5/10 MHz channels should always use SIFS times as defined in IEEE
802.11-2012 18.4.4 (OFDM PHY characteristics). This makes it compatible
to ath5k, which does the same.
Signed-off-by: Simon Wunderlich <siwu@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/hw.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 151443b..b3a6891 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1069,7 +1069,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
tx_lat += 11;
- sifstime *= 2;
+ sifstime = 32;
ack_offset = 16;
slottime = 13;
} else if (IS_CHAN_QUARTER_RATE(chan)) {
@@ -1079,7 +1079,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
tx_lat += 22;
- sifstime *= 4;
+ sifstime = 64;
ack_offset = 32;
slottime = 21;
} else {
@@ -1116,7 +1116,6 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
ctstimeout += 48 - sifstime - ah->slottime;
}
-
ath9k_hw_set_sifs_time(ah, sifstime);
ath9k_hw_setslottime(ah, slottime);
ath9k_hw_set_ack_timeout(ah, acktimeout);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
