The gain level control for the test tone has been changed. This
calbration test tone is used to determine the i/q compensation.
The i/q calibration routine has been reworked to accomodate this.
Cc: Jonas Gorski <jogo@xxxxxxxxxxx>
Tested-by: David Herrmann <dh.herrmann@xxxxxxxxx>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx>
Reviewed-by: Hante Meuleman <meuleman@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
.../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c | 78 +++++++++++++++-----
1 file changed, 58 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index 8dc5d0f..236e8d9 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -1329,6 +1329,43 @@ static u32 wlc_lcnphy_measure_digital_power(struct brcms_phy *pi, u16 nsamples)
return (iq_est.i_pwr + iq_est.q_pwr) / nsamples;
}
+static bool wlc_lcnphy_rx_iq_cal_gain(struct brcms_phy *pi, u16 biq1_gain,
+ u16 tia_gain, u16 lna2_gain)
+{
+ u32 i_thresh_l, q_thresh_l;
+ u32 i_thresh_h, q_thresh_h;
+ struct lcnphy_iq_est iq_est_h, iq_est_l;
+
+ wlc_lcnphy_set_rx_gain_by_distribution(pi, 0, 0, 0, biq1_gain, tia_gain,
+ lna2_gain, 0);
+
+ wlc_lcnphy_rx_gain_override_enable(pi, true);
+ wlc_lcnphy_start_tx_tone(pi, 2000, (40 >> 1), 0);
+ udelay(500);
+ write_radio_reg(pi, RADIO_2064_REG112, 0);
+ if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_l))
+ return false;
+
+ wlc_lcnphy_start_tx_tone(pi, 2000, 40, 0);
+ udelay(500);
+ write_radio_reg(pi, RADIO_2064_REG112, 0);
+ if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_h))
+ return false;
+
+ i_thresh_l = (iq_est_l.i_pwr << 1);
+ i_thresh_h = (iq_est_l.i_pwr << 2) + iq_est_l.i_pwr;
+
+ q_thresh_l = (iq_est_l.q_pwr << 1);
+ q_thresh_h = (iq_est_l.q_pwr << 2) + iq_est_l.q_pwr;
+ if ((iq_est_h.i_pwr > i_thresh_l) &&
+ (iq_est_h.i_pwr < i_thresh_h) &&
+ (iq_est_h.q_pwr > q_thresh_l) &&
+ (iq_est_h.q_pwr < q_thresh_h))
+ return true;
+
+ return false;
+}
+
static bool
wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
const struct lcnphy_rx_iqcomp *iqcomp,
@@ -1343,8 +1380,8 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old,
rfoverride3_old, rfoverride3val_old, rfoverride4_old,
rfoverride4val_old, afectrlovr_old, afectrlovrval_old;
- int tia_gain;
- u32 received_power, rx_pwr_threshold;
+ int tia_gain, lna2_gain, biq1_gain;
+ bool set_gain;
u16 old_sslpnCalibClkEnCtrl, old_sslpnRxFeClkEnCtrl;
u16 values_to_save[11];
s16 *ptr;
@@ -1432,29 +1469,30 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
- wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0);
write_phy_reg(pi, 0x6da, 0xffff);
or_phy_reg(pi, 0x6db, 0x3);
- wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
- wlc_lcnphy_rx_gain_override_enable(pi, true);
-
- tia_gain = 8;
- rx_pwr_threshold = 950;
- while (tia_gain > 0) {
- tia_gain -= 1;
- wlc_lcnphy_set_rx_gain_by_distribution(pi,
- 0, 0, 2, 2,
- (u16)
- tia_gain, 1, 0);
- udelay(500);
- received_power =
- wlc_lcnphy_measure_digital_power(pi, 2000);
- if (received_power < rx_pwr_threshold)
- break;
+ wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
+ for (lna2_gain = 3; lna2_gain >= 0; lna2_gain--) {
+ for (tia_gain = 4; tia_gain >= 0; tia_gain--) {
+ for (biq1_gain = 6; biq1_gain >= 0; biq1_gain--) {
+ set_gain = wlc_lcnphy_rx_iq_cal_gain(pi,
+ (u16)
+ biq1_gain,
+ (u16)
+ tia_gain,
+ (u16)
+ lna2_gain);
+ if (!set_gain)
+ continue;
+
+ result = wlc_lcnphy_calc_rx_iq_comp(pi, 1024);
+ goto stop_tone;
+ }
+ }
}
- result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff);
+stop_tone:
wlc_lcnphy_stop_tx_tone(pi);
write_phy_reg(pi, 0x631, Core1TxControl_old);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
