From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/recv.c | 220 +++++++++++++++++-----------------
1 file changed, 110 insertions(+), 110 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 9fabd5f..51e7d16 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -929,6 +929,116 @@ static void ath9k_process_tsf(struct ath_rx_status *rs,
rxs->mactime += 0x100000000ULL;
}
+#ifdef CONFIG_ATH9K_DEBUGFS
+static s8 fix_rssi_inv_only(u8 rssi_val)
+{
+ if (rssi_val == 128)
+ rssi_val = 0;
+ return (s8) rssi_val;
+}
+#endif
+
+/* returns 1 if this was a spectral frame, even if not handled. */
+static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
+ struct ath_rx_status *rs, u64 tsf)
+{
+#ifdef CONFIG_ATH9K_DEBUGFS
+ struct ath_hw *ah = sc->sc_ah;
+ u8 bins[SPECTRAL_HT20_NUM_BINS];
+ u8 *vdata = (u8 *)hdr;
+ struct fft_sample_ht20 fft_sample;
+ struct ath_radar_info *radar_info;
+ struct ath_ht20_mag_info *mag_info;
+ int len = rs->rs_datalen;
+ int dc_pos;
+ u16 length, max_magnitude;
+
+ /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer
+ * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT
+ * yet, but this is supposed to be possible as well.
+ */
+ if (rs->rs_phyerr != ATH9K_PHYERR_RADAR &&
+ rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT &&
+ rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL)
+ return 0;
+
+ /* check if spectral scan bit is set. This does not have to be checked
+ * if received through a SPECTRAL phy error, but shouldn't hurt.
+ */
+ radar_info = ((struct ath_radar_info *)&vdata[len]) - 1;
+ if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK))
+ return 0;
+
+ /* Variation in the data length is possible and will be fixed later.
+ * Note that we only support HT20 for now.
+ *
+ * TODO: add HT20_40 support as well.
+ */
+ if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) ||
+ (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1))
+ return 1;
+
+ fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20;
+ length = sizeof(fft_sample) - sizeof(fft_sample.tlv);
+ fft_sample.tlv.length = __cpu_to_be16(length);
+
+ fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq);
+ fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
+ fft_sample.noise = ah->noise;
+
+ switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) {
+ case 0:
+ /* length correct, nothing to do. */
+ memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS);
+ break;
+ case -1:
+ /* first byte missing, duplicate it. */
+ memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1);
+ bins[0] = vdata[0];
+ break;
+ case 2:
+ /* MAC added 2 extra bytes at bin 30 and 32, remove them. */
+ memcpy(bins, vdata, 30);
+ bins[30] = vdata[31];
+ memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31);
+ break;
+ case 1:
+ /* MAC added 2 extra bytes AND first byte is missing. */
+ bins[0] = vdata[0];
+ memcpy(&bins[0], vdata, 30);
+ bins[31] = vdata[31];
+ memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32);
+ break;
+ default:
+ return 1;
+ }
+
+ /* DC value (value in the middle) is the blind spot of the spectral
+ * sample and invalid, interpolate it.
+ */
+ dc_pos = SPECTRAL_HT20_NUM_BINS / 2;
+ bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2;
+
+ /* mag data is at the end of the frame, in front of radar_info */
+ mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
+
+ /* copy raw bins without scaling them */
+ memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS);
+ fft_sample.max_exp = mag_info->max_exp & 0xf;
+
+ max_magnitude = spectral_max_magnitude(mag_info->all_bins);
+ fft_sample.max_magnitude = __cpu_to_be16(max_magnitude);
+ fft_sample.max_index = spectral_max_index(mag_info->all_bins);
+ fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins);
+ fft_sample.tsf = __cpu_to_be64(tsf);
+
+ ath_debug_send_fft_sample(sc, &fft_sample.tlv);
+ return 1;
+#else
+ return 0;
+#endif
+}
+
/*
* For Decrypt or Demic errors, we only mark packet status here and always push
* up the frame up to let mac80211 handle the actual error case, be it no
@@ -1052,116 +1162,6 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common,
rxs->flag &= ~RX_FLAG_DECRYPTED;
}
-#ifdef CONFIG_ATH9K_DEBUGFS
-static s8 fix_rssi_inv_only(u8 rssi_val)
-{
- if (rssi_val == 128)
- rssi_val = 0;
- return (s8) rssi_val;
-}
-#endif
-
-/* returns 1 if this was a spectral frame, even if not handled. */
-static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
- struct ath_rx_status *rs, u64 tsf)
-{
-#ifdef CONFIG_ATH9K_DEBUGFS
- struct ath_hw *ah = sc->sc_ah;
- u8 bins[SPECTRAL_HT20_NUM_BINS];
- u8 *vdata = (u8 *)hdr;
- struct fft_sample_ht20 fft_sample;
- struct ath_radar_info *radar_info;
- struct ath_ht20_mag_info *mag_info;
- int len = rs->rs_datalen;
- int dc_pos;
- u16 length, max_magnitude;
-
- /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer
- * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT
- * yet, but this is supposed to be possible as well.
- */
- if (rs->rs_phyerr != ATH9K_PHYERR_RADAR &&
- rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT &&
- rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL)
- return 0;
-
- /* check if spectral scan bit is set. This does not have to be checked
- * if received through a SPECTRAL phy error, but shouldn't hurt.
- */
- radar_info = ((struct ath_radar_info *)&vdata[len]) - 1;
- if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK))
- return 0;
-
- /* Variation in the data length is possible and will be fixed later.
- * Note that we only support HT20 for now.
- *
- * TODO: add HT20_40 support as well.
- */
- if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) ||
- (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1))
- return 1;
-
- fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20;
- length = sizeof(fft_sample) - sizeof(fft_sample.tlv);
- fft_sample.tlv.length = __cpu_to_be16(length);
-
- fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq);
- fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
- fft_sample.noise = ah->noise;
-
- switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) {
- case 0:
- /* length correct, nothing to do. */
- memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS);
- break;
- case -1:
- /* first byte missing, duplicate it. */
- memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1);
- bins[0] = vdata[0];
- break;
- case 2:
- /* MAC added 2 extra bytes at bin 30 and 32, remove them. */
- memcpy(bins, vdata, 30);
- bins[30] = vdata[31];
- memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31);
- break;
- case 1:
- /* MAC added 2 extra bytes AND first byte is missing. */
- bins[0] = vdata[0];
- memcpy(&bins[0], vdata, 30);
- bins[31] = vdata[31];
- memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32);
- break;
- default:
- return 1;
- }
-
- /* DC value (value in the middle) is the blind spot of the spectral
- * sample and invalid, interpolate it.
- */
- dc_pos = SPECTRAL_HT20_NUM_BINS / 2;
- bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2;
-
- /* mag data is at the end of the frame, in front of radar_info */
- mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
-
- /* copy raw bins without scaling them */
- memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS);
- fft_sample.max_exp = mag_info->max_exp & 0xf;
-
- max_magnitude = spectral_max_magnitude(mag_info->all_bins);
- fft_sample.max_magnitude = __cpu_to_be16(max_magnitude);
- fft_sample.max_index = spectral_max_index(mag_info->all_bins);
- fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins);
- fft_sample.tsf = __cpu_to_be64(tsf);
-
- ath_debug_send_fft_sample(sc, &fft_sample.tlv);
- return 1;
-#else
- return 0;
-#endif
-}
-
static void ath9k_apply_ampdu_details(struct ath_softc *sc,
struct ath_rx_status *rs, struct ieee80211_rx_status *rxs)
{
--
1.8.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
