+ WCN36XX_HAL_MONITOR_MODE,
+};
+
+/* This is a bit pattern to be set for each mode
+ * bit 0 - sta mode
+ * bit 1 - ap mode
+ * bit 2 - p2p client mode
+ * bit 3 - p2p go mode */
+enum wcn36xx_hal_concurrency_mode {
+ HAL_STA = 1,
+ HAL_SAP = 2,
+
+ /* to support sta, softAp mode . This means STA+AP mode */
+ HAL_STA_SAP = 3,
+
+ HAL_P2P_CLIENT = 4,
+ HAL_P2P_GO = 8,
+ HAL_MAX_CONCURRENCY_PERSONA = 4
+};
+
+struct wcn36xx_hal_config_bss_params {
+ /* BSSID */
+ u8 bssid[ETH_ALEN];
+
+ /* Self Mac Address */
+ u8 self_mac_addr[ETH_ALEN];
+
+ /* BSS type */
+ enum wcn36xx_hal_bss_type bss_type;
+
+ /* Operational Mode: AP =0, STA = 1 */
+ u8 oper_mode;
+
+ /* Network Type */
+ enum wcn36xx_hal_nw_type nw_type;
+
+ /* Used to classify PURE_11G/11G_MIXED to program MTU */
+ u8 short_slot_time_supported;
+
+ /* Co-exist with 11a STA */
+ u8 lla_coexist;
+
+ /* Co-exist with 11b STA */
+ u8 llb_coexist;
+
+ /* Co-exist with 11g STA */
+ u8 llg_coexist;
+
+ /* Coexistence with 11n STA */
+ u8 ht20_coexist;
+
+ /* Non GF coexist flag */
+ u8 lln_non_gf_coexist;
+
+ /* TXOP protection support */
+ u8 lsig_tx_op_protection_full_support;
+
+ /* RIFS mode */
+ u8 rifs_mode;
+
+ /* Beacon Interval in TU */
+ u16 beacon_interval;
+
+ /* DTIM period */
+ u8 dtim_period;
+
+ /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */
+ u8 tx_channel_width_set;
+
+ /* Operating channel */
+ u8 oper_channel;
+
+ /* Extension channel for channel bonding */
+ u8 ext_channel;
+
+ /* Reserved to align next field on a dword boundary */
+ u8 reserved;
+
+ /* TODO move sta to the end for 3680 */
+ /* Context of the station being added in HW
+ * Add a STA entry for "itself" -
+ *
+ * On AP - Add the AP itself in an "STA context"
+ *
+ * On STA - Add the AP to which this STA is joining in an
+ * "STA context"
+ */
+ struct wcn36xx_hal_config_sta_params sta;
+ /* SSID of the BSS */
+ struct wcn36xx_hal_mac_ssid ssid;
+
+ /* HAL should update the existing BSS entry, if this flag is set.
+ * UMAC will set this flag in case of reassoc, where we want to
+ * resue the the old BSSID and still return success 0 = Add, 1 =
+ * Update */
+ u8 action;
+
+ /* MAC Rate Set */
+ struct wcn36xx_hal_rate_set rateset;
+
+ /* Enable/Disable HT capabilities of the BSS */
+ u8 ht;
+
+ /* Enable/Disable OBSS protection */
+ u8 obss_prot_enabled;
+
+ /* RMF enabled/disabled */
+ u8 rmf;
+
+ /* HT Operating Mode operating mode of the 802.11n STA */
+ enum wcn36xx_hal_ht_operating_mode ht_oper_mode;
+
+ /* Dual CTS Protection: 0 - Unused, 1 - Used */
+ u8 dual_cts_protection;
+
+ /* Probe Response Max retries */
+ u8 max_probe_resp_retry_limit;
+
+ /* To Enable Hidden ssid */
+ u8 hidden_ssid;
+
+ /* To Enable Disable FW Proxy Probe Resp */
+ u8 proxy_probe_resp;
+
+ /* Boolean to indicate if EDCA params are valid. UMAC might not
+ * have valid EDCA params or might not desire to apply EDCA params
+ * during config BSS. 0 implies Not Valid ; Non-Zero implies
+ * valid */
+ u8 edca_params_valid;
+
+ /* EDCA Parameters for Best Effort Access Category */
+ struct wcn36xx_hal_edca_param_record acbe;
+
+ /* EDCA Parameters forBackground Access Category */
+ struct wcn36xx_hal_edca_param_record acbk;
+
+ /* EDCA Parameters for Video Access Category */
+ struct wcn36xx_hal_edca_param_record acvi;
+
+ /* EDCA Parameters for Voice Access Category */
+ struct wcn36xx_hal_edca_param_record acvo;
+
+ /* Ext Bss Config Msg if set */
+ u8 ext_set_sta_key_param_valid;
+
+ /* SetStaKeyParams for ext bss msg */
+ struct wcn36xx_hal_set_sta_key_params ext_set_sta_key_param;
+
+ /* Persona for the BSS can be STA,AP,GO,CLIENT value same as enum
+ * wcn36xx_hal_con_mode */
+ u8 wcn36xx_hal_persona;
+
+ u8 spectrum_mgt_enable;
+
+ /* HAL fills in the tx power used for mgmt frames in txMgmtPower */
+ s8 tx_mgmt_power;
+
+ /* maxTxPower has max power to be used after applying the power
+ * constraint if any */
+ s8 max_tx_power;
+} __packed;
+
+struct wcn36xx_hal_config_bss_req_msg {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_config_bss_params bss_params;
+} __packed;
+
+struct wcn36xx_hal_config_bss_params_v1 {
+ /* BSSID */
+ u8 bssid[ETH_ALEN];
+
+ /* Self Mac Address */
+ u8 self_mac_addr[ETH_ALEN];
+
+ /* BSS type */
+ enum wcn36xx_hal_bss_type bss_type;
+
+ /* Operational Mode: AP =0, STA = 1 */
+ u8 oper_mode;
+
+ /* Network Type */
+ enum wcn36xx_hal_nw_type nw_type;
+
+ /* Used to classify PURE_11G/11G_MIXED to program MTU */
+ u8 short_slot_time_supported;
+
+ /* Co-exist with 11a STA */
+ u8 lla_coexist;
+
+ /* Co-exist with 11b STA */
+ u8 llb_coexist;
+
+ /* Co-exist with 11g STA */
+ u8 llg_coexist;
+
+ /* Coexistence with 11n STA */
+ u8 ht20_coexist;
+
+ /* Non GF coexist flag */
+ u8 lln_non_gf_coexist;
+
+ /* TXOP protection support */
+ u8 lsig_tx_op_protection_full_support;
+
+ /* RIFS mode */
+ u8 rifs_mode;
+
+ /* Beacon Interval in TU */
+ u16 beacon_interval;
+
+ /* DTIM period */
+ u8 dtim_period;
+
+ /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */
+ u8 tx_channel_width_set;
+
+ /* Operating channel */
+ u8 oper_channel;
+
+ /* Extension channel for channel bonding */
+ u8 ext_channel;
+
+ /* Reserved to align next field on a dword boundary */
+ u8 reserved;
+
+ /* SSID of the BSS */
+ struct wcn36xx_hal_mac_ssid ssid;
+
+ /* HAL should update the existing BSS entry, if this flag is set.
+ * UMAC will set this flag in case of reassoc, where we want to
+ * resue the the old BSSID and still return success 0 = Add, 1 =
+ * Update */
+ u8 action;
+
+ /* MAC Rate Set */
+ struct wcn36xx_hal_rate_set rateset;
+
+ /* Enable/Disable HT capabilities of the BSS */
+ u8 ht;
+
+ /* Enable/Disable OBSS protection */
+ u8 obss_prot_enabled;
+
+ /* RMF enabled/disabled */
+ u8 rmf;
+
+ /* HT Operating Mode operating mode of the 802.11n STA */
+ enum wcn36xx_hal_ht_operating_mode ht_oper_mode;
+
+ /* Dual CTS Protection: 0 - Unused, 1 - Used */
+ u8 dual_cts_protection;
+
+ /* Probe Response Max retries */
+ u8 max_probe_resp_retry_limit;
+
+ /* To Enable Hidden ssid */
+ u8 hidden_ssid;
+
+ /* To Enable Disable FW Proxy Probe Resp */
+ u8 proxy_probe_resp;
+
+ /* Boolean to indicate if EDCA params are valid. UMAC might not
+ * have valid EDCA params or might not desire to apply EDCA params
+ * during config BSS. 0 implies Not Valid ; Non-Zero implies
+ * valid */
+ u8 edca_params_valid;
+
+ /* EDCA Parameters for Best Effort Access Category */
+ struct wcn36xx_hal_edca_param_record acbe;
+
+ /* EDCA Parameters forBackground Access Category */
+ struct wcn36xx_hal_edca_param_record acbk;
+
+ /* EDCA Parameters for Video Access Category */
+ struct wcn36xx_hal_edca_param_record acvi;
+
+ /* EDCA Parameters for Voice Access Category */
+ struct wcn36xx_hal_edca_param_record acvo;
+
+ /* Ext Bss Config Msg if set */
+ u8 ext_set_sta_key_param_valid;
+
+ /* SetStaKeyParams for ext bss msg */
+ struct wcn36xx_hal_set_sta_key_params ext_set_sta_key_param;
+
+ /* Persona for the BSS can be STA,AP,GO,CLIENT value same as enum
+ * wcn36xx_hal_con_mode */
+ u8 wcn36xx_hal_persona;
+
+ u8 spectrum_mgt_enable;
+
+ /* HAL fills in the tx power used for mgmt frames in txMgmtPower */
+ s8 tx_mgmt_power;
+
+ /* maxTxPower has max power to be used after applying the power
+ * constraint if any */
+ s8 max_tx_power;
+
+ /* Context of the station being added in HW
+ * Add a STA entry for "itself" -
+ *
+ * On AP - Add the AP itself in an "STA context"
+ *
+ * On STA - Add the AP to which this STA is joining in an
+ * "STA context"
+ */
+ struct wcn36xx_hal_config_sta_params_v1 sta;
+} __packed;
+
+struct wcn36xx_hal_config_bss_req_msg_v1 {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_config_bss_params_v1 bss_params;
+} __packed;
+
+struct wcn36xx_hal_config_bss_rsp_params {
+ /* Success or Failure */
+ u32 status;
+
+ /* BSS index allocated by HAL */
+ u8 bss_index;
+
+ /* DPU descriptor index for PTK */
+ u8 dpu_desc_index;
+
+ /* PTK DPU signature */
+ u8 ucast_dpu_signature;
+
+ /* DPU descriptor index for GTK */
+ u8 bcast_dpu_desc_indx;
+
+ /* GTK DPU signature */
+ u8 bcast_dpu_signature;
+
+ /* DPU descriptor for IGTK */
+ u8 mgmt_dpu_desc_index;
+
+ /* IGTK DPU signature */
+ u8 mgmt_dpu_signature;
+
+ /* Station Index for BSS entry */
+ u8 bss_sta_index;
+
+ /* Self station index for this BSS */
+ u8 bss_self_sta_index;
+
+ /* Bcast station for buffering bcast frames in AP role */
+ u8 bss_bcast_sta_idx;
+
+ /* MAC Address of STA(PEER/SELF) in staContext of configBSSReq */
+ u8 mac[ETH_ALEN];
+
+ /* HAL fills in the tx power used for mgmt frames in this field. */
+ s8 tx_mgmt_power;
+
+} __packed;
+
+struct wcn36xx_hal_config_bss_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_config_bss_rsp_params bss_rsp_params;
+} __packed;
+
+struct wcn36xx_hal_delete_bss_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* BSS index to be deleted */
+ u8 bss_index;
+
+} __packed;
+
+struct wcn36xx_hal_delete_bss_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Success or Failure */
+ u32 status;
+
+ /* BSS index that has been deleted */
+ u8 bss_index;
+
+} __packed;
+
+struct wcn36xx_hal_join_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Indicates the BSSID to which STA is going to associate */
+ u8 bssid[ETH_ALEN];
+
+ /* Indicates the channel to switch to. */
+ u8 channel;
+
+ /* Self STA MAC */
+ u8 self_sta_mac_addr[ETH_ALEN];
+
+ /* Local power constraint */
+ u8 local_power_constraint;
+
+ /* Secondary channel offset */
+ enum phy_chan_bond_state secondary_channel_offset;
+
+ /* link State */
+ enum wcn36xx_hal_link_state link_state;
+
+ /* Max TX power */
+ s8 max_tx_power;
+} __packed;
+
+struct wcn36xx_hal_join_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ /* HAL fills in the tx power used for mgmt frames in this field */
+ u8 tx_mgmt_power;
+} __packed;
+
+struct post_assoc_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ struct wcn36xx_hal_config_sta_params sta_params;
+ struct wcn36xx_hal_config_bss_params bss_params;
+};
+
+struct post_assoc_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+ struct config_sta_rsp_params sta_rsp_params;
+ struct wcn36xx_hal_config_bss_rsp_params bss_rsp_params;
+};
+
+/* This is used to create a set of WEP keys for a given BSS. */
+struct wcn36xx_hal_set_bss_key_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* BSS Index of the BSS */
+ u8 bss_idx;
+
+ /* Encryption Type used with peer */
+ enum ani_ed_type enc_type;
+
+ /* Number of keys */
+ u8 num_keys;
+
+ /* Array of keys. */
+ struct wcn36xx_hal_keys keys[WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS];
+
+ /* Control for Replay Count, 1= Single TID based replay count on Tx
+ * 0 = Per TID based replay count on TX */
+ u8 single_tid_rc;
+} __packed;
+
+/* tagged version of set bss key */
+struct wcn36xx_hal_set_bss_key_req_msg_tagged {
+ struct wcn36xx_hal_set_bss_key_req_msg Msg;
+ u32 tag;
+} __packed;
+
+struct wcn36xx_hal_set_bss_key_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+} __packed;
+
+/*
+ * This is used configure the key information on a given station.
+ * When the sec_type is WEP40 or WEP104, the def_wep_idx is used to locate
+ * a preconfigured key from a BSS the station assoicated with; otherwise
+ * a new key descriptor is created based on the key field.
+ */
+struct wcn36xx_hal_set_sta_key_req_msg {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_set_sta_key_params set_sta_key_params;
+} __packed;
+
+struct wcn36xx_hal_set_sta_key_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+} __packed;
+
+struct wcn36xx_hal_remove_bss_key_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* BSS Index of the BSS */
+ u8 bss_idx;
+
+ /* Encryption Type used with peer */
+ enum ani_ed_type enc_type;
+
+ /* Key Id */
+ u8 key_id;
+
+ /* STATIC/DYNAMIC. Used in Nullifying in Key Descriptors for
+ * Static/Dynamic keys */
+ enum ani_wep_type wep_type;
+} __packed;
+
+struct wcn36xx_hal_remove_bss_key_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+} __packed;
+
+/*
+ * This is used by PE to Remove the key information on a given station.
+ */
+struct wcn36xx_hal_remove_sta_key_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* STA Index */
+ u16 sta_idx;
+
+ /* Encryption Type used with peer */
+ enum ani_ed_type enc_type;
+
+ /* Key Id */
+ u8 key_id;
+
+ /* Whether to invalidate the Broadcast key or Unicast key. In case
+ * of WEP, the same key is used for both broadcast and unicast. */
+ u8 unicast;
+
+} __packed;
+
+struct wcn36xx_hal_remove_sta_key_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /*success or failure */
+ u32 status;
+
+} __packed;
+
+#ifdef FEATURE_OEM_DATA_SUPPORT
+
+#ifndef OEM_DATA_REQ_SIZE
+#define OEM_DATA_REQ_SIZE 134
+#endif
+
+#ifndef OEM_DATA_RSP_SIZE
+#define OEM_DATA_RSP_SIZE 1968
+#endif
+
+struct start_oem_data_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u32 status;
+ tSirMacAddr self_mac_addr;
+ u8 oem_data_req[OEM_DATA_REQ_SIZE];
+
+};
+
+struct start_oem_data_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 oem_data_rsp[OEM_DATA_RSP_SIZE];
+};
+
+#endif
+
+struct wcn36xx_hal_switch_channel_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Channel number */
+ u8 channel_number;
+
+ /* Local power constraint */
+ u8 local_power_constraint;
+
+ /* Secondary channel offset */
+ enum phy_chan_bond_state secondary_channel_offset;
+
+ /* HAL fills in the tx power used for mgmt frames in this field. */
+ u8 tx_mgmt_power;
+
+ /* Max TX power */
+ u8 max_tx_power;
+
+ /* Self STA MAC */
+ u8 self_sta_mac_addr[ETH_ALEN];
+
+ /* VO WIFI comment: BSSID needed to identify session. As the
+ * request has power constraints, this should be applied only to
+ * that session Since MTU timing and EDCA are sessionized, this
+ * struct needs to be sessionized and bssid needs to be out of the
+ * VOWifi feature flag V IMP: Keep bssId field at the end of this
+ * msg. It is used to mantain backward compatbility by way of
+ * ignoring if using new host/old FW or old host/new FW since it is
+ * at the end of this struct
+ */
+ u8 bssid[ETH_ALEN];
+} __packed;
+
+struct wcn36xx_hal_switch_channel_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Status */
+ u32 status;
+
+ /* Channel number - same as in request */
+ u8 channel_number;
+
+ /* HAL fills in the tx power used for mgmt frames in this field */
+ u8 tx_mgmt_power;
+
+ /* BSSID needed to identify session - same as in request */
+ u8 bssid[ETH_ALEN];
+
+} __packed;
+
+struct update_edca_params_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /*BSS Index */
+ u16 bss_index;
+
+ /* Best Effort */
+ struct wcn36xx_hal_edca_param_record acbe;
+
+ /* Background */
+ struct wcn36xx_hal_edca_param_record acbk;
+
+ /* Video */
+ struct wcn36xx_hal_edca_param_record acvi;
+
+ /* Voice */
+ struct wcn36xx_hal_edca_param_record acvo;
+};
+
+struct update_edca_params_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct dpu_stats_params {
+ /* Index of STA to which the statistics */
+ u16 sta_index;
+
+ /* Encryption mode */
+ u8 enc_mode;
+
+ /* status */
+ u32 status;
+
+ /* Statistics */
+ u32 send_blocks;
+ u32 recv_blocks;
+ u32 replays;
+ u8 mic_error_cnt;
+ u32 prot_excl_cnt;
+ u16 format_err_cnt;
+ u16 un_decryptable_cnt;
+ u32 decrypt_err_cnt;
+ u32 decrypt_ok_cnt;
+};
+
+struct wcn36xx_hal_stats_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Valid STA Idx for per STA stats request */
+ u32 sta_id;
+
+ /* Categories of stats requested as specified in eHalStatsMask */
+ u32 stats_mask;
+};
+
+struct ani_summary_stats_info {
+ /* Total number of packets(per AC) that were successfully
+ * transmitted with retries */
+ u32 retry_cnt[4];
+
+ /* The number of MSDU packets and MMPDU frames per AC that the
+ * 802.11 station successfully transmitted after more than one
+ * retransmission attempt */
+ u32 multiple_retry_cnt[4];
+
+ /* Total number of packets(per AC) that were successfully
+ * transmitted (with and without retries, including multi-cast,
+ * broadcast) */
+ u32 tx_frm_cnt[4];
+
+ /* Total number of packets that were successfully received (after
+ * appropriate filter rules including multi-cast, broadcast) */
+ u32 rx_frm_cnt;
+
+ /* Total number of duplicate frames received successfully */
+ u32 frm_dup_cnt;
+
+ /* Total number packets(per AC) failed to transmit */
+ u32 fail_cnt[4];
+
+ /* Total number of RTS/CTS sequence failures for transmission of a
+ * packet */
+ u32 rts_fail_cnt;
+
+ /* Total number packets failed transmit because of no ACK from the
+ * remote entity */
+ u32 ack_fail_cnt;
+
+ /* Total number of RTS/CTS sequence success for transmission of a
+ * packet */
+ u32 rts_succ_cnt;
+
+ /* The sum of the receive error count and dropped-receive-buffer
+ * error count. HAL will provide this as a sum of (FCS error) +
+ * (Fail get BD/PDU in HW) */
+ u32 rx_discard_cnt;
+
+ /*
+ * The receive error count. HAL will provide the RxP FCS error
+ * global counter. */
+ u32 rx_error_cnt;
+
+ /* The sum of the transmit-directed byte count, transmit-multicast
+ * byte count and transmit-broadcast byte count. HAL will sum TPE
+ * UC/MC/BCAST global counters to provide this. */
+ u32 tx_byte_cnt;
+};
+
+/* defines tx_rate_flags */
+enum tx_rate_info {
+ /* Legacy rates */
+ HAL_TX_RATE_LEGACY = 0x1,
+
+ /* HT20 rates */
+ HAL_TX_RATE_HT20 = 0x2,
+
+ /* HT40 rates */
+ HAL_TX_RATE_HT40 = 0x4,
+
+ /* Rate with Short guard interval */
+ HAL_TX_RATE_SGI = 0x8,
+
+ /* Rate with Long guard interval */
+ HAL_TX_RATE_LGI = 0x10
+};
+
+struct ani_global_class_a_stats_info {
+ /* The number of MPDU frames received by the 802.11 station for
+ * MSDU packets or MMPDU frames */
+ u32 rx_frag_cnt;
+
+ /* The number of MPDU frames received by the 802.11 station for
+ * MSDU packets or MMPDU frames when a promiscuous packet filter
+ * was enabled */
+ u32 promiscuous_rx_frag_cnt;
+
+ /* The receiver input sensitivity referenced to a FER of 8% at an
+ * MPDU length of 1024 bytes at the antenna connector. Each element
+ * of the array shall correspond to a supported rate and the order
+ * shall be the same as the supporteRates parameter. */
+ u32 rx_input_sensitivity;
+
+ /* The maximum transmit power in dBm upto one decimal. for eg: if
+ * it is 10.5dBm, the value would be 105 */
+ u32 max_pwr;
+
+ /* Number of times the receiver failed to synchronize with the
+ * incoming signal after detecting the sync in the preamble of the
+ * transmitted PLCP protocol data unit. */
+ u32 sync_fail_cnt;
+
+ /* Legacy transmit rate, in units of 500 kbit/sec, for the most
+ * recently transmitted frame */
+ u32 tx_rate;
+
+ /* mcs index for HT20 and HT40 rates */
+ u32 mcs_index;
+
+ /* to differentiate between HT20 and HT40 rates; short and long
+ * guard interval */
+ u32 tx_rate_flags;
+};
+
+struct ani_global_security_stats {
+ /* The number of unencrypted received MPDU frames that the MAC
+ * layer discarded when the IEEE 802.11 dot11ExcludeUnencrypted
+ * management information base (MIB) object is enabled */
+ u32 rx_wep_unencrypted_frm_cnt;
+
+ /* The number of received MSDU packets that that the 802.11 station
+ * discarded because of MIC failures */
+ u32 rx_mic_fail_cnt;
+
+ /* The number of encrypted MPDU frames that the 802.11 station
+ * failed to decrypt because of a TKIP ICV error */
+ u32 tkip_icv_err;
+
+ /* The number of received MPDU frames that the 802.11 discarded
+ * because of an invalid AES-CCMP format */
+ u32 aes_ccmp_format_err;
+
+ /* The number of received MPDU frames that the 802.11 station
+ * discarded because of the AES-CCMP replay protection procedure */
+ u32 aes_ccmp_replay_cnt;
+
+ /* The number of received MPDU frames that the 802.11 station
+ * discarded because of errors detected by the AES-CCMP decryption
+ * algorithm */
+ u32 aes_ccmp_decrpt_err;
+
+ /* The number of encrypted MPDU frames received for which a WEP
+ * decryption key was not available on the 802.11 station */
+ u32 wep_undecryptable_cnt;
+
+ /* The number of encrypted MPDU frames that the 802.11 station
+ * failed to decrypt because of a WEP ICV error */
+ u32 wep_icv_err;
+
+ /* The number of received encrypted packets that the 802.11 station
+ * successfully decrypted */
+ u32 rx_decrypt_succ_cnt;
+
+ /* The number of encrypted packets that the 802.11 station failed
+ * to decrypt */
+ u32 rx_decrypt_fail_cnt;
+};
+
+struct ani_global_class_b_stats_info {
+ struct ani_global_security_stats uc_stats;
+ struct ani_global_security_stats mc_bc_stats;
+};
+
+struct ani_global_class_c_stats_info {
+ /* This counter shall be incremented for a received A-MSDU frame
+ * with the stations MAC address in the address 1 field or an
+ * A-MSDU frame with a group address in the address 1 field */
+ u32 rx_amsdu_cnt;
+
+ /* This counter shall be incremented when the MAC receives an AMPDU
+ * from the PHY */
+ u32 rx_ampdu_cnt;
+
+ /* This counter shall be incremented when a Frame is transmitted
+ * only on the primary channel */
+ u32 tx_20_frm_cnt;
+
+ /* This counter shall be incremented when a Frame is received only
+ * on the primary channel */
+ u32 rx_20_frm_cnt;
+
+ /* This counter shall be incremented by the number of MPDUs
+ * received in the A-MPDU when an A-MPDU is received */
+ u32 rx_mpdu_in_ampdu_cnt;
+
+ /* This counter shall be incremented when an MPDU delimiter has a
+ * CRC error when this is the first CRC error in the received AMPDU
+ * or when the previous delimiter has been decoded correctly */
+ u32 ampdu_delimiter_crc_err;
+};
+
+struct ani_per_sta_stats_info {
+ /* The number of MPDU frames that the 802.11 station transmitted
+ * and acknowledged through a received 802.11 ACK frame */
+ u32 tx_frag_cnt[4];
+
+ /* This counter shall be incremented when an A-MPDU is transmitted */
+ u32 tx_ampdu_cnt;
+
+ /* This counter shall increment by the number of MPDUs in the AMPDU
+ * when an A-MPDU is transmitted */
+ u32 tx_mpdu_in_ampdu_cnt;
+};
+
+struct wcn36xx_hal_stats_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Success or Failure */
+ u32 status;
+
+ /* STA Idx */
+ u32 sta_index;
+
+ /* Categories of STATS being returned as per eHalStatsMask */
+ u32 stats_mask;
+
+ /* message type is same as the request type */
+ u16 msg_type;
+
+ /* length of the entire request, includes the pStatsBuf length too */
+ u16 msg_len;
+};
+
+struct wcn36xx_hal_set_link_state_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 bssid[ETH_ALEN];
+ enum wcn36xx_hal_link_state state;
+ u8 self_mac_addr[ETH_ALEN];
+
+} __packed;
+
+struct set_link_state_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+/* TSPEC Params */
+struct wcn36xx_hal_ts_info_tfc {
+#ifndef ANI_LITTLE_BIT_ENDIAN
+ u16 ackPolicy:2;
+ u16 userPrio:3;
+ u16 psb:1;
+ u16 aggregation:1;
+ u16 accessPolicy:2;
+ u16 direction:2;
+ u16 tsid:4;
+ u16 trafficType:1;
+#else
+ u16 trafficType:1;
+ u16 tsid:4;
+ u16 direction:2;
+ u16 accessPolicy:2;
+ u16 aggregation:1;
+ u16 psb:1;
+ u16 userPrio:3;
+ u16 ackPolicy:2;
+#endif
+};
+
+/* Flag to schedule the traffic type */
+struct wcn36xx_hal_ts_info_sch {
+#ifndef ANI_LITTLE_BIT_ENDIAN
+ u8 rsvd:7;
+ u8 schedule:1;
+#else
+ u8 schedule:1;
+ u8 rsvd:7;
+#endif
+};
+
+/* Traffic and scheduling info */
+struct wcn36xx_hal_ts_info {
+ struct wcn36xx_hal_ts_info_tfc traffic;
+ struct wcn36xx_hal_ts_info_sch schedule;
+};
+
+/* Information elements */
+struct wcn36xx_hal_tspec_ie {
+ u8 type;
+ u8 length;
+ struct wcn36xx_hal_ts_info ts_info;
+ u16 nom_msdu_size;
+ u16 max_msdu_size;
+ u32 min_svc_interval;
+ u32 max_svc_interval;
+ u32 inact_interval;
+ u32 suspend_interval;
+ u32 svc_start_time;
+ u32 min_data_rate;
+ u32 mean_data_rate;
+ u32 peak_data_rate;
+ u32 max_burst_sz;
+ u32 delay_bound;
+ u32 min_phy_rate;
+ u16 surplus_bw;
+ u16 medium_time;
+};
+
+struct add_ts_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Station Index */
+ u16 sta_index;
+
+ /* TSPEC handler uniquely identifying a TSPEC for a STA in a BSS */
+ u16 tspec_index;
+
+ /* To program TPE with required parameters */
+ struct wcn36xx_hal_tspec_ie tspec;
+
+ /* U-APSD Flags: 1b per AC. Encoded as follows:
+ b7 b6 b5 b4 b3 b2 b1 b0 =
+ X X X X BE BK VI VO */
+ u8 uapsd;
+
+ /* These parameters are for all the access categories */
+
+ /* Service Interval */
+ u32 service_interval[WCN36XX_HAL_MAX_AC];
+
+ /* Suspend Interval */
+ u32 suspend_interval[WCN36XX_HAL_MAX_AC];
+
+ /* Delay Interval */
+ u32 delay_interval[WCN36XX_HAL_MAX_AC];
+};
+
+struct add_rs_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct del_ts_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Station Index */
+ u16 sta_index;
+
+ /* TSPEC identifier uniquely identifying a TSPEC for a STA in a BSS */
+ u16 tspec_index;
+
+ /* To lookup station id using the mac address */
+ u8 bssid[ETH_ALEN];
+};
+
+struct del_ts_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+/* End of TSpec Parameters */
+
+/* Start of BLOCK ACK related Parameters */
+
+struct wcn36xx_hal_add_ba_session_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Station Index */
+ u16 sta_index;
+
+ /* Peer MAC Address */
+ u8 mac_addr[ETH_ALEN];
+
+ /* ADDBA Action Frame dialog token
+ HAL will not interpret this object */
+ u8 dialog_token;
+
+ /* TID for which the BA is being setup
+ This identifies the TC or TS of interest */
+ u8 tid;
+
+ /* 0 - Delayed BA (Not supported)
+ 1 - Immediate BA */
+ u8 policy;
+
+ /* Indicates the number of buffers for this TID (baTID)
+ NOTE - This is the requested buffer size. When this
+ is processed by HAL and subsequently by HDD, it is
+ possible that HDD may change this buffer size. Any
+ change in the buffer size should be noted by PE and
+ advertized appropriately in the ADDBA response */
+ u16 buffer_size;
+
+ /* BA timeout in TU's 0 means no timeout will occur */
+ u16 timeout;
+
+ /* b0..b3 - Fragment Number - Always set to 0
+ b4..b15 - Starting Sequence Number of first MSDU
+ for which this BA is setup */
+ u16 ssn;
+
+ /* ADDBA direction
+ 1 - Originator
+ 0 - Recipient */
+ u8 direction;
+} __packed;
+
+struct wcn36xx_hal_add_ba_session_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ /* Dialog token */
+ u8 dialog_token;
+
+ /* TID for which the BA session has been setup */
+ u8 ba_tid;
+
+ /* BA Buffer Size allocated for the current BA session */
+ u8 ba_buffer_size;
+
+ u8 ba_session_id;
+
+ /* Reordering Window buffer */
+ u8 win_size;
+
+ /* Station Index to id the sta */
+ u8 sta_index;
+
+ /* Starting Sequence Number */
+ u16 ssn;
+} __packed;
+
+struct wcn36xx_hal_add_ba_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Session Id */
+ u8 session_id;
+
+ /* Reorder Window Size */
+ u8 win_size;
+/* Old FW 1.2.2.4 does not support this*/
+#ifdef FEATURE_ON_CHIP_REORDERING
+ u8 reordering_done_on_chip;
+#endif
+} __packed;
+
+struct wcn36xx_hal_add_ba_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ /* Dialog token */
+ u8 dialog_token;
+} __packed;
+
+struct add_ba_info {
+ u16 ba_enable:1;
+ u16 starting_seq_num:12;
+ u16 reserved:3;
+};
+
+struct wcn36xx_hal_trigger_ba_rsp_candidate {
+ u8 sta_addr[ETH_ALEN];
+ struct add_ba_info ba_info[STACFG_MAX_TC];
+} __packed;
+
+struct wcn36xx_hal_trigget_ba_req_candidate {
+ u8 sta_index;
+ u8 tid_bitmap;
+} __packed;
+
+struct wcn36xx_hal_trigger_ba_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Session Id */
+ u8 session_id;
+
+ /* baCandidateCnt is followed by trigger BA
+ * Candidate List(tTriggerBaCandidate)
+ */
+ u16 candidate_cnt;
+
+} __packed;
+
+struct wcn36xx_hal_trigger_ba_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* TO SUPPORT BT-AMP */
+ u8 bssid[ETH_ALEN];
+
+ /* success or failure */
+ u32 status;
+
+ /* baCandidateCnt is followed by trigger BA
+ * Rsp Candidate List(tTriggerRspBaCandidate)
+ */
+ u16 candidate_cnt;
+} __packed;
+
+struct wcn36xx_hal_del_ba_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Station Index */
+ u16 sta_index;
+
+ /* TID for which the BA session is being deleted */
+ u8 tid;
+
+ /* DELBA direction
+ 1 - Originator
+ 0 - Recipient */
+ u8 direction;
+} __packed;
+
+struct wcn36xx_hal_del_ba_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+} __packed;
+
+struct tsm_stats_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Traffic Id */
+ u8 tid;
+
+ u8 bssid[ETH_ALEN];
+};
+
+struct tsm_stats_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /*success or failure */
+ u32 status;
+
+ /* Uplink Packet Queue delay */
+ u16 uplink_pkt_queue_delay;
+
+ /* Uplink Packet Queue delay histogram */
+ u16 uplink_pkt_queue_delay_hist[4];
+
+ /* Uplink Packet Transmit delay */
+ u32 uplink_pkt_tx_delay;
+
+ /* Uplink Packet loss */
+ u16 uplink_pkt_loss;
+
+ /* Uplink Packet count */
+ u16 uplink_pkt_count;
+
+ /* Roaming count */
+ u8 roaming_count;
+
+ /* Roaming Delay */
+ u16 roaming_delay;
+};
+
+struct set_key_done_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /*bssid of the keys */
+ u8 bssidx;
+ u8 enc_type;
+};
+
+struct wcn36xx_hal_nv_img_download_req_msg {
+ /* Note: The length specified in wcn36xx_hal_nv_img_download_req_msg
+ * messages should be
+ * header.len = sizeof(wcn36xx_hal_nv_img_download_req_msg) +
+ * nv_img_buffer_size */
+ struct wcn36xx_hal_msg_header header;
+
+ /* Fragment sequence number of the NV Image. Note that NV Image
+ * might not fit into one message due to size limitation of the SMD
+ * channel FIFO. UMAC can hence choose to chop the NV blob into
+ * multiple fragments starting with seqeunce number 0, 1, 2 etc.
+ * The last fragment MUST be indicated by marking the
+ * isLastFragment field to 1. Note that all the NV blobs would be
+ * concatenated together by HAL without any padding bytes in
+ * between.*/
+ u16 frag_number;
+
+ /* Is this the last fragment? When set to 1 it indicates that no
+ * more fragments will be sent by UMAC and HAL can concatenate all
+ * the NV blobs rcvd & proceed with the parsing. HAL would generate
+ * a WCN36XX_HAL_DOWNLOAD_NV_RSP to the WCN36XX_HAL_DOWNLOAD_NV_REQ
+ * after it receives each fragment */
+ u16 last_fragment;
+
+ /* NV Image size (number of bytes) */
+ u32 nv_img_buffer_size;
+
+ /* Following the 'nv_img_buffer_size', there should be
+ * nv_img_buffer_size bytes of NV Image i.e.
+ * u8[nv_img_buffer_size] */
+} __packed;
+
+struct wcn36xx_hal_nv_img_download_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Success or Failure. HAL would generate a
+ * WCN36XX_HAL_DOWNLOAD_NV_RSP after each fragment */
+ u32 status;
+} __packed;
+
+struct wcn36xx_hal_nv_store_ind {
+ /* Note: The length specified in tHalNvStoreInd messages should be
+ * header.msgLen = sizeof(tHalNvStoreInd) + nvBlobSize */
+ struct wcn36xx_hal_msg_header header;
+
+ /* NV Item */
+ u32 table_id;
+
+ /* Size of NV Blob */
+ u32 nv_blob_size;
+
+ /* Following the 'nvBlobSize', there should be nvBlobSize bytes of
+ * NV blob i.e. u8[nvBlobSize] */
+};
+
+/* End of Block Ack Related Parameters */
+
+#define WCN36XX_HAL_CIPHER_SEQ_CTR_SIZE 6
+
+/* Definition for MIC failure indication MAC reports this each time a MIC
+ * failure occures on Rx TKIP packet
+ */
+struct mic_failure_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 bssid[ETH_ALEN];
+
+ /* address used to compute MIC */
+ u8 src_addr[ETH_ALEN];
+
+ /* transmitter address */
+ u8 ta_addr[ETH_ALEN];
+
+ u8 dst_addr[ETH_ALEN];
+
+ u8 multicast;
+
+ /* first byte of IV */
+ u8 iv1;
+
+ /* second byte of IV */
+ u8 key_id;
+
+ /* sequence number */
+ u8 tsc[WCN36XX_HAL_CIPHER_SEQ_CTR_SIZE];
+
+ /* receive address */
+ u8 rx_addr[ETH_ALEN];
+};
+
+struct update_vht_op_mode_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u16 op_mode;
+ u16 sta_id;
+};
+
+struct update_vht_op_mode_params_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u32 status;
+};
+
+struct update_beacon_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 bss_index;
+
+ /* shortPreamble mode. HAL should update all the STA rates when it
+ * receives this message */
+ u8 short_preamble;
+
+ /* short Slot time. */
+ u8 short_slot_time;
+
+ /* Beacon Interval */
+ u16 beacon_interval;
+
+ /* Protection related */
+ u8 lla_coexist;
+ u8 llb_coexist;
+ u8 llg_coexist;
+ u8 ht20_coexist;
+ u8 lln_non_gf_coexist;
+ u8 lsig_tx_op_protection_full_support;
+ u8 rifs_mode;
+
+ u16 param_change_bitmap;
+};
+
+struct update_beacon_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+ u32 status;
+};
+
+struct wcn36xx_hal_send_beacon_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* length of the template. */
+ u32 beacon_length;
+
+ /* Beacon data. */
+ u8 beacon[BEACON_TEMPLATE_SIZE];
+
+ u8 bssid[ETH_ALEN];
+
+ /* TIM IE offset from the beginning of the template. */
+ u32 tim_ie_offset;
+
+ /* P2P IE offset from the begining of the template */
+ u16 p2p_ie_offset;
+} __packed;
+
+struct send_beacon_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+ u32 status;
+} __packed;
+
+struct enable_radar_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 bssid[ETH_ALEN];
+ u8 channel;
+};
+
+struct enable_radar_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Link Parameters */
+ u8 bssid[ETH_ALEN];
+
+ /* success or failure */
+ u32 status;
+};
+
+struct radar_detect_intr_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 radar_det_channel;
+};
+
+struct radar_detect_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* channel number in which the RADAR detected */
+ u8 channel_number;
+
+ /* RADAR pulse width in usecond */
+ u16 radar_pulse_width;
+
+ /* Number of RADAR pulses */
+ u16 num_radar_pulse;
+};
+
+struct wcn36xx_hal_get_tpc_report_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 sta[ETH_ALEN];
+ u8 dialog_token;
+ u8 txpower;
+};
+
+struct wcn36xx_hal_get_tpc_report_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_send_probe_resp_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 probe_resp_template[BEACON_TEMPLATE_SIZE];
+ u32 probe_resp_template_len;
+ u32 proxy_probe_req_valid_ie_bmap[8];
+ u8 bssid[ETH_ALEN];
+};
+
+struct send_probe_resp_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct send_unknown_frame_rx_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_delete_sta_context_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u16 aid;
+ u16 sta_id;
+
+ /* TO SUPPORT BT-AMP */
+ u8 bssid[ETH_ALEN];
+
+ /* HAL copies bssid from the sta table. */
+ u8 addr2[ETH_ALEN];
+
+ /* To unify the keepalive / unknown A2 / tim-based disa */
+ u16 reason_code;
+} __packed;
+
+struct indicate_del_sta {
+ struct wcn36xx_hal_msg_header header;
+ u8 aid;
+ u8 sta_index;
+ u8 bss_index;
+ u8 reason_code;
+ u32 status;
+};
+
+struct bt_amp_event_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ enum bt_amp_event_type btAmpEventType;
+};
+
+struct bt_amp_event_rsp {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct tl_hal_flush_ac_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Station Index. originates from HAL */
+ u8 sta_id;
+
+ /* TID for which the transmit queue is being flushed */
+ u8 tid;
+};
+
+struct tl_hal_flush_ac_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Station Index. originates from HAL */
+ u8 sta_id;
+
+ /* TID for which the transmit queue is being flushed */
+ u8 tid;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_enter_imps_req_msg {
+ struct wcn36xx_hal_msg_header header;
+};
+
+struct wcn36xx_hal_exit_imps_req {
+ struct wcn36xx_hal_msg_header header;
+};
+
+struct wcn36xx_hal_enter_bmps_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 bss_index;
+
+ /* TBTT value derived from the last beacon */
+#ifndef BUILD_QWPTTSTATIC
+ u64 tbtt;
+#endif
+ u8 dtim_count;
+
+ /* DTIM period given to HAL during association may not be valid, if
+ * association is based on ProbeRsp instead of beacon. */
+ u8 dtim_period;
+
+ /* For CCX and 11R Roaming */
+ u32 rssi_filter_period;
+
+ u32 num_beacon_per_rssi_average;
+ u8 rssi_filter_enable;
+} __packed;
+
+struct wcn36xx_hal_exit_bmps_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 send_data_null;
+ u8 bss_index;
+} __packed;
+
+struct wcn36xx_hal_missed_beacon_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 bss_index;
+} __packed;
+
+/* Beacon Filtering data structures */
+
+/* The above structure would be followed by multiple of below mentioned
+ * structure
+ */
+struct beacon_filter_ie {
+ u8 element_id;
+ u8 check_ie_presence;
+ u8 offset;
+ u8 value;
+ u8 bitmask;
+ u8 ref;
+};
+
+struct wcn36xx_hal_add_bcn_filter_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u16 capability_info;
+ u16 capability_mask;
+ u16 beacon_interval;
+ u16 ie_num;
+ u8 bss_index;
+ u8 reserved;
+};
+
+struct wcn36xx_hal_rem_bcn_filter_req {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 ie_Count;
+ u8 rem_ie_id[1];
+};
+
+#define WCN36XX_HAL_IPV4_ARP_REPLY_OFFLOAD 0
+#define WCN36XX_HAL_IPV6_NEIGHBOR_DISCOVERY_OFFLOAD 1
+#define WCN36XX_HAL_IPV6_NS_OFFLOAD 2
+#define WCN36XX_HAL_IPV6_ADDR_LEN 16
+#define WCN36XX_HAL_OFFLOAD_DISABLE 0
+#define WCN36XX_HAL_OFFLOAD_ENABLE 1
+#define WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE 0x2
+#define WCN36XX_HAL_OFFLOAD_ARP_AND_BCAST_FILTER_ENABLE \
+ (HAL_OFFLOAD_ENABLE|HAL_OFFLOAD_BCAST_FILTER_ENABLE)
+
+struct wcn36xx_hal_ns_offload_params {
+ u8 src_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN];
+ u8 self_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN];
+
+ /* Only support 2 possible Network Advertisement IPv6 address */
+ u8 target_ipv6_addr1[WCN36XX_HAL_IPV6_ADDR_LEN];
+ u8 target_ipv6_addr2[WCN36XX_HAL_IPV6_ADDR_LEN];
+
+ u8 self_addr[ETH_ALEN];
+ u8 src_ipv6_addr_valid:1;
+ u8 target_ipv6_addr1_valid:1;
+ u8 target_ipv6_addr2_valid:1;
+ u8 reserved1:5;
+
+ /* make it DWORD aligned */
+ u8 reserved2;
+
+ /* slot index for this offload */
+ u32 slot_index;
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_host_offload_req {
+ u8 offload_Type;
+
+ /* enable or disable */
+ u8 enable;
+
+ union {
+ u8 host_ipv4_addr[4];
+ u8 host_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN];
+ } u;
+};
+
+struct wcn36xx_hal_host_offload_req_msg {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_host_offload_req host_offload_params;
+ struct wcn36xx_hal_ns_offload_params ns_offload_params;
+};
+
+/* Packet Types. */
+#define WCN36XX_HAL_KEEP_ALIVE_NULL_PKT 1
+#define WCN36XX_HAL_KEEP_ALIVE_UNSOLICIT_ARP_RSP 2
+
+/* Enable or disable keep alive */
+#define WCN36XX_HAL_KEEP_ALIVE_DISABLE 0
+#define WCN36XX_HAL_KEEP_ALIVE_ENABLE 1
+#define WCN36XX_KEEP_ALIVE_TIME_PERIOD 30 /* unit: s */
+
+/* Keep Alive request. */
+struct wcn36xx_hal_keep_alive_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 packet_type;
+ u32 time_period;
+ u8 host_ipv4_addr[WCN36XX_HAL_IPV4_ADDR_LEN];
+ u8 dest_ipv4_addr[WCN36XX_HAL_IPV4_ADDR_LEN];
+ u8 dest_addr[ETH_ALEN];
+ u8 bss_index;
+} __packed;
+
+struct wcn36xx_hal_rssi_threshold_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ s8 threshold1:8;
+ s8 threshold2:8;
+ s8 threshold3:8;
+ u8 thres1_pos_notify:1;
+ u8 thres1_neg_notify:1;
+ u8 thres2_pos_notify:1;
+ u8 thres2_neg_notify:1;
+ u8 thres3_pos_notify:1;
+ u8 thres3_neg_notify:1;
+ u8 reserved10:2;
+};
+
+struct wcn36xx_hal_enter_uapsd_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 bk_delivery:1;
+ u8 be_delivery:1;
+ u8 vi_delivery:1;
+ u8 vo_delivery:1;
+ u8 bk_trigger:1;
+ u8 be_trigger:1;
+ u8 vi_trigger:1;
+ u8 vo_trigger:1;
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_exit_uapsd_req_msg {
+ struct wcn36xx_hal_msg_header header;
+ u8 bss_index;
+};
+
+#define WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE 128
+#define WCN36XX_HAL_WOWL_BCAST_MAX_NUM_PATTERNS 16
+
+struct wcn36xx_hal_wowl_add_bcast_ptrn_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Pattern ID */
+ u8 id;
+
+ /* Pattern byte offset from beginning of the 802.11 packet to start
+ * of the wake-up pattern */
+ u8 byte_Offset;
+
+ /* Non-Zero Pattern size */
+ u8 size;
+
+ /* Pattern */
+ u8 pattern[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE];
+
+ /* Non-zero pattern mask size */
+ u8 mask_size;
+
+ /* Pattern mask */
+ u8 mask[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE];
+
+ /* Extra pattern */
+ u8 extra[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE];
+
+ /* Extra pattern mask */
+ u8 mask_extra[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE];
+
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_wow_del_bcast_ptrn_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Pattern ID of the wakeup pattern to be deleted */
+ u8 id;
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_wowl_enter_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Enables/disables magic packet filtering */
+ u8 magic_packet_enable;
+
+ /* Magic pattern */
+ u8 magic_pattern[ETH_ALEN];
+
+ /* Enables/disables packet pattern filtering in firmware. Enabling
+ * this flag enables broadcast pattern matching in Firmware. If
+ * unicast pattern matching is also desired,
+ * ucUcastPatternFilteringEnable flag must be set tot true as well
+ */
+ u8 pattern_filtering_enable;
+
+ /* Enables/disables unicast packet pattern filtering. This flag
+ * specifies whether we want to do pattern match on unicast packets
+ * as well and not just broadcast packets. This flag has no effect
+ * if the ucPatternFilteringEnable (main controlling flag) is set
+ * to false
+ */
+ u8 ucast_pattern_filtering_enable;
+
+ /* This configuration is valid only when magicPktEnable=1. It
+ * requests hardware to wake up when it receives the Channel Switch
+ * Action Frame.
+ */
+ u8 wow_channel_switch_receive;
+
+ /* This configuration is valid only when magicPktEnable=1. It
+ * requests hardware to wake up when it receives the
+ * Deauthentication Frame.
+ */
+ u8 wow_deauth_receive;
+
+ /* This configuration is valid only when magicPktEnable=1. It
+ * requests hardware to wake up when it receives the Disassociation
+ * Frame.
+ */
+ u8 wow_disassoc_receive;
+
+ /* This configuration is valid only when magicPktEnable=1. It
+ * requests hardware to wake up when it has missed consecutive
+ * beacons. This is a hardware register configuration (NOT a
+ * firmware configuration).
+ */
+ u8 wow_max_missed_beacons;
+
+ /* This configuration is valid only when magicPktEnable=1. This is
+ * a timeout value in units of microsec. It requests hardware to
+ * unconditionally wake up after it has stayed in WoWLAN mode for
+ * some time. Set 0 to disable this feature.
+ */
+ u8 wow_max_sleep;
+
+ /* This configuration directs the WoW packet filtering to look for
+ * EAP-ID requests embedded in EAPOL frames and use this as a wake
+ * source.
+ */
+ u8 wow_eap_id_request_enable;
+
+ /* This configuration directs the WoW packet filtering to look for
+ * EAPOL-4WAY requests and use this as a wake source.
+ */
+ u8 wow_eapol_4way_enable;
+
+ /* This configuration allows a host wakeup on an network scan
+ * offload match.
+ */
+ u8 wow_net_scan_offload_match;
+
+ /* This configuration allows a host wakeup on any GTK rekeying
+ * error.
+ */
+ u8 wow_gtk_rekey_error;
+
+ /* This configuration allows a host wakeup on BSS connection loss.
+ */
+ u8 wow_bss_connection_loss;
+
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_wowl_exit_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_get_rssi_req_msg {
+ struct wcn36xx_hal_msg_header header;
+};
+
+struct wcn36xx_hal_get_roam_rssi_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Valid STA Idx for per STA stats request */
+ u32 sta_id;
+};
+
+struct wcn36xx_hal_set_uapsd_ac_params_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* STA index */
+ u8 sta_idx;
+
+ /* Access Category */
+ u8 ac;
+
+ /* User Priority */
+ u8 up;
+
+ /* Service Interval */
+ u32 service_interval;
+
+ /* Suspend Interval */
+ u32 suspend_interval;
+
+ /* Delay Interval */
+ u32 delay_interval;
+};
+
+struct wcn36xx_hal_configure_rxp_filter_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 set_mcst_bcst_filter_setting;
+ u8 set_mcst_bcst_filter;
+};
+
+struct wcn36xx_hal_enter_imps_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_exit_imps_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_enter_bmps_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ u8 bss_index;
+} __packed;
+
+struct wcn36xx_hal_exit_bmps_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ u8 bss_index;
+} __packed;
+
+struct wcn36xx_hal_enter_uapsd_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_exit_uapsd_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_rssi_notification_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u32 rssi_thres1_pos_cross:1;
+ u32 rssi_thres1_neg_cross:1;
+ u32 rssi_thres2_pos_cross:1;
+ u32 rssi_thres2_neg_cross:1;
+ u32 rssi_thres3_pos_cross:1;
+ u32 rssi_thres3_neg_cross:1;
+ u32 avg_rssi:8;
+ u32 reserved:18;
+
+};
+
+struct wcn36xx_hal_get_rssio_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+ s8 rssi;
+
+};
+
+struct wcn36xx_hal_get_roam_rssi_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ u8 sta_id;
+ s8 rssi;
+};
+
+struct wcn36xx_hal_wowl_enter_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_wowl_exit_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_add_bcn_filter_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_rem_bcn_filter_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_add_wowl_bcast_ptrn_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_del_wowl_bcast_ptrn_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_host_offload_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_keep_alive_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_set_rssi_thresh_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_set_uapsd_ac_params_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_configure_rxp_filter_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct set_max_tx_pwr_req {
+ struct wcn36xx_hal_msg_header header;
+
+ /* BSSID is needed to identify which session issued this request.
+ * As the request has power constraints, this should be applied
+ * only to that session */
+ u8 bssid[ETH_ALEN];
+
+ u8 self_addr[ETH_ALEN];
+
+ /* In request, power == MaxTx power to be used. */
+ u8 power;
+};
+
+struct set_max_tx_pwr_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* power == tx power used for management frames */
+ u8 power;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct set_tx_pwr_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* TX Power in milli watts */
+ u32 tx_power;
+
+ u8 bss_index;
+};
+
+struct set_tx_pwr_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct get_tx_pwr_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 sta_id;
+};
+
+struct get_tx_pwr_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ /* TX Power in milli watts */
+ u32 tx_power;
+};
+
+struct set_p2p_gonoa_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 opp_ps;
+ u32 ct_window;
+ u8 count;
+ u32 duration;
+ u32 interval;
+ u32 single_noa_duration;
+ u8 ps_selection;
+};
+
+struct set_p2p_gonoa_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_add_sta_self_req {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 self_addr[ETH_ALEN];
+ u32 status;
+} __packed;
+
+struct wcn36xx_hal_add_sta_self_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ /* Self STA Index */
+ u8 self_sta_index;
+
+ /* DPU Index (IGTK, PTK, GTK all same) */
+ u8 dpu_index;
+
+ /* DPU Signature */
+ u8 dpu_signature;
+} __packed;
+
+struct wcn36xx_hal_del_sta_self_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 self_addr[ETH_ALEN];
+} __packed;
+
+struct wcn36xx_hal_del_sta_self_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /*success or failure */
+ u32 status;
+
+ u8 self_addr[ETH_ALEN];
+} __packed;
+
+struct aggr_add_ts_req {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Station Index */
+ u16 sta_idx;
+
+ /* TSPEC handler uniquely identifying a TSPEC for a STA in a BSS.
+ * This will carry the bitmap with the bit positions representing
+ * different AC.s */
+ u16 tspec_index;
+
+ /* Tspec info per AC To program TPE with required parameters */
+ struct wcn36xx_hal_tspec_ie tspec[WCN36XX_HAL_MAX_AC];
+
+ /* U-APSD Flags: 1b per AC. Encoded as follows:
+ b7 b6 b5 b4 b3 b2 b1 b0 =
+ X X X X BE BK VI VO */
+ u8 uapsd;
+
+ /* These parameters are for all the access categories */
+
+ /* Service Interval */
+ u32 service_interval[WCN36XX_HAL_MAX_AC];
+
+ /* Suspend Interval */
+ u32 suspend_interval[WCN36XX_HAL_MAX_AC];
+
+ /* Delay Interval */
+ u32 delay_interval[WCN36XX_HAL_MAX_AC];
+};
+
+struct aggr_add_ts_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status0;
+
+ /* FIXME PRIMA for future use for 11R */
+ u32 status1;
+};
+
+struct wcn36xx_hal_configure_apps_cpu_wakeup_state_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 is_apps_cpu_awake;
+};
+
+struct wcn36xx_hal_configure_apps_cpu_wakeup_state_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_dump_cmd_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u32 arg1;
+ u32 arg2;
+ u32 arg3;
+ u32 arg4;
+ u32 arg5;
+} __packed;
+
+struct wcn36xx_hal_dump_cmd_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ /* Length of the responce message */
+ u32 rsp_length;
+
+ /* FIXME: Currently considering the the responce will be less than
+ * 100bytes */
+ u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
+} __packed;
+
+#define WLAN_COEX_IND_DATA_SIZE (4)
+#define WLAN_COEX_IND_TYPE_DISABLE_HB_MONITOR (0)
+#define WLAN_COEX_IND_TYPE_ENABLE_HB_MONITOR (1)
+
+struct coex_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Coex Indication Type */
+ u32 type;
+
+ /* Coex Indication Data */
+ u32 data[WLAN_COEX_IND_DATA_SIZE];
+};
+
+struct wcn36xx_hal_tx_compl_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Tx Complete Indication Success or Failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_wlan_host_suspend_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u32 configured_mcst_bcst_filter_setting;
+ u32 active_session_count;
+};
+
+struct wcn36xx_hal_wlan_exclude_unencrpted_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 dot11_exclude_unencrypted;
+ u8 bssid[ETH_ALEN];
+};
+
+struct noa_attr_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 index;
+ u8 opp_ps_flag;
+ u16 ctwin;
+
+ u16 noa1_interval_count;
+ u16 bss_index;
+ u32 noa1_duration;
+ u32 noa1_interval;
+ u32 noa1_starttime;
+
+ u16 noa2_interval_count;
+ u16 reserved2;
+ u32 noa2_duration;
+ u32 noa2_interval;
+ u32 noa2_start_time;
+
+ u32 status;
+};
+
+struct noa_start_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u32 status;
+ u32 bss_index;
+};
+
+struct wcn36xx_hal_wlan_host_resume_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 configured_mcst_bcst_filter_setting;
+};
+
+struct wcn36xx_hal_host_resume_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+struct wcn36xx_hal_del_ba_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u16 sta_idx;
+
+ /* Peer MAC Address, whose BA session has timed out */
+ u8 peer_addr[ETH_ALEN];
+
+ /* TID for which a BA session timeout is being triggered */
+ u8 ba_tid;
+
+ /* DELBA direction
+ * 1 - Originator
+ * 0 - Recipient
+ */
+ u8 direction;
+
+ u32 reason_code;
+
+ /* TO SUPPORT BT-AMP */
+ u8 bssid[ETH_ALEN];
+};
+
+/* PNO Messages */
+
+/* Max number of channels that a network can be found on */
+#define WCN36XX_HAL_PNO_MAX_NETW_CHANNELS 26
+
+/* Max number of channels that a network can be found on */
+#define WCN36XX_HAL_PNO_MAX_NETW_CHANNELS_EX 60
+
+/* Maximum numbers of networks supported by PNO */
+#define WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS 16
+
+/* The number of scan time intervals that can be programmed into PNO */
+#define WCN36XX_HAL_PNO_MAX_SCAN_TIMERS 10
+
+/* Maximum size of the probe template */
+#define WCN36XX_HAL_PNO_MAX_PROBE_SIZE 450
+
+/* Type of PNO enabling:
+ *
+ * Immediate - scanning will start immediately and PNO procedure will be
+ * repeated based on timer
+ *
+ * Suspend - scanning will start at suspend
+ *
+ * Resume - scanning will start on system resume
+ */
+enum pno_mode {
+ PNO_MODE_IMMEDIATE,
+ PNO_MODE_ON_SUSPEND,
+ PNO_MODE_ON_RESUME,
+ PNO_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+/* Authentication type */
+enum auth_type {
+ AUTH_TYPE_ANY = 0,
+ AUTH_TYPE_OPEN_SYSTEM = 1,
+
+ /* Upper layer authentication types */
+ AUTH_TYPE_WPA = 2,
+ AUTH_TYPE_WPA_PSK = 3,
+
+ AUTH_TYPE_RSN = 4,
+ AUTH_TYPE_RSN_PSK = 5,
+ AUTH_TYPE_FT_RSN = 6,
+ AUTH_TYPE_FT_RSN_PSK = 7,
+ AUTH_TYPE_WAPI_WAI_CERTIFICATE = 8,
+ AUTH_TYPE_WAPI_WAI_PSK = 9,
+
+ AUTH_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+/* Encryption type */
+enum ed_type {
+ ED_ANY = 0,
+ ED_NONE = 1,
+ ED_WEP = 2,
+ ED_TKIP = 3,
+ ED_CCMP = 4,
+ ED_WPI = 5,
+
+ ED_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+/* SSID broadcast type */
+enum ssid_bcast_type {
+ BCAST_UNKNOWN = 0,
+ BCAST_NORMAL = 1,
+ BCAST_HIDDEN = 2,
+
+ BCAST_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE
+};
+
+/* The network description for which PNO will have to look for */
+struct network_type {
+ /* SSID of the BSS */
+ struct wcn36xx_hal_mac_ssid ssid;
+
+ /* Authentication type for the network */
+ enum auth_type authentication;
+
+ /* Encryption type for the network */
+ enum ed_type encryption;
+
+ /* Indicate the channel on which the Network can be found 0 - if
+ * all channels */
+ u8 channel_count;
+ u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS];
+
+ /* Indicates the RSSI threshold for the network to be considered */
+ u8 rssi_threshold;
+};
+
+struct scan_timer {
+ /* How much it should wait */
+ u32 value;
+
+ /* How many times it should repeat that wait value 0 - keep using
+ * this timer until PNO is disabled */
+ u32 repeat;
+
+ /* e.g: 2 3 4 0 - it will wait 2s between consecutive scans for 3
+ * times - after that it will wait 4s between consecutive scans
+ * until disabled */
+};
+
+/* The network parameters to be sent to the PNO algorithm */
+struct scan_timers_type {
+ /* set to 0 if you wish for PNO to use its default telescopic timer */
+ u8 count;
+
+ /* A set value represents the amount of time that PNO will wait
+ * between two consecutive scan procedures If the desired is for a
+ * uniform timer that fires always at the exact same interval - one
+ * single value is to be set If there is a desire for a more
+ * complex - telescopic like timer multiple values can be set -
+ * once PNO reaches the end of the array it will continue scanning
+ * at intervals presented by the last value */
+ struct scan_timer values[WCN36XX_HAL_PNO_MAX_SCAN_TIMERS];
+};
+
+/* Preferred network list request */
+struct set_pref_netw_list_req {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Enable PNO */
+ u32 enable;
+
+ /* Immediate, On Suspend, On Resume */
+ enum pno_mode mode;
+
+ /* Number of networks sent for PNO */
+ u32 networks_count;
+
+ /* The networks that PNO needs to look for */
+ struct network_type networks[WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS];
+
+ /* The scan timers required for PNO */
+ struct scan_timers_type scan_timers;
+
+ /* Probe template for 2.4GHz band */
+ u16 band_24g_probe_size;
+ u8 band_24g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE];
+
+ /* Probe template for 5GHz band */
+ u16 band_5g_probe_size;
+ u8 band_5g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE];
+};
+
+/* The network description for which PNO will have to look for */
+struct network_type_new {
+ /* SSID of the BSS */
+ struct wcn36xx_hal_mac_ssid ssid;
+
+ /* Authentication type for the network */
+ enum auth_type authentication;
+
+ /* Encryption type for the network */
+ enum ed_type encryption;
+
+ /* SSID broadcast type, normal, hidden or unknown */
+ enum ssid_bcast_type bcast_network_type;
+
+ /* Indicate the channel on which the Network can be found 0 - if
+ * all channels */
+ u8 channel_count;
+ u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS];
+
+ /* Indicates the RSSI threshold for the network to be considered */
+ u8 rssi_threshold;
+};
+
+/* Preferred network list request new */
+struct set_pref_netw_list_req_new {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Enable PNO */
+ u32 enable;
+
+ /* Immediate, On Suspend, On Resume */
+ enum pno_mode mode;
+
+ /* Number of networks sent for PNO */
+ u32 networks_count;
+
+ /* The networks that PNO needs to look for */
+ struct network_type_new networks[WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS];
+
+ /* The scan timers required for PNO */
+ struct scan_timers_type scan_timers;
+
+ /* Probe template for 2.4GHz band */
+ u16 band_24g_probe_size;
+ u8 band_24g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE];
+
+ /* Probe template for 5GHz band */
+ u16 band_5g_probe_size;
+ u8 band_5g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE];
+};
+
+/* Preferred network list response */
+struct set_pref_netw_list_resp {
+ struct wcn36xx_hal_msg_header header;
+
+ /* status of the request - just to indicate that PNO has
+ * acknowledged the request and will start scanning */
+ u32 status;
+};
+
+/* Preferred network found indication */
+struct pref_netw_found_ind {
+
+ struct wcn36xx_hal_msg_header header;
+
+ /* Network that was found with the highest RSSI */
+ struct wcn36xx_hal_mac_ssid ssid;
+
+ /* Indicates the RSSI */
+ u8 rssi;
+};
+
+/* RSSI Filter request */
+struct set_rssi_filter_req {
+ struct wcn36xx_hal_msg_header header;
+
+ /* RSSI Threshold */
+ u8 rssi_threshold;
+};
+
+/* Set RSSI filter resp */
+struct set_rssi_filter_resp {
+ struct wcn36xx_hal_msg_header header;
+
+ /* status of the request */
+ u32 status;
+};
+
+/* Update scan params - sent from host to PNO to be used during PNO
+ * scanningx */
+struct wcn36xx_hal_update_scan_params_req {
+
+ struct wcn36xx_hal_msg_header header;
+
+ /* Host setting for 11d */
+ u8 dot11d_enabled;
+
+ /* Lets PNO know that host has determined the regulatory domain */
+ u8 dot11d_resolved;
+
+ /* Channels on which PNO is allowed to scan */
+ u8 channel_count;
+ u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS];
+
+ /* Minimum channel time */
+ u16 active_min_ch_time;
+
+ /* Maximum channel time */
+ u16 active_max_ch_time;
+
+ /* Minimum channel time */
+ u16 passive_min_ch_time;
+
+ /* Maximum channel time */
+ u16 passive_max_ch_time;
+
+ /* Cb State */
+ enum phy_chan_bond_state state;
+} __packed;
+
+/* Update scan params - sent from host to PNO to be used during PNO
+ * scanningx */
+struct update_scan_params_req_ex {
+
+ struct wcn36xx_hal_msg_header header;
+
+ /* Host setting for 11d */
+ u8 dot11d_enabled;
+
+ /* Lets PNO know that host has determined the regulatory domain */
+ u8 dot11d_resolved;
+
+ /* Channels on which PNO is allowed to scan */
+ u8 channel_count;
+ u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS_EX];
+
+ /* Minimum channel time */
+ u16 active_min_ch_time;
+
+ /* Maximum channel time */
+ u16 active_max_ch_time;
+
+ /* Minimum channel time */
+ u16 passive_min_ch_time;
+
+ /* Maximum channel time */
+ u16 passive_max_ch_time;
+
+ /* Cb State */
+ enum phy_chan_bond_state state;
+};
+
+/* Update scan params - sent from host to PNO to be used during PNO
+ * scanningx */
+struct wcn36xx_hal_update_scan_params_resp {
+
+ struct wcn36xx_hal_msg_header header;
+
+ /* status of the request */
+ u32 status;
+} __packed;
+
+struct wcn36xx_hal_set_tx_per_tracking_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* 0: disable, 1:enable */
+ u8 tx_per_tracking_enable;
+
+ /* Check period, unit is sec. */
+ u8 tx_per_tracking_period;
+
+ /* (Fail TX packet)/(Total TX packet) ratio, the unit is 10%. */
+ u8 tx_per_tracking_ratio;
+
+ /* A watermark of check number, once the tx packet exceed this
+ * number, we do the check, default is 5 */
+ u32 tx_per_tracking_watermark;
+};
+
+struct wcn36xx_hal_set_tx_per_tracking_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+};
+
+struct tx_per_hit_ind_msg {
+ struct wcn36xx_hal_msg_header header;
+};
+
+/* Packet Filtering Definitions Begin */
+#define WCN36XX_HAL_PROTOCOL_DATA_LEN 8
+#define WCN36XX_HAL_MAX_NUM_MULTICAST_ADDRESS 240
+#define WCN36XX_HAL_MAX_NUM_FILTERS 20
+#define WCN36XX_HAL_MAX_CMP_PER_FILTER 10
+
+enum wcn36xx_hal_receive_packet_filter_type {
+ HAL_RCV_FILTER_TYPE_INVALID,
+ HAL_RCV_FILTER_TYPE_FILTER_PKT,
+ HAL_RCV_FILTER_TYPE_BUFFER_PKT,
+ HAL_RCV_FILTER_TYPE_MAX_ENUM_SIZE
+};
+
+enum wcn36xx_hal_rcv_pkt_flt_protocol_type {
+ HAL_FILTER_PROTO_TYPE_INVALID,
+ HAL_FILTER_PROTO_TYPE_MAC,
+ HAL_FILTER_PROTO_TYPE_ARP,
+ HAL_FILTER_PROTO_TYPE_IPV4,
+ HAL_FILTER_PROTO_TYPE_IPV6,
+ HAL_FILTER_PROTO_TYPE_UDP,
+ HAL_FILTER_PROTO_TYPE_MAX
+};
+
+enum wcn36xx_hal_rcv_pkt_flt_cmp_flag_type {
+ HAL_FILTER_CMP_TYPE_INVALID,
+ HAL_FILTER_CMP_TYPE_EQUAL,
+ HAL_FILTER_CMP_TYPE_MASK_EQUAL,
+ HAL_FILTER_CMP_TYPE_NOT_EQUAL,
+ HAL_FILTER_CMP_TYPE_MAX
+};
+
+struct wcn36xx_hal_rcv_pkt_filter_params {
+ u8 protocol_layer;
+ u8 cmp_flag;
+
+ /* Length of the data to compare */
+ u16 data_length;
+
+ /* from start of the respective frame header */
+ u8 data_offset;
+
+ /* Reserved field */
+ u8 reserved;
+
+ /* Data to compare */
+ u8 compare_data[WCN36XX_HAL_PROTOCOL_DATA_LEN];
+
+ /* Mask to be applied on the received packet data before compare */
+ u8 data_mask[WCN36XX_HAL_PROTOCOL_DATA_LEN];
+};
+
+struct wcn36xx_hal_sessionized_rcv_pkt_filter_cfg_type {
+ u8 id;
+ u8 type;
+ u8 params_count;
+ u32 coleasce_time;
+ u8 bss_index;
+ struct wcn36xx_hal_rcv_pkt_filter_params params[1];
+};
+
+struct wcn36xx_hal_set_rcv_pkt_filter_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 id;
+ u8 type;
+ u8 params_count;
+ u32 coalesce_time;
+ struct wcn36xx_hal_rcv_pkt_filter_params params[1];
+};
+
+struct wcn36xx_hal_rcv_flt_mc_addr_list_type {
+ /* from start of the respective frame header */
+ u8 data_offset;
+
+ u32 mc_addr_count;
+ u8 mc_addr[ETH_ALEN][WCN36XX_HAL_MAX_NUM_MULTICAST_ADDRESS];
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_set_pkt_filter_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_rcv_flt_pkt_match_cnt_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_rcv_flt_pkt_match_cnt {
+ u8 id;
+ u32 match_cnt;
+};
+
+struct wcn36xx_hal_rcv_flt_pkt_match_cnt_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Success or Failure */
+ u32 status;
+
+ u32 match_count;
+ struct wcn36xx_hal_rcv_flt_pkt_match_cnt
+ matches[WCN36XX_HAL_MAX_NUM_FILTERS];
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_rcv_flt_pkt_clear_param {
+ /* only valid for response message */
+ u32 status;
+ u8 id;
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_rcv_flt_pkt_clear_req_msg {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_rcv_flt_pkt_clear_param param;
+};
+
+struct wcn36xx_hal_rcv_flt_pkt_clear_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_rcv_flt_pkt_clear_param param;
+};
+
+struct wcn36xx_hal_rcv_flt_pkt_set_mc_list_req_msg {
+ struct wcn36xx_hal_msg_header header;
+ struct wcn36xx_hal_rcv_flt_mc_addr_list_type mc_addr_list;
+};
+
+struct wcn36xx_hal_rcv_flt_pkt_set_mc_list_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+ u32 status;
+ u8 bss_index;
+};
+
+/* Packet Filtering Definitions End */
+
+struct set_power_params_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Ignore DTIM */
+ u32 ignore_dtim;
+
+ /* DTIM Period */
+ u32 dtim_period;
+
+ /* Listen Interval */
+ u32 listen_interval;
+
+ /* Broadcast Multicast Filter */
+ u32 bcast_mcast_filter;
+
+ /* Beacon Early Termination */
+ u32 enable_bet;
+
+ /* Beacon Early Termination Interval */
+ u32 bet_interval;
+};
+
+struct set_power_params_resp {
+
+ struct wcn36xx_hal_msg_header header;
+
+ /* status of the request */
+ u32 status;
+};
+
+/* Capability bitmap exchange definitions and macros starts */
+
+enum place_holder_in_cap_bitmap {
+ MCC = 0,
+ P2P = 1,
+ DOT11AC = 2,
+ SLM_SESSIONIZATION = 3,
+ DOT11AC_OPMODE = 4,
+ SAP32STA = 5,
+ TDLS = 6,
+ P2P_GO_NOA_DECOUPLE_INIT_SCAN = 7,
+ WLANACTIVE_OFFLOAD = 8,
+ BEACON_OFFLOAD = 9,
+ SCAN_OFFLOAD = 10,
+ ROAM_OFFLOAD = 11,
+ BCN_MISS_OFFLOAD = 12,
+ STA_POWERSAVE = 13,
+ STA_ADVANCED_PWRSAVE = 14,
+ AP_UAPSD = 15,
+ AP_DFS = 16,
+ BLOCKACK = 17,
+ PHY_ERR = 18,
+ BCN_FILTER = 19,
+ RTT = 20,
+ RATECTRL = 21,
+ WOW = 22,
+ MAX_FEATURE_SUPPORTED = 128,
+};
+
+struct wcn36xx_hal_feat_caps_msg {
+
+ struct wcn36xx_hal_msg_header header;
+
+ u32 feat_caps[4];
+} __packed;
+
+/* status codes to help debug rekey failures */
+enum gtk_rekey_status {
+ WCN36XX_HAL_GTK_REKEY_STATUS_SUCCESS = 0,
+
+ /* rekey detected, but not handled */
+ WCN36XX_HAL_GTK_REKEY_STATUS_NOT_HANDLED = 1,
+
+ /* MIC check error on M1 */
+ WCN36XX_HAL_GTK_REKEY_STATUS_MIC_ERROR = 2,
+
+ /* decryption error on M1 */
+ WCN36XX_HAL_GTK_REKEY_STATUS_DECRYPT_ERROR = 3,
+
+ /* M1 replay detected */
+ WCN36XX_HAL_GTK_REKEY_STATUS_REPLAY_ERROR = 4,
+
+ /* missing GTK key descriptor in M1 */
+ WCN36XX_HAL_GTK_REKEY_STATUS_MISSING_KDE = 5,
+
+ /* missing iGTK key descriptor in M1 */
+ WCN36XX_HAL_GTK_REKEY_STATUS_MISSING_IGTK_KDE = 6,
+
+ /* key installation error */
+ WCN36XX_HAL_GTK_REKEY_STATUS_INSTALL_ERROR = 7,
+
+ /* iGTK key installation error */
+ WCN36XX_HAL_GTK_REKEY_STATUS_IGTK_INSTALL_ERROR = 8,
+
+ /* GTK rekey M2 response TX error */
+ WCN36XX_HAL_GTK_REKEY_STATUS_RESP_TX_ERROR = 9,
+
+ /* non-specific general error */
+ WCN36XX_HAL_GTK_REKEY_STATUS_GEN_ERROR = 255
+};
+
+/* wake reason types */
+enum wake_reason_type {
+ WCN36XX_HAL_WAKE_REASON_NONE = 0,
+
+ /* magic packet match */
+ WCN36XX_HAL_WAKE_REASON_MAGIC_PACKET = 1,
+
+ /* host defined pattern match */
+ WCN36XX_HAL_WAKE_REASON_PATTERN_MATCH = 2,
+
+ /* EAP-ID frame detected */
+ WCN36XX_HAL_WAKE_REASON_EAPID_PACKET = 3,
+
+ /* start of EAPOL 4-way handshake detected */
+ WCN36XX_HAL_WAKE_REASON_EAPOL4WAY_PACKET = 4,
+
+ /* network scan offload match */
+ WCN36XX_HAL_WAKE_REASON_NETSCAN_OFFL_MATCH = 5,
+
+ /* GTK rekey status wakeup (see status) */
+ WCN36XX_HAL_WAKE_REASON_GTK_REKEY_STATUS = 6,
+
+ /* BSS connection lost */
+ WCN36XX_HAL_WAKE_REASON_BSS_CONN_LOST = 7,
+};
+
+/*
+ Wake Packet which is saved at tWakeReasonParams.DataStart
+ This data is sent for any wake reasons that involve a packet-based wakeup :
+
+ WCN36XX_HAL_WAKE_REASON_TYPE_MAGIC_PACKET
+ WCN36XX_HAL_WAKE_REASON_TYPE_PATTERN_MATCH
+ WCN36XX_HAL_WAKE_REASON_TYPE_EAPID_PACKET
+ WCN36XX_HAL_WAKE_REASON_TYPE_EAPOL4WAY_PACKET
+ WCN36XX_HAL_WAKE_REASON_TYPE_GTK_REKEY_STATUS
+
+ The information is provided to the host for auditing and debug purposes
+
+*/
+
+/* Wake reason indication */
+struct wcn36xx_hal_wake_reason_ind {
+ struct wcn36xx_hal_msg_header header;
+
+ /* see tWakeReasonType */
+ u32 reason;
+
+ /* argument specific to the reason type */
+ u32 reason_arg;
+
+ /* length of optional data stored in this message, in case HAL
+ * truncates the data (i.e. data packets) this length will be less
+ * than the actual length */
+ u32 stored_data_len;
+
+ /* actual length of data */
+ u32 actual_data_len;
+
+ /* variable length start of data (length == storedDataLen) see
+ * specific wake type */
+ u8 data_start[1];
+
+ u32 bss_index:8;
+ u32 reserved:24;
+};
+
+#define WCN36XX_HAL_GTK_KEK_BYTES 16
+#define WCN36XX_HAL_GTK_KCK_BYTES 16
+
+#define WCN36XX_HAL_GTK_OFFLOAD_FLAGS_DISABLE (1 << 0)
+
+#define GTK_SET_BSS_KEY_TAG 0x1234AA55
+
+struct wcn36xx_hal_gtk_offload_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* optional flags */
+ u32 flags;
+
+ /* Key confirmation key */
+ u8 kck[WCN36XX_HAL_GTK_KCK_BYTES];
+
+ /* key encryption key */
+ u8 kek[WCN36XX_HAL_GTK_KEK_BYTES];
+
+ /* replay counter */
+ u64 key_replay_counter;
+
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_gtk_offload_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_gtk_offload_get_info_req_msg {
+ struct wcn36xx_hal_msg_header header;
+ u8 bss_index;
+};
+
+struct wcn36xx_hal_gtk_offload_get_info_rsp_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+
+ /* last rekey status when the rekey was offloaded */
+ u32 last_rekey_status;
+
+ /* current replay counter value */
+ u64 key_replay_counter;
+
+ /* total rekey attempts */
+ u32 total_rekey_count;
+
+ /* successful GTK rekeys */
+ u32 gtk_rekey_count;
+
+ /* successful iGTK rekeys */
+ u32 igtk_rekey_count;
+
+ u8 bss_index;
+};
+
+struct dhcp_info {
+ /* Indicates the device mode which indicates about the DHCP activity */
+ u8 device_mode;
+
+ u8 addr[ETH_ALEN];
+};
+
+struct dhcp_ind_status {
+ struct wcn36xx_hal_msg_header header;
+
+ /* success or failure */
+ u32 status;
+};
+
+/*
+ * Thermal Mitigation mode of operation.
+ *
+ * WCN36XX_HAL_THERMAL_MITIGATION_MODE_0 - Based on AMPDU disabling aggregation
+ *
+ * WCN36XX_HAL_THERMAL_MITIGATION_MODE_1 - Based on AMPDU disabling aggregation
+ * and reducing transmit power
+ *
+ * WCN36XX_HAL_THERMAL_MITIGATION_MODE_2 - Not supported */
+enum wcn36xx_hal_thermal_mitigation_mode_type {
+ HAL_THERMAL_MITIGATION_MODE_INVALID = -1,
+ HAL_THERMAL_MITIGATION_MODE_0,
+ HAL_THERMAL_MITIGATION_MODE_1,
+ HAL_THERMAL_MITIGATION_MODE_2,
+ HAL_THERMAL_MITIGATION_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE,
+};
+
+
+/*
+ * Thermal Mitigation level.
+ * Note the levels are incremental i.e WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_2 =
+ * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_0 +
+ * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_1
+ *
+ * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_0 - lowest level of thermal mitigation.
+ * This level indicates normal mode of operation
+ *
+ * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_1 - 1st level of thermal mitigation
+ *
+ * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_2 - 2nd level of thermal mitigation
+ *
+ * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_3 - 3rd level of thermal mitigation
+ *
+ * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_4 - 4th level of thermal mitigation
+ */
+enum wcn36xx_hal_thermal_mitigation_level_type {
+ HAL_THERMAL_MITIGATION_LEVEL_INVALID = -1,
+ HAL_THERMAL_MITIGATION_LEVEL_0,
+ HAL_THERMAL_MITIGATION_LEVEL_1,
+ HAL_THERMAL_MITIGATION_LEVEL_2,
+ HAL_THERMAL_MITIGATION_LEVEL_3,
+ HAL_THERMAL_MITIGATION_LEVEL_4,
+ HAL_THERMAL_MITIGATION_LEVEL_MAX = WCN36XX_HAL_MAX_ENUM_SIZE,
+};
+
+
+/* WCN36XX_HAL_SET_THERMAL_MITIGATION_REQ */
+struct set_thermal_mitigation_req_msg {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Thermal Mitigation Operation Mode */
+ enum wcn36xx_hal_thermal_mitigation_mode_type mode;
+
+ /* Thermal Mitigation Level */
+ enum wcn36xx_hal_thermal_mitigation_level_type level;
+};
+
+struct set_thermal_mitigation_resp {
+
+ struct wcn36xx_hal_msg_header header;
+
+ /* status of the request */
+ u32 status;
+};
+
+/* Per STA Class B Statistics. Class B statistics are STA TX/RX stats
+ * provided to FW from Host via periodic messages */
+struct stats_class_b_ind {
+ struct wcn36xx_hal_msg_header header;
+
+ /* Duration over which this stats was collected */
+ u32 duration;
+
+ /* Per STA Stats */
+
+ /* TX stats */
+ u32 tx_bytes_pushed;
+ u32 tx_packets_pushed;
+
+ /* RX stats */
+ u32 rx_bytes_rcvd;
+ u32 rx_packets_rcvd;
+ u32 rx_time_total;
+};
+
+#endif /* _HAL_H_ */
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
