On 02/07/2008 10:25 PM, Tino Keitel wrote:
On Wed, Feb 06, 2008 at 10:46:39 -0500, Bob Copeland wrote:
We failed to resume after a hardware reset here for a whole second. Is there any
version of ath5k which worked for you (is this a regression)?
I cannot speak for Tino, but my ath5k never worked in MacBook -- it
failed the same way, and I believe the hardware was the same. My
understanding was that it was a known bug with PCIE devices, but I got
that out of reading list archives.
Nick Kossifidis and I are in the process of debugging this -- we
determined that AR5K_RESET_CTL_PCI hangs the card in hw_nic_wakeup.
It doesn't look like there is any general support for 5424 cards yet.
Seems hold for this case too, as Bob noted.
I tried the patch, and the card was detected. I was able to associate
with an WPA2 AP and send/receive some traffic. But after a while the
interface broke:
ath0: No ProbeResp from current AP 00:14:bf:16:25:87 - assume out of
range
ath5k_hw_get_isr: 0x00000020
...
ath0: failed to set channel 165 (5825 MHz) for scan
ath0: failed to restore operational channel after scan
printk: 19 messages suppressed.
ath5k phy0: calibration timeout (2447MHz)
printk: 1 messages suppressed.
ath5k phy0: calibration timeout (2447MHz)
ath5k phy0: unable to reset hardware: -11
What's the srev a phy ver printed few lines above this, please?
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
