On Tue, Aug 6, 2013 at 8:36 AM, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote: > Hi all, > > Changes since 20130805: > > The ext4 tree still has its build failure so I used the version from > next-20130726. > > The akpm tree gained a conflict against the drm-intel tree. > > ---------------------------------------------------------------------------- > Just FYI: I cannot connect to my WLAN-AP, not sure what's wrong. I pulled in latest (for-john) mac80211(-next) and iwlwifi-(fixes|next) into next-20130806 which did not help. OK, I did not try with debugging enabled and/or w/o Network-Manager. If you know of an issue, please let me know. - Sedat -
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-rc4-next20130806-2-iniza-small (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Tue Aug 6 15:29:04 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FE0000000 write-back [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0204c000, 0x0204cfff] PGTABLE [ 0.000000] BRK [0x0204d000, 0x0204dfff] PGTABLE [ 0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff] [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M [ 0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff] [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff] [ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M [ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k [ 0.000000] BRK [0x02050000, 0x02050fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff] [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x37962000-0x37ca8fff] [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf47000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1021500 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12127 pages used for memmap [ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1785 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s87424 r8192 d23168 u262144 [ 0.000000] pcpu-alloc: s87424 r8192 d23168 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3938460K/4086000K available (7128K kernel code, 1045K rwdata, 3140K rodata, 1332K init, 1984K bss, 147540K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.481 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.96 BogoMIPS (lpj=6385924) [ 0.000080] pid_max: default: 32768 minimum: 301 [ 0.000245] Security Framework initialized [ 0.000302] AppArmor: AppArmor initialized [ 0.000339] Yama: becoming mindful. [ 0.000747] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001854] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002355] Mount-cache hash table entries: 256 [ 0.002920] Initializing cgroup subsys memory [ 0.003016] Initializing cgroup subsys devices [ 0.003054] Initializing cgroup subsys freezer [ 0.003093] Initializing cgroup subsys blkio [ 0.003129] Initializing cgroup subsys perf_event [ 0.003168] Initializing cgroup subsys hugetlb [ 0.003260] Disabled fast string operations [ 0.003296] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 0 [ 0.003373] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003373] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003438] mce: CPU supports 7 MCE banks [ 0.003488] CPU0: Thermal monitoring enabled (TM1) [ 0.003534] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003534] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003534] tlb_flushall_shift: 5 [ 0.003707] Freeing SMP alternatives memory: 24K (ffffffff81e54000 - ffffffff81e5a000) [ 0.004788] ACPI: Core revision 20130626 [ 0.015466] ACPI: All ACPI Tables successfully acquired [ 0.029381] ftrace: allocating 27101 entries in 106 pages [ 0.044322] Enabling x2apic [ 0.044360] Enabled x2apic [ 0.044424] Switched APIC routing to physical x2apic. [ 0.045386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.085084] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.085198] TSC deadline timer enabled [ 0.085210] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.085359] ... version: 3 [ 0.085395] ... bit width: 48 [ 0.085430] ... generic registers: 4 [ 0.085466] ... value mask: 0000ffffffffffff [ 0.085505] ... max period: 0000ffffffffffff [ 0.085543] ... fixed-purpose events: 3 [ 0.085579] ... event mask: 000000070000000f [ 0.098561] Disabled fast string operations [ 0.101741] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.113326] Disabled fast string operations [ 0.126936] Disabled fast string operations [ 0.087583] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.129059] Brought up 4 CPUs [ 0.129162] smpboot: Total of 4 processors activated (12771.84 BogoMIPS) [ 0.133226] devtmpfs: initialized [ 0.135246] EVM: security.selinux [ 0.135282] EVM: security.SMACK64 [ 0.135316] EVM: security.capability [ 0.135439] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes) [ 0.136965] regulator-dummy: no parameters [ 0.137155] NET: Registered protocol family 16 [ 0.137497] cpuidle: using governor ladder [ 0.137534] cpuidle: using governor menu [ 0.137609] ACPI: bus type PCI registered [ 0.137757] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.137816] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.144761] PCI: Using configuration type 1 for base access [ 0.148116] bio: create slab <bio-0> at 0 [ 0.148571] ACPI: Added _OSI(Module Device) [ 0.148609] ACPI: Added _OSI(Processor Device) [ 0.148646] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.148683] ACPI: Added _OSI(Processor Aggregator Device) [ 0.150522] ACPI: EC: Look up EC in DSDT [ 0.176878] ACPI: Executed 1 blocks of module-level executable AML code [ 0.182858] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.194810] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.195401] ACPI: Dynamic OEM Table Load: [ 0.195471] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.205316] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.205983] ACPI: Dynamic OEM Table Load: [ 0.206053] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.217443] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.218006] ACPI: Dynamic OEM Table Load: [ 0.218075] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.231172] ACPI: Interpreter enabled [ 0.231223] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130626/hwxface-571) [ 0.231331] ACPI: (supports S0 S1 S3 S4 S5) [ 0.231368] ACPI: Using IOAPIC for interrupt routing [ 0.231460] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.231743] ACPI: No dock devices found. [ 0.255550] ACPI: Power Resource [FN00] (off) [ 0.255772] ACPI: Power Resource [FN01] (off) [ 0.255986] ACPI: Power Resource [FN02] (off) [ 0.256200] ACPI: Power Resource [FN03] (off) [ 0.256417] ACPI: Power Resource [FN04] (off) [ 0.257594] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.257967] \_SB_.PCI0:_OSC invalid UUID [ 0.257969] _OSC request data:1 8 0 [ 0.258874] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.258986] PCI host bridge to bus 0000:00 [ 0.259025] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.259066] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.259107] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.259148] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.259190] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.259232] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.259288] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.259440] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.259453] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.259461] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.259466] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.259647] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.259674] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit] [ 0.259760] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.259914] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.259938] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff] [ 0.260039] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.260144] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.260163] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.260242] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.260287] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.260393] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.260484] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.260531] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.260638] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.260727] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.260787] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.260893] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.260982] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.261107] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.261132] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff] [ 0.261233] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.261341] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.261537] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.261559] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.261569] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.261579] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.261589] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.261599] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.261609] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff] [ 0.261662] pci 0000:00:1f.2: PME# supported from D3hot [ 0.261777] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.261796] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit] [ 0.261821] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.262189] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000 [ 0.262370] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit] [ 0.263121] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.263292] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.269413] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.269457] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.269635] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.269704] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.269827] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.269904] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.270243] pci 0000:02:00.0: supports D1 D2 [ 0.270244] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.270372] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.277334] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.277396] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.277405] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.277532] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.277570] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit] [ 0.277767] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.285306] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.285382] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.285565] \_SB_.PCI0:_OSC invalid UUID [ 0.285566] _OSC request data:1 1f 0 [ 0.285571] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.285627] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.286526] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.286876] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.287268] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.287613] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.287958] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.288330] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.288722] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.289068] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.289894] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.289971] ACPI: \_SB_.PCI0: notify handler is installed [ 0.290032] Found 1 acpi root devices [ 0.290100] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.290385] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.290443] vgaarb: loaded [ 0.290477] vgaarb: bridge control possible 0000:00:02.0 [ 0.291184] SCSI subsystem initialized [ 0.291222] ACPI: bus type ATA registered [ 0.291371] libata version 3.00 loaded. [ 0.291433] ACPI: bus type USB registered [ 0.291513] usbcore: registered new interface driver usbfs [ 0.291576] usbcore: registered new interface driver hub [ 0.291668] usbcore: registered new device driver usb [ 0.292058] PCI: Using ACPI for IRQ routing [ 0.293768] PCI: pci_cache_line_size set to 64 bytes [ 0.293878] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.293881] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff] [ 0.293883] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.293885] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.294128] NetLabel: Initializing [ 0.294165] NetLabel: domain hash size = 128 [ 0.294201] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.294285] NetLabel: unlabeled traffic allowed by default [ 0.294413] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.294604] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.296666] Switched to clocksource hpet [ 0.314236] AppArmor: AppArmor Filesystem Enabled [ 0.314323] pnp: PnP ACPI init [ 0.314375] ACPI: bus type PNP registered [ 0.314823] pnp 00:00: [dma 4] [ 0.314865] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.314908] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.315074] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.315131] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.315208] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.315251] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.315292] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.315332] system 00:04: [io 0xffff] has been reserved [ 0.315372] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.315414] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.315454] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.315495] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.315534] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.315575] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.315617] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.315665] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.315758] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.315800] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.315860] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.315941] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.316248] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.316291] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.316333] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.316375] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.316417] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.316459] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.316501] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.316543] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.316586] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.316629] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.316683] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.317399] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.317437] pnp: PnP ACPI: found 11 devices [ 0.317474] ACPI: bus type PNP unregistered [ 0.325545] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.325590] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.325640] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.325680] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.325728] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.325789] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.325832] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.326302] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.326304] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.326306] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.326308] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.326310] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.326312] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.326314] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.326317] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.326319] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.326453] NET: Registered protocol family 2 [ 0.326862] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.327099] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.327420] TCP: Hash tables configured (established 32768 bind 32768) [ 0.327720] TCP: reno registered [ 0.327775] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.327878] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.328171] NET: Registered protocol family 1 [ 0.328227] pci 0000:00:02.0: Boot video device [ 0.329015] PCI: CLS 64 bytes, default 64 [ 0.329228] Trying to unpack rootfs image as initramfs... [ 0.404989] Freeing initrd memory: 3356K (ffff880037962000 - ffff880037ca9000) [ 0.405050] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.405092] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff] [ 0.405509] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 0.405557] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 0.405610] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 0.405662] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 0.405786] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 0.406345] Scanning for low memory corruption every 60 seconds [ 0.406980] Initialise module verification [ 0.407082] audit: initializing netlink socket (disabled) [ 0.407139] type=2000 audit(1375803128.396:1): initialized [ 0.437326] bounce pool size: 64 pages [ 0.437390] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.438115] VFS: Disk quotas dquot_6.5.2 [ 0.438194] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.439068] fuse init (API version 7.22) [ 0.439214] msgmni has been set to 7698 [ 0.439932] Key type asymmetric registered [ 0.439970] Asymmetric key parser 'x509' registered [ 0.440056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.440169] io scheduler noop registered [ 0.440207] io scheduler deadline registered (default) [ 0.440282] io scheduler cfq registered [ 0.440708] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.440787] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.440972] intel_idle: MWAIT substates: 0x21120 [ 0.440974] intel_idle: v0.4 model 0x2A [ 0.440975] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.441709] ACPI: AC Adapter [ADP1] (on-line) [ 0.442035] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.442305] ACPI: Lid Switch [LID0] [ 0.442414] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.442473] ACPI: Power Button [PWRB] [ 0.442574] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.442629] ACPI: Power Button [PWRF] [ 0.442765] ACPI: Fan [FAN0] (off) [ 0.442851] ACPI: Fan [FAN1] (off) [ 0.442934] ACPI: Fan [FAN2] (off) [ 0.443018] ACPI: Fan [FAN3] (off) [ 0.443104] ACPI: Fan [FAN4] (off) [ 0.443223] ACPI: Requesting acpi_cpufreq [ 0.446680] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.446722] ACPI: Thermal Zone [TZ00] (74 C) [ 0.447180] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.447220] ACPI: Thermal Zone [TZ01] (30 C) [ 0.447316] GHES: HEST is not enabled! [ 0.447571] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.453125] ACPI: Battery Slot [BAT1] (battery present) [ 0.453142] Linux agpgart interface v0.103 [ 0.455965] brd: module loaded [ 0.457310] loop: module loaded [ 0.457577] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.457625] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.460832] ahci 0000:00:1f.2: version 3.0 [ 0.460990] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.461210] ahci: SSS flag set, parallel bus scan disabled [ 0.476580] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.476638] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.476699] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.501532] scsi0 : ahci [ 0.501846] scsi1 : ahci [ 0.502089] scsi2 : ahci [ 0.502416] scsi3 : ahci [ 0.502696] scsi4 : ahci [ 0.503016] scsi5 : ahci [ 0.503144] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41 [ 0.503200] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41 [ 0.503253] ata3: DUMMY [ 0.503287] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41 [ 0.503341] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41 [ 0.503395] ata6: DUMMY [ 0.504280] libphy: Fixed MDIO Bus: probed [ 0.504606] tun: Universal TUN/TAP device driver, 1.6 [ 0.504644] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.504821] PPP generic driver version 2.4.2 [ 0.504987] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.505029] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.505037] ehci-pci: EHCI PCI platform driver [ 0.505265] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.505275] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.505320] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.505392] ehci-pci 0000:00:1a.0: debug port 2 [ 0.505432] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.505436] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.505476] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.509365] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.509367] ehci-pci 0000:00:1a.0: supports USB remote wakeup [ 0.509414] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000 [ 0.509456] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.520618] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.520738] usb usb1: default language 0x0409 [ 0.520752] usb usb1: udev 1, busnum 1, minor = 0 [ 0.520763] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.520803] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.520855] usb usb1: Product: EHCI Host Controller [ 0.520892] usb usb1: Manufacturer: Linux 3.11.0-rc4-next20130806-2-iniza-small ehci_hcd [ 0.520946] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.521230] usb usb1: usb_probe_device [ 0.521234] usb usb1: configuration #1 chosen from 1 choice [ 0.521246] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.521278] hub 1-0:1.0: usb_probe_interface [ 0.521280] hub 1-0:1.0: usb_probe_interface - got id [ 0.521282] hub 1-0:1.0: USB hub found [ 0.521327] hub 1-0:1.0: 2 ports detected [ 0.521363] hub 1-0:1.0: standalone hub [ 0.521364] hub 1-0:1.0: no power switching (usb 1.0) [ 0.521366] hub 1-0:1.0: individual port over-current protection [ 0.521368] hub 1-0:1.0: power on to power good time: 20ms [ 0.521374] hub 1-0:1.0: local power source is good [ 0.521430] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.521722] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.521729] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.521774] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.521845] ehci-pci 0000:00:1d.0: debug port 2 [ 0.521885] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.521889] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.521924] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.525802] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.525803] ehci-pci 0000:00:1d.0: supports USB remote wakeup [ 0.525847] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000 [ 0.525888] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.536628] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.536763] usb usb2: default language 0x0409 [ 0.536778] usb usb2: udev 1, busnum 2, minor = 128 [ 0.536788] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.536828] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.536881] usb usb2: Product: EHCI Host Controller [ 0.536918] usb usb2: Manufacturer: Linux 3.11.0-rc4-next20130806-2-iniza-small ehci_hcd [ 0.536970] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.537250] usb usb2: usb_probe_device [ 0.537254] usb usb2: configuration #1 chosen from 1 choice [ 0.537268] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.537299] hub 2-0:1.0: usb_probe_interface [ 0.537301] hub 2-0:1.0: usb_probe_interface - got id [ 0.537305] hub 2-0:1.0: USB hub found [ 0.537350] hub 2-0:1.0: 2 ports detected [ 0.537386] hub 2-0:1.0: standalone hub [ 0.537387] hub 2-0:1.0: no power switching (usb 1.0) [ 0.537389] hub 2-0:1.0: individual port over-current protection [ 0.537390] hub 2-0:1.0: power on to power good time: 20ms [ 0.537396] hub 2-0:1.0: local power source is good [ 0.537452] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.537537] ehci-platform: EHCI generic platform driver [ 0.537592] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.537632] ohci_hcd: block sizes: ed 80 td 96 [ 0.537641] ohci-pci: OHCI PCI platform driver [ 0.537697] ohci-platform: OHCI generic platform driver [ 0.537749] uhci_hcd: USB Universal Host Controller Interface driver [ 0.538048] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.538093] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 0.547855] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.547887] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.547894] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.547902] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.547908] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.547914] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.548166] usb usb3: default language 0x0409 [ 0.548177] usb usb3: udev 1, busnum 3, minor = 256 [ 0.548179] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.548219] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.548271] usb usb3: Product: xHCI Host Controller [ 0.548307] usb usb3: Manufacturer: Linux 3.11.0-rc4-next20130806-2-iniza-small xhci_hcd [ 0.548361] usb usb3: SerialNumber: 0000:03:00.0 [ 0.548594] usb usb3: usb_probe_device [ 0.548598] usb usb3: configuration #1 chosen from 1 choice [ 0.548602] xHCI xhci_add_endpoint called for root hub [ 0.548604] xHCI xhci_check_bandwidth called for root hub [ 0.548611] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.548639] hub 3-0:1.0: usb_probe_interface [ 0.548640] hub 3-0:1.0: usb_probe_interface - got id [ 0.548643] hub 3-0:1.0: USB hub found [ 0.548688] hub 3-0:1.0: 2 ports detected [ 0.548723] hub 3-0:1.0: standalone hub [ 0.548725] hub 3-0:1.0: no power switching (usb 1.0) [ 0.548726] hub 3-0:1.0: individual port over-current protection [ 0.548727] hub 3-0:1.0: Single TT [ 0.548729] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.548730] hub 3-0:1.0: power on to power good time: 20ms [ 0.548735] hub 3-0:1.0: local power source is good [ 0.548771] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.548831] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.548871] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.548932] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.548967] usb usb4: skipped 1 descriptor after endpoint [ 0.548972] usb usb4: default language 0x0409 [ 0.548982] usb usb4: udev 1, busnum 4, minor = 384 [ 0.548984] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.549023] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.549075] usb usb4: Product: xHCI Host Controller [ 0.549112] usb usb4: Manufacturer: Linux 3.11.0-rc4-next20130806-2-iniza-small xhci_hcd [ 0.549165] usb usb4: SerialNumber: 0000:03:00.0 [ 0.549369] usb usb4: usb_probe_device [ 0.549373] usb usb4: configuration #1 chosen from 1 choice [ 0.549377] xHCI xhci_add_endpoint called for root hub [ 0.549378] xHCI xhci_check_bandwidth called for root hub [ 0.549386] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.549416] hub 4-0:1.0: usb_probe_interface [ 0.549417] hub 4-0:1.0: usb_probe_interface - got id [ 0.549420] hub 4-0:1.0: USB hub found [ 0.549464] hub 4-0:1.0: 2 ports detected [ 0.549500] hub 4-0:1.0: standalone hub [ 0.549501] hub 4-0:1.0: no power switching (usb 1.0) [ 0.549502] hub 4-0:1.0: individual port over-current protection [ 0.549504] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.549505] hub 4-0:1.0: power on to power good time: 20ms [ 0.549510] hub 4-0:1.0: local power source is good [ 0.549544] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.560713] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.567008] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.567052] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.567483] mousedev: PS/2 mouse device common for all mice [ 0.568346] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.568423] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.568619] device-mapper: uevent: version 1.0.3 [ 0.568812] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxxxx [ 0.568873] Intel P-state driver initializing. [ 0.568925] Intel pstate controlling: cpu 0 [ 0.569006] Intel pstate controlling: cpu 1 [ 0.569075] Intel pstate controlling: cpu 2 [ 0.569138] Intel pstate controlling: cpu 3 [ 0.569251] ledtrig-cpu: registered to indicate activity on CPUs [ 0.569631] ashmem: initialized [ 0.569842] TCP: cubic registered [ 0.570004] NET: Registered protocol family 10 [ 0.570487] NET: Registered protocol family 17 [ 0.570541] Key type dns_resolver registered [ 0.571017] PM: Hibernation image not present or could not be loaded. [ 0.571023] Loading module verification certificates [ 0.572148] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 56671261271d3bec397cf8372bed0af9b01d383c' [ 0.572235] registered taskstats version 1 [ 0.574975] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.576144] Key type trusted registered [ 0.582911] Key type encrypted registered [ 0.590389] rtc_cmos 00:05: setting system clock to 2013-08-06 15:32:09 UTC (1375803129) [ 0.590960] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.591007] EDD information not available. [ 0.620555] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.620569] hub 1-0:1.0: port 1: status 0501 change 0001 [ 0.636568] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.636588] hub 2-0:1.0: port 1: status 0501 change 0001 [ 0.648598] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.648632] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.648660] hub 3-0:1.0: hub_suspend [ 0.648674] usb usb3: bus auto-suspend, wakeup 1 [ 0.648728] hub 4-0:1.0: hub_suspend [ 0.648735] usb usb4: bus auto-suspend, wakeup 1 [ 0.657543] usb usb4: usb wakeup-resume [ 0.657557] usb usb4: usb auto-resume [ 0.668536] hub 4-0:1.0: hub_resume [ 0.668566] hub 4-0:1.0: port 1: status 0203 change 0001 [ 0.720525] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.720568] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 0.776674] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.776687] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.820429] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.821715] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.821794] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.823234] ata1.00: configured for UDMA/133 [ 0.823759] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.824450] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.824550] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.824616] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.825142] sd 0:0:0:0: [sda] Write Protect is off [ 0.825214] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.825451] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.832389] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.835000] sda: sda1 sda2 sda3 [ 0.836582] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.888593] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.888609] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.965036] usb 1-1: udev 2, busnum 1, minor = 1 [ 0.965047] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.965122] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.965549] usb 1-1: usb_probe_device [ 0.965558] usb 1-1: configuration #1 chosen from 1 choice [ 0.965791] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 0.965875] hub 1-1:1.0: usb_probe_interface [ 0.965881] hub 1-1:1.0: usb_probe_interface - got id [ 0.965888] hub 1-1:1.0: USB hub found [ 0.966121] hub 1-1:1.0: 6 ports detected [ 0.966192] hub 1-1:1.0: standalone hub [ 0.966197] hub 1-1:1.0: individual port power switching [ 0.966201] hub 1-1:1.0: individual port over-current protection [ 0.966204] hub 1-1:1.0: Single TT [ 0.966209] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.966212] hub 1-1:1.0: power on to power good time: 100ms [ 0.966474] hub 1-1:1.0: local power source is good [ 0.966927] hub 1-1:1.0: enabling power on all ports [ 0.968285] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.968304] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.024497] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.024513] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.065194] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.080216] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.136419] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.136434] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.144210] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.144873] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.144952] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.145699] ata2.00: configured for UDMA/133 [ 1.146300] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.146922] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.147036] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.147232] sd 1:0:0:0: [sdb] Write Protect is off [ 1.147313] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.147408] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.148655] sdb: sdb1 sdb2 [ 1.149812] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.164185] usb 1-1: link qh256-0001/ffff880037a169c0 start 1 [1/0 us] [ 1.212588] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.212598] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.212673] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.213093] usb 2-1: usb_probe_device [ 1.213103] usb 2-1: configuration #1 chosen from 1 choice [ 1.213358] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.213449] hub 2-1:1.0: usb_probe_interface [ 1.213455] hub 2-1:1.0: usb_probe_interface - got id [ 1.213463] hub 2-1:1.0: USB hub found [ 1.213694] hub 2-1:1.0: 6 ports detected [ 1.213765] hub 2-1:1.0: standalone hub [ 1.213770] hub 2-1:1.0: individual port power switching [ 1.213774] hub 2-1:1.0: individual port over-current protection [ 1.213777] hub 2-1:1.0: Single TT [ 1.213781] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.213785] hub 2-1:1.0: power on to power good time: 100ms [ 1.214047] hub 2-1:1.0: local power source is good [ 1.214592] hub 2-1:1.0: enabling power on all ports [ 1.215863] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.215887] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s [ 1.313036] hub 2-1:1.0: port 4: status 0101 change 0001 [ 1.313533] hub 2-1:1.0: port 5: status 0101 change 0001 [ 1.331651] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.344661] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1.345120] usb 4-1: skipped 1 descriptor after endpoint [ 1.345129] usb 4-1: skipped 1 descriptor after endpoint [ 1.345279] usb 4-1: default language 0x0409 [ 1.345708] usb 4-1: udev 2, busnum 4, minor = 385 [ 1.345717] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa [ 1.345793] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.345865] usb 4-1: Product: MEDION HDDrive-n-GO [ 1.345932] usb 4-1: Manufacturer: MEDION [ 1.345997] usb 4-1: SerialNumber: 3180000000000000092C [ 1.346435] usb 4-1: usb_probe_device [ 1.346444] usb 4-1: configuration #1 chosen from 1 choice [ 1.347638] usb 4-1: Successful Endpoint Configure command [ 1.347756] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 1.348056] hub 1-1:1.0: state 7 ports 6 chg 0010 evt 0000 [ 1.348237] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.404008] tsc: Refined TSC clocksource calibration: 1596.373 MHz [ 1.412014] usb 2-1: link qh256-0001/ffff880037a4b6c0 start 1 [1/0 us] [ 1.420195] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 1.463970] ata4: SATA link down (SStatus 0 SControl 300) [ 1.657844] usb 1-1.4: skipped 1 descriptor after configuration [ 1.657856] usb 1-1.4: skipped 5 descriptors after interface [ 1.657863] usb 1-1.4: skipped 1 descriptor after endpoint [ 1.657868] usb 1-1.4: skipped 23 descriptors after interface [ 1.660051] usb 1-1.4: default language 0x0409 [ 1.672328] usb 1-1.4: udev 3, busnum 1, minor = 2 [ 1.672339] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.672414] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.672501] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.672567] usb 1-1.4: Manufacturer: 123 [ 1.672950] usb 1-1.4: usb_probe_device [ 1.672956] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.673094] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 1.783742] ata5: SATA link down (SStatus 0 SControl 300) [ 1.786460] Freeing unused kernel memory: 1332K (ffffffff81d07000 - ffffffff81e54000) [ 1.786545] Write protecting the kernel read-only data: 12288k [ 1.791935] Freeing unused kernel memory: 1052K (ffff8800016f9000 - ffff880001800000) [ 1.796621] Freeing unused kernel memory: 956K (ffff880001b11000 - ffff880001c00000) [ 1.835364] udevd[121]: starting version 175 [ 1.845156] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) [ 1.845299] hub 2-1:1.0: state 7 ports 6 chg 0030 evt 0000 [ 1.845424] hub 2-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.915643] usb 2-1.4: new low-speed USB device number 3 using ehci-pci [ 1.948953] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.949043] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.949423] r8169 0000:02:00.0: irq 47 for MSI/MSI-X [ 1.950172] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47 [ 1.950241] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.997744] usb-storage 4-1:1.0: usb_probe_interface [ 1.997752] usb-storage 4-1:1.0: usb_probe_interface - got id [ 1.997756] usb-storage 4-1:1.0: USB Mass Storage device detected [ 1.997942] scsi6 : usb-storage 4-1:1.0 [ 1.998199] usbcore: registered new interface driver usb-storage [ 2.010554] usb 2-1.4: skipped 1 descriptor after interface [ 2.010924] usb 2-1.4: default language 0x0409 [ 2.013678] usb 2-1.4: udev 3, busnum 2, minor = 130 [ 2.013683] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c00e [ 2.013732] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.013791] usb 2-1.4: Product: USB-PS/2 Optical Mouse [ 2.013834] usb 2-1.4: Manufacturer: Logitech [ 2.014399] usb 2-1.4: usb_probe_device [ 2.014403] usb 2-1.4: configuration #1 chosen from 1 choice [ 2.014814] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0) [ 2.015047] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 2.051313] hidraw: raw HID events driver (C) Jiri Kosina [ 2.053671] usbhid 2-1.4:1.0: usb_probe_interface [ 2.053676] usbhid 2-1.4:1.0: usb_probe_interface - got id [ 2.056347] usbcore: registered new interface driver usbhid [ 2.056388] usbhid: USB HID core driver [ 2.060579] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input4 [ 2.060968] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.4/input0 [ 2.083649] usb 2-1.5: new full-speed USB device number 4 using ehci-pci [ 2.180222] usb 2-1.5: udev 4, busnum 2, minor = 131 [ 2.180232] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 2.180307] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.180678] usb 2-1.5: usb_probe_device [ 2.180684] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.181272] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 2.181595] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) [ 2.181969] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 2.403370] Switched to clocksource tsc [ 2.986311] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 2.995517] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 2.996549] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.996617] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.997096] sd 6:0:0:0: [sdc] Write Protect is off [ 2.997173] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2.997627] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.999824] sdc: sdc1 sdc2 sdc3 [ 3.003157] sd 6:0:0:0: [sdc] Attached SCSI disk [ 14.834622] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS [ 14.856177] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 14.887847] udevd[624]: starting version 175 [ 15.129389] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130626/utaddress-251) [ 15.129399] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.129405] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 15.129411] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.129413] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 15.129417] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.129419] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 15.129424] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.129426] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 15.436906] lp: driver loaded but no devices found [ 15.524491] type=1400 audit(1375795944.442:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=709 comm="apparmor_parser" [ 15.525716] type=1400 audit(1375795944.442:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=709 comm="apparmor_parser" [ 15.526439] type=1400 audit(1375795944.442:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=827 comm="apparmor_parser" [ 15.526490] type=1400 audit(1375795944.442:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=709 comm="apparmor_parser" [ 15.527325] type=1400 audit(1375795944.442:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=827 comm="apparmor_parser" [ 15.527910] type=1400 audit(1375795944.442:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=827 comm="apparmor_parser" [ 15.602498] wmi: Mapper loaded [ 15.603270] samsung_laptop: detected SABI interface: SwSmi@ [ 15.603274] samsung_laptop: Backlight controlled by ACPI video driver [ 15.898966] Bluetooth: Core ver 2.16 [ 15.899007] NET: Registered protocol family 31 [ 15.899009] Bluetooth: HCI device and connection manager initialized [ 15.899025] Bluetooth: HCI socket layer initialized [ 15.899037] Bluetooth: L2CAP socket layer initialized [ 15.899052] Bluetooth: SCO socket layer initialized [ 15.913290] cfg80211: Calling CRDA to update world regulatory domain [ 15.921594] cfg80211: World regulatory domain updated: [ 15.921612] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.921616] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.921619] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.921621] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.921624] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.921626] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.029041] Linux video capture interface: v2.00 [ 16.067835] btusb 2-1.5:1.0: usb_probe_interface [ 16.067842] btusb 2-1.5:1.0: usb_probe_interface - got id [ 16.068610] usbcore: registered new interface driver btusb [ 16.068998] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.177920] [drm] Initialized drm 1.1.0 20060810 [ 16.196409] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.198658] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.198666] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.201411] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.203625] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.203631] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.206409] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.208621] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.208627] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.211395] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.213502] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.213509] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.216392] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.218600] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.218604] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.221387] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.225464] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.225467] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.228382] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.230589] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.230592] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.233375] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.235582] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.235584] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.238371] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.240576] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.240578] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.243370] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.245471] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.245473] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.248364] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.250574] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.250576] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.253360] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.255568] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.255571] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.258361] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.260571] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.260574] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.263355] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.265564] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.265566] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.268349] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.270559] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.270562] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.273436] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.275641] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.275643] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.278344] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.280549] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.280551] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.283343] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.285551] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.285555] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.288335] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.290540] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.290543] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.293334] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.295540] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.295542] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.298332] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.300537] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.300539] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.303329] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.305537] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.305540] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.308320] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.310525] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.310527] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.313320] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.315525] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.315527] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.318318] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.320527] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.320530] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.323310] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.325515] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.325517] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.328339] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.330550] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.330555] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.333346] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.335561] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.335565] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.338317] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.340597] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.340600] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.343311] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.345440] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.345442] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.348302] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.350579] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.350583] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.353306] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.355581] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.355584] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.358299] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.360573] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.360577] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.363300] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.365580] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.365584] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.368294] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.370572] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.370576] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.373289] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.375564] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.375567] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.378290] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.380564] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.380568] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.383283] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.385557] ehci-pci 0000:00:1d.0: reused qh ffff8800d57838c0 schedule [ 16.385561] usb 2-1.5: link qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.388112] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 16.388288] usb 2-1.5: unlink qh1-0e01/ffff8800d57838c0 start 0 [1/2 us] [ 16.388405] hub 2-1:1.0: port 5, status 0100, change 0001, 12 Mb/s [ 16.388414] usb 2-1.5: USB disconnect, device number 4 [ 16.388419] usb 2-1.5: unregistering device [ 16.388424] usb 2-1.5: unregistering interface 2-1.5:1.0 [ 16.388539] ehci-pci 0000:00:1d.0: shutdown urb ffff8800d509ba80 ep1in-intr [ 16.390787] usb 2-1.5: unregistering interface 2-1.5:1.1 [ 16.390860] usb 2-1.5: usb_disable_device nuking all URBs [ 16.433135] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 16.433139] Copyright(c) 2003-2013 Intel Corporation [ 16.433379] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 16.433641] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 16.438410] init: failsafe main process (987) killed by TERM signal [ 16.459521] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 16.517302] hub 2-1:1.0: debounce: port 5: total 100ms stable 100ms status 0x100 [ 16.654130] uvcvideo 1-1.4:1.0: usb_probe_interface [ 16.654138] uvcvideo 1-1.4:1.0: usb_probe_interface - got id [ 16.654194] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 16.673606] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5 [ 16.673895] usbcore: registered new interface driver uvcvideo [ 16.673899] USB Video Class driver (1.1.1) [ 16.680401] usb 1-1.4: link qh16-0001/ffff8800d512cd40 start 2 [1/0 us] [ 16.680474] usb 1-1.4: unlink qh16-0001/ffff8800d512cd40 start 2 [1/0 us] [ 16.724301] type=1400 audit(1375795945.638:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1109 comm="apparmor_parser" [ 16.724892] type=1400 audit(1375795945.638:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1109 comm="apparmor_parser" [ 16.725269] type=1400 audit(1375795945.642:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1109 comm="apparmor_parser" [ 16.800885] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 16.815829] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 16.890898] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 17.009807] ppdev: user-space parallel port driver [ 17.034044] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.034049] Bluetooth: BNEP filters: protocol multicast [ 17.034068] Bluetooth: BNEP socket layer initialized [ 17.044961] Bluetooth: RFCOMM TTY layer initialized [ 17.044981] Bluetooth: RFCOMM socket layer initialized [ 17.044982] Bluetooth: RFCOMM ver 1.11 [ 17.076298] type=1400 audit(1375795945.990:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1108 comm="apparmor_parser" [ 17.099613] [drm] Memory usable by graphics device = 2048M [ 17.099626] i915 0000:00:02.0: setting latency timer to 64 [ 17.138186] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 17.138201] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 17.138203] [drm] Driver supports precise vblank timestamp query. [ 17.138382] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 17.148745] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 17.148749] [drm] This can cause pipe underruns and display issues. [ 17.148751] [drm] Please upgrade your BIOS to fix this. [ 17.167219] fbcon: inteldrmfb (fb0) is primary device [ 17.333820] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 17.333822] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 17.333823] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 17.333825] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 17.333966] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 17.368537] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 17.381347] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 17.388124] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 17.671009] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 17.677665] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 17.763671] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.134957] Console: switching to colour frame buffer device 170x48 [ 18.137580] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 18.137581] i915 0000:00:02.0: registered panic notifier [ 18.156009] acpi device:33: registered as cooling_device9 [ 18.156505] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 18.157459] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 18.159002] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.159661] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 18.204252] init: alsa-restore main process (1195) terminated with status 19 [ 18.214050] usb 2-1.4: link qh8-0e01/ffff8800a685d840 start 3 [1/2 us] [ 18.233429] usb 2-1.4: unlink qh8-0e01/ffff8800a685d840 start 3 [1/2 us] [ 18.247725] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 18.248164] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 18.248525] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 18.799683] usb 1-1.4: usb auto-suspend, wakeup 0 [ 18.812055] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 18.815620] hub 1-1:1.0: hub_suspend [ 18.815634] usb 1-1: unlink qh256-0001/ffff880037a169c0 start 1 [1/0 us] [ 18.817970] usb 1-1: usb auto-suspend, wakeup 1 [ 18.831626] hub 1-0:1.0: hub_suspend [ 18.831640] usb usb1: bus auto-suspend, wakeup 1 [ 18.831645] ehci-pci 0000:00:1a.0: suspend root hub [ 19.659672] ehci-pci 0000:00:1d.0: reused qh ffff8800a685d840 schedule [ 19.659680] usb 2-1.4: link qh8-0e01/ffff8800a685d840 start 3 [1/2 us] [ 23.985478] wlan0: authenticate with 00:04:0e:e4:00:3d [ 23.989807] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 23.991479] wlan0: authenticated [ 23.991643] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 23.991648] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 23.991897] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 23.996238] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 24.000778] wlan0: associated [ 24.000921] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 26.821528] usb usb3: usb auto-resume [ 26.821549] hub 3-0:1.0: hub_resume [ 26.821578] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 26.821596] hub 3-0:1.0: hub_suspend [ 26.821604] usb usb3: bus auto-suspend, wakeup 1 [ 26.821626] usb usb3: usb auto-resume [ 26.829922] hub 3-0:1.0: hub_resume [ 26.829952] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 26.829966] hub 3-0:1.0: hub_suspend [ 26.829973] usb usb3: bus auto-suspend, wakeup 1 [ 26.830210] usb usb1: usb auto-resume [ 26.830216] ehci-pci 0000:00:1a.0: resume root hub [ 26.830228] hub 1-0:1.0: hub_resume [ 26.830235] hub 1-0:1.0: port 1: status 0507 change 0000 [ 26.830249] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 26.830252] usb 1-1: usb auto-resume [ 26.833910] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 26.861869] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 26.861893] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 26.877893] usb 1-1: finish resume [ 26.878155] hub 1-1:1.0: hub_resume [ 26.878793] hub 1-1:1.0: port 4: status 0507 change 0000 [ 26.879042] ehci-pci 0000:00:1a.0: reused qh ffff880037a169c0 schedule [ 26.879047] usb 1-1: link qh256-0001/ffff880037a169c0 start 1 [1/0 us] [ 26.879066] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 26.879264] usb 1-1.4: usb auto-resume [ 26.926008] usb 1-1.4: finish resume [ 27.063442] usb usb3: usb auto-resume [ 27.063470] hub 3-0:1.0: hub_resume [ 27.063510] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.063593] hub 3-0:1.0: hub_suspend [ 27.063604] usb usb3: bus auto-suspend, wakeup 1 [ 27.063686] usb usb3: usb auto-resume [ 27.073761] hub 3-0:1.0: hub_resume [ 27.073831] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.073862] hub 3-0:1.0: hub_suspend [ 27.073870] usb usb3: bus auto-suspend, wakeup 1 [ 27.089999] usb usb3: usb auto-resume [ 27.090026] hub 3-0:1.0: hub_resume [ 27.090086] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.090105] hub 3-0:1.0: hub_suspend [ 27.090112] usb usb3: bus auto-suspend, wakeup 1 [ 27.090139] usb usb3: usb auto-resume [ 27.101772] hub 3-0:1.0: hub_resume [ 27.101838] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.101860] hub 3-0:1.0: hub_suspend [ 27.101867] usb usb3: bus auto-suspend, wakeup 1 [ 27.137884] usb usb3: usb auto-resume [ 27.137911] hub 3-0:1.0: hub_resume [ 27.137980] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.138001] hub 3-0:1.0: hub_suspend [ 27.138008] usb usb3: bus auto-suspend, wakeup 1 [ 27.138047] usb usb3: usb auto-resume [ 27.149712] hub 3-0:1.0: hub_resume [ 27.149781] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.149801] hub 3-0:1.0: hub_suspend [ 27.149808] usb usb3: bus auto-suspend, wakeup 1 [ 27.189437] usb usb3: usb auto-resume [ 27.189461] hub 3-0:1.0: hub_resume [ 27.189487] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.189507] hub 3-0:1.0: hub_suspend [ 27.189513] usb usb3: bus auto-suspend, wakeup 1 [ 27.189562] usb usb3: usb auto-resume [ 27.197698] hub 3-0:1.0: hub_resume [ 27.197727] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.197738] hub 3-0:1.0: hub_suspend [ 27.197746] usb usb3: bus auto-suspend, wakeup 1 [ 27.220129] usb usb3: usb auto-resume [ 27.220155] hub 3-0:1.0: hub_resume [ 27.220180] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.220202] hub 3-0:1.0: hub_suspend [ 27.220209] usb usb3: bus auto-suspend, wakeup 1 [ 27.220257] usb usb3: usb auto-resume [ 27.229618] hub 3-0:1.0: hub_resume [ 27.229641] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.229650] hub 3-0:1.0: hub_suspend [ 27.229657] usb usb3: bus auto-suspend, wakeup 1 [ 27.290431] usb usb3: usb auto-resume [ 27.290458] hub 3-0:1.0: hub_resume [ 27.290524] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.290540] hub 3-0:1.0: hub_suspend [ 27.290547] usb usb3: bus auto-suspend, wakeup 1 [ 27.290575] usb usb3: usb auto-resume [ 27.301620] hub 3-0:1.0: hub_resume [ 27.301658] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.301692] hub 3-0:1.0: hub_suspend [ 27.301699] usb usb3: bus auto-suspend, wakeup 1 [ 27.391347] usb usb3: usb auto-resume [ 27.391375] hub 3-0:1.0: hub_resume [ 27.391446] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.391463] hub 3-0:1.0: hub_suspend [ 27.391470] usb usb3: bus auto-suspend, wakeup 1 [ 27.391499] usb usb3: usb auto-resume [ 27.401508] hub 3-0:1.0: hub_resume [ 27.401540] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.401564] hub 3-0:1.0: hub_suspend [ 27.401573] usb usb3: bus auto-suspend, wakeup 1 [ 27.409817] usb usb3: usb auto-resume [ 27.421481] hub 3-0:1.0: hub_resume [ 27.421509] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.421528] hub 3-0:1.0: hub_suspend [ 27.421534] usb usb3: bus auto-suspend, wakeup 1 [ 27.421589] usb usb3: usb auto-resume [ 27.433476] hub 3-0:1.0: hub_resume [ 27.433505] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.433536] hub 3-0:1.0: hub_suspend [ 27.433544] usb usb3: bus auto-suspend, wakeup 1 [ 27.832022] usb usb3: usb auto-resume [ 27.832051] hub 3-0:1.0: hub_resume [ 27.832087] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.832099] hub 3-0:1.0: hub_suspend [ 27.832108] usb usb3: bus auto-suspend, wakeup 1 [ 27.832207] usb usb3: usb auto-resume [ 27.841210] hub 3-0:1.0: hub_resume [ 27.841236] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.841256] hub 3-0:1.0: hub_suspend [ 27.841262] usb usb3: bus auto-suspend, wakeup 1 [ 27.946910] usb usb3: usb auto-resume [ 27.946937] hub 3-0:1.0: hub_resume [ 27.946969] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.946992] hub 3-0:1.0: hub_suspend [ 27.947000] usb usb3: bus auto-suspend, wakeup 1 [ 27.947079] usb usb3: usb auto-resume [ 27.957151] hub 3-0:1.0: hub_resume [ 27.957193] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.957215] hub 3-0:1.0: hub_suspend [ 27.957226] usb usb3: bus auto-suspend, wakeup 1 [ 27.992248] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 28.002896] cfg80211: Calling CRDA to update world regulatory domain [ 28.009967] cfg80211: World regulatory domain updated: [ 28.009973] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 28.009976] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.009978] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.009980] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.009982] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.009984] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.974256] usb usb3: usb auto-resume [ 28.974281] hub 3-0:1.0: hub_resume [ 28.974307] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 28.974329] hub 3-0:1.0: hub_suspend [ 28.974335] usb usb3: bus auto-suspend, wakeup 1 [ 28.974385] usb usb3: usb auto-resume [ 28.984409] hub 3-0:1.0: hub_resume [ 28.984437] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 28.984453] hub 3-0:1.0: hub_suspend [ 28.984459] usb usb3: bus auto-suspend, wakeup 1 [ 28.988235] usb usb3: usb auto-resume [ 28.996476] hub 3-0:1.0: hub_resume [ 28.996533] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 28.996552] hub 3-0:1.0: hub_suspend [ 28.996560] usb usb3: bus auto-suspend, wakeup 1 [ 28.996594] usb usb3: usb auto-resume [ 29.008370] hub 3-0:1.0: hub_resume [ 29.008402] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.008417] hub 3-0:1.0: hub_suspend [ 29.008425] usb usb3: bus auto-suspend, wakeup 1 [ 29.015674] usb usb3: usb auto-resume [ 29.024472] hub 3-0:1.0: hub_resume [ 29.024528] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.024599] hub 3-0:1.0: hub_suspend [ 29.024611] usb usb3: bus auto-suspend, wakeup 1 [ 29.024702] usb usb3: usb auto-resume [ 29.036354] hub 3-0:1.0: hub_resume [ 29.036384] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.036402] hub 3-0:1.0: hub_suspend [ 29.036408] usb usb3: bus auto-suspend, wakeup 1 [ 29.124059] usb usb3: usb auto-resume [ 29.124085] hub 3-0:1.0: hub_resume [ 29.124117] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.124139] hub 3-0:1.0: hub_suspend [ 29.124147] usb usb3: bus auto-suspend, wakeup 1 [ 29.124173] usb usb3: usb auto-resume [ 29.132313] hub 3-0:1.0: hub_resume [ 29.132340] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.132351] hub 3-0:1.0: hub_suspend [ 29.132357] usb usb3: bus auto-suspend, wakeup 1 [ 29.133106] usb usb3: usb auto-resume [ 29.144319] hub 3-0:1.0: hub_resume [ 29.144397] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.144414] hub 3-0:1.0: hub_suspend [ 29.144420] usb usb3: bus auto-suspend, wakeup 1 [ 29.144475] usb usb3: usb auto-resume [ 29.156320] hub 3-0:1.0: hub_resume [ 29.156400] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.156428] hub 3-0:1.0: hub_suspend [ 29.156435] usb usb3: bus auto-suspend, wakeup 1 [ 29.174133] usb usb3: usb auto-resume [ 29.174160] hub 3-0:1.0: hub_resume [ 29.174223] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.174257] hub 3-0:1.0: hub_suspend [ 29.174264] usb usb3: bus auto-suspend, wakeup 1 [ 29.184077] usb usb3: usb auto-resume [ 29.192290] hub 3-0:1.0: hub_resume [ 29.192329] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.192346] hub 3-0:1.0: hub_suspend [ 29.192357] usb usb3: bus auto-suspend, wakeup 1 [ 29.192440] usb usb3: usb auto-resume [ 29.204240] hub 3-0:1.0: hub_resume [ 29.204273] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.204286] hub 3-0:1.0: hub_suspend [ 29.204294] usb usb3: bus auto-suspend, wakeup 1 [ 29.273886] usb usb3: usb auto-resume [ 29.273911] hub 3-0:1.0: hub_resume [ 29.273970] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.273979] hub 3-0:1.0: hub_suspend [ 29.273984] usb usb3: bus auto-suspend, wakeup 1 [ 29.287137] usb usb3: usb auto-resume [ 29.287161] hub 3-0:1.0: hub_resume [ 29.287186] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.287208] hub 3-0:1.0: hub_suspend [ 29.287214] usb usb3: bus auto-suspend, wakeup 1 [ 29.287238] usb usb3: usb auto-resume [ 29.296243] hub 3-0:1.0: hub_resume [ 29.296276] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.296285] hub 3-0:1.0: hub_suspend [ 29.296291] usb usb3: bus auto-suspend, wakeup 1 [ 29.297368] usb usb3: usb auto-resume [ 29.308167] hub 3-0:1.0: hub_resume [ 29.308206] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.308236] hub 3-0:1.0: hub_suspend [ 29.308243] usb usb3: bus auto-suspend, wakeup 1 [ 29.308320] usb usb3: usb auto-resume [ 29.320161] hub 3-0:1.0: hub_resume [ 29.320195] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.320207] hub 3-0:1.0: hub_suspend [ 29.320215] usb usb3: bus auto-suspend, wakeup 1 [ 29.376811] usb usb3: usb auto-resume [ 29.376837] hub 3-0:1.0: hub_resume [ 29.376892] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.376910] hub 3-0:1.0: hub_suspend [ 29.376916] usb usb3: bus auto-suspend, wakeup 1 [ 29.376942] usb usb3: usb auto-resume [ 29.388217] hub 3-0:1.0: hub_resume [ 29.388307] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.388334] hub 3-0:1.0: hub_suspend [ 29.388344] usb usb3: bus auto-suspend, wakeup 1 [ 29.390810] usb usb3: usb auto-resume [ 29.400150] hub 3-0:1.0: hub_resume [ 29.400207] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.400237] hub 3-0:1.0: hub_suspend [ 29.400244] usb usb3: bus auto-suspend, wakeup 1 [ 29.400315] usb usb3: usb auto-resume [ 29.412094] hub 3-0:1.0: hub_resume [ 29.412164] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.412182] hub 3-0:1.0: hub_suspend [ 29.412189] usb usb3: bus auto-suspend, wakeup 1 [ 29.414311] usb usb3: usb auto-resume [ 29.424165] hub 3-0:1.0: hub_resume [ 29.424197] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.424225] hub 3-0:1.0: hub_suspend [ 29.424231] usb usb3: bus auto-suspend, wakeup 1 [ 29.424293] usb usb3: usb auto-resume [ 29.436111] hub 3-0:1.0: hub_resume [ 29.436175] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.436195] hub 3-0:1.0: hub_suspend [ 29.436202] usb usb3: bus auto-suspend, wakeup 1 [ 29.446019] usb usb3: usb auto-resume [ 29.456113] hub 3-0:1.0: hub_resume [ 29.456211] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.456241] hub 3-0:1.0: hub_suspend [ 29.456248] usb usb3: bus auto-suspend, wakeup 1 [ 29.456280] usb usb3: usb auto-resume [ 29.468101] hub 3-0:1.0: hub_resume [ 29.468171] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.468192] hub 3-0:1.0: hub_suspend [ 29.468199] usb usb3: bus auto-suspend, wakeup 1 [ 29.480774] usb usb3: usb auto-resume [ 29.480802] hub 3-0:1.0: hub_resume [ 29.480863] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.480892] hub 3-0:1.0: hub_suspend [ 29.480899] usb usb3: bus auto-suspend, wakeup 1 [ 29.544665] usb usb3: usb auto-resume [ 29.544693] hub 3-0:1.0: hub_resume [ 29.544730] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.544769] hub 3-0:1.0: hub_suspend [ 29.544777] usb usb3: bus auto-suspend, wakeup 1 [ 29.544800] usb usb3: usb auto-resume [ 29.556078] hub 3-0:1.0: hub_resume [ 29.556149] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.556169] hub 3-0:1.0: hub_suspend [ 29.556177] usb usb3: bus auto-suspend, wakeup 1 [ 29.561656] usb usb3: usb auto-resume [ 29.572089] hub 3-0:1.0: hub_resume [ 29.572156] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.572177] hub 3-0:1.0: hub_suspend [ 29.572185] usb usb3: bus auto-suspend, wakeup 1 [ 29.572213] usb usb3: usb auto-resume [ 29.584017] hub 3-0:1.0: hub_resume [ 29.584106] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.584130] hub 3-0:1.0: hub_suspend [ 29.584151] usb usb3: bus auto-suspend, wakeup 1 [ 29.589737] usb usb3: usb auto-resume [ 29.600024] hub 3-0:1.0: hub_resume [ 29.600091] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.600120] hub 3-0:1.0: hub_suspend [ 29.600153] usb usb3: bus auto-suspend, wakeup 1 [ 29.600235] usb usb3: usb auto-resume [ 29.611940] hub 3-0:1.0: hub_resume [ 29.612008] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.612029] hub 3-0:1.0: hub_suspend [ 29.612037] usb usb3: bus auto-suspend, wakeup 1 [ 29.631865] usb usb3: usb auto-resume [ 29.631929] hub 3-0:1.0: hub_resume [ 29.631985] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.632021] hub 3-0:1.0: hub_suspend [ 29.632031] usb usb3: bus auto-suspend, wakeup 1 [ 29.632113] usb usb3: usb auto-resume [ 29.643946] hub 3-0:1.0: hub_resume [ 29.643980] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.644006] hub 3-0:1.0: hub_suspend [ 29.644012] usb usb3: bus auto-suspend, wakeup 1 [ 29.660644] usb usb3: usb auto-resume [ 29.660671] hub 3-0:1.0: hub_resume [ 29.660704] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.660728] hub 3-0:1.0: hub_suspend [ 29.660735] usb usb3: bus auto-suspend, wakeup 1 [ 29.660791] usb usb3: usb auto-resume [ 29.671980] hub 3-0:1.0: hub_resume [ 29.672012] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.672023] hub 3-0:1.0: hub_suspend [ 29.672032] usb usb3: bus auto-suspend, wakeup 1 [ 29.684715] usb usb3: usb auto-resume [ 29.684742] hub 3-0:1.0: hub_resume [ 29.684772] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.684782] hub 3-0:1.0: hub_suspend [ 29.684789] usb usb3: bus auto-suspend, wakeup 1 [ 29.684845] usb usb3: usb auto-resume [ 29.695996] hub 3-0:1.0: hub_resume [ 29.696032] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.696046] hub 3-0:1.0: hub_suspend [ 29.696055] usb usb3: bus auto-suspend, wakeup 1 [ 30.803640] usb usb3: usb auto-resume [ 30.803665] hub 3-0:1.0: hub_resume [ 30.803696] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.803717] hub 3-0:1.0: hub_suspend [ 30.803724] usb usb3: bus auto-suspend, wakeup 1 [ 30.803778] usb usb3: usb auto-resume [ 30.815192] hub 3-0:1.0: hub_resume [ 30.815273] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.815296] hub 3-0:1.0: hub_suspend [ 30.815305] usb usb3: bus auto-suspend, wakeup 1 [ 30.820925] usb usb3: usb auto-resume [ 30.831220] hub 3-0:1.0: hub_resume [ 30.831308] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.831340] hub 3-0:1.0: hub_suspend [ 30.831349] usb usb3: bus auto-suspend, wakeup 1 [ 30.831376] usb usb3: usb auto-resume [ 30.843160] hub 3-0:1.0: hub_resume [ 30.843237] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.843260] hub 3-0:1.0: hub_suspend [ 30.843268] usb usb3: bus auto-suspend, wakeup 1 [ 30.869146] usb usb3: usb auto-resume [ 30.869171] hub 3-0:1.0: hub_resume [ 30.869231] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.869264] hub 3-0:1.0: hub_suspend [ 30.869270] usb usb3: bus auto-suspend, wakeup 1 [ 30.872100] usb usb3: usb auto-resume [ 30.883111] hub 3-0:1.0: hub_resume [ 30.883151] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.883194] hub 3-0:1.0: hub_suspend [ 30.883201] usb usb3: bus auto-suspend, wakeup 1 [ 30.883281] usb usb3: usb auto-resume [ 30.895133] hub 3-0:1.0: hub_resume [ 30.895209] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.895233] hub 3-0:1.0: hub_suspend [ 30.895242] usb usb3: bus auto-suspend, wakeup 1 [ 30.898833] usb usb3: usb auto-resume [ 30.907109] hub 3-0:1.0: hub_resume [ 30.907192] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.907217] hub 3-0:1.0: hub_suspend [ 30.907226] usb usb3: bus auto-suspend, wakeup 1 [ 30.907262] usb usb3: usb auto-resume [ 30.919124] hub 3-0:1.0: hub_resume [ 30.919204] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.919230] hub 3-0:1.0: hub_suspend [ 30.919239] usb usb3: bus auto-suspend, wakeup 1 [ 30.963782] usb usb3: usb auto-resume [ 30.963810] hub 3-0:1.0: hub_resume [ 30.963879] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.963918] hub 3-0:1.0: hub_suspend [ 30.963925] usb usb3: bus auto-suspend, wakeup 1 [ 30.978237] usb usb3: usb auto-resume [ 30.978262] hub 3-0:1.0: hub_resume [ 30.978324] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.978352] hub 3-0:1.0: hub_suspend [ 30.978358] usb usb3: bus auto-suspend, wakeup 1 [ 31.087624] usb usb3: usb auto-resume [ 31.087651] hub 3-0:1.0: hub_resume [ 31.087684] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.087714] hub 3-0:1.0: hub_suspend [ 31.087723] usb usb3: bus auto-suspend, wakeup 1 [ 31.087787] usb usb3: usb auto-resume [ 31.098979] hub 3-0:1.0: hub_resume [ 31.099031] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.099056] hub 3-0:1.0: hub_suspend [ 31.099068] usb usb3: bus auto-suspend, wakeup 1 [ 31.200272] wlan0: authenticate with 00:04:0e:e4:00:3d [ 31.203212] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 31.204978] wlan0: authenticated [ 31.205314] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 31.205320] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 31.206832] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 31.211341] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 31.218032] wlan0: associated [ 33.801529] usb 1-1.4: usb auto-suspend, wakeup 0 [ 33.817044] hub 1-1:1.0: hub_suspend [ 33.817059] usb 1-1: unlink qh256-0001/ffff880037a169c0 start 1 [1/0 us] [ 33.819353] usb 1-1: usb auto-suspend, wakeup 1 [ 33.832972] hub 1-0:1.0: hub_suspend [ 33.832986] usb usb1: bus auto-suspend, wakeup 1 [ 33.832991] ehci-pci 0000:00:1a.0: suspend root hub [ 35.207316] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 35.221860] cfg80211: Calling CRDA to update world regulatory domain [ 35.227694] cfg80211: World regulatory domain updated: [ 35.227698] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 35.227701] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 35.227703] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 35.227705] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 35.227706] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 35.227708] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 38.414442] wlan0: authenticate with 00:04:0e:e4:00:3d [ 38.417125] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 38.418867] wlan0: authenticated [ 38.419073] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 38.419078] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 38.421702] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 38.426380] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 38.429873] wlan0: associated [ 40.035294] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 40.058817] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 42.422528] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 42.444372] cfg80211: Calling CRDA to update world regulatory domain [ 42.449768] cfg80211: World regulatory domain updated: [ 42.449774] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 42.449777] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.449780] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 42.449782] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 42.449785] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.449787] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.653205] wlan0: authenticate with 00:04:0e:e4:00:3d [ 45.655851] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 45.657626] wlan0: authenticated [ 45.657827] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 45.657832] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 45.660556] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 45.664064] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 45.668306] wlan0: associated [ 49.657534] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 49.675986] cfg80211: Calling CRDA to update world regulatory domain [ 49.682969] cfg80211: World regulatory domain updated: [ 49.682974] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 49.682977] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 49.682979] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 49.682980] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 49.682982] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 49.682983] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 52.894287] wlan0: authenticate with 00:04:0e:e4:00:3d [ 52.896007] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 52.897793] wlan0: authenticated [ 52.898024] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 52.898030] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 52.899440] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 52.902970] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 52.908724] wlan0: associated [ 56.893533] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 56.906475] cfg80211: Calling CRDA to update world regulatory domain [ 56.915505] cfg80211: World regulatory domain updated: [ 56.915512] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 56.915517] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 56.915521] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 56.915524] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 56.915527] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 56.915531] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 60.108843] wlan0: authenticate with 00:04:0e:e4:00:3d [ 60.111569] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 60.113306] wlan0: authenticated [ 60.113532] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 60.113536] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 60.114313] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 60.117869] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 60.121903] wlan0: associated [ 64.107929] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 64.121751] cfg80211: Calling CRDA to update world regulatory domain [ 64.127771] cfg80211: World regulatory domain updated: [ 64.127777] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 64.127780] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 64.127783] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 64.127785] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 64.127788] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 64.127789] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 67.323270] wlan0: authenticate with 00:04:0e:e4:00:3d [ 67.326516] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 67.328250] wlan0: authenticated [ 67.328528] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 67.328535] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 67.329236] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 67.332951] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 67.338939] wlan0: associated [ 71.323075] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 71.336364] cfg80211: Calling CRDA to update world regulatory domain [ 71.342961] cfg80211: World regulatory domain updated: [ 71.342967] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 71.342969] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 71.342972] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 71.342973] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 71.342975] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 71.342977] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 74.537136] wlan0: authenticate with 00:04:0e:e4:00:3d [ 74.540070] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 74.541890] wlan0: authenticated [ 74.542205] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 74.542212] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 74.544175] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 74.547990] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 74.553228] wlan0: associated [ 78.538033] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 78.554842] cfg80211: Calling CRDA to update world regulatory domain [ 78.561187] cfg80211: World regulatory domain updated: [ 78.561191] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 78.561194] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 78.561196] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 78.561198] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 78.561199] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 78.561200] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.761724] wlan0: authenticate with 00:04:0e:e4:00:3d [ 88.764908] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 88.766621] wlan0: authenticated [ 88.766816] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 88.766821] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 88.770113] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 88.773742] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 88.777665] wlan0: associated [ 92.769182] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 92.781460] cfg80211: Calling CRDA to update world regulatory domain [ 92.788481] cfg80211: World regulatory domain updated: [ 92.788486] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 92.788489] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 92.788491] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 92.788493] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 92.788494] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 92.788496] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 95.975609] wlan0: authenticate with 00:04:0e:e4:00:3d [ 95.978572] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 95.980300] wlan0: authenticated [ 95.980639] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 95.980645] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 95.980918] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 95.985132] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 95.991537] wlan0: associated [ 99.983442] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 99.999549] cfg80211: Calling CRDA to update world regulatory domain [ 100.005968] cfg80211: World regulatory domain updated: [ 100.005974] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 100.005977] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 100.005980] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 100.005983] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 100.005985] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 100.005987] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 103.190094] wlan0: authenticate with 00:04:0e:e4:00:3d [ 103.192847] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 103.194700] wlan0: authenticated [ 103.194941] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 103.194949] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 103.196043] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 103.199959] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 103.204368] wlan0: associated [ 107.198576] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 107.210583] cfg80211: Calling CRDA to update world regulatory domain [ 107.217853] cfg80211: World regulatory domain updated: [ 107.217858] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 107.217861] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 107.217863] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 107.217865] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 107.217867] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 107.217868] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 110.404061] wlan0: authenticate with 00:04:0e:e4:00:3d [ 110.406564] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 110.408369] wlan0: authenticated [ 110.408562] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 110.408566] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 110.410836] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 110.414373] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 110.418610] wlan0: associated [ 114.413914] wlan0: deauthenticated from 00:04:0e:e4:00:3d (Reason: 1) [ 114.429846] cfg80211: Calling CRDA to update world regulatory domain [ 114.435821] cfg80211: World regulatory domain updated: [ 114.435827] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 114.435830] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 114.435833] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 114.435835] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 114.435837] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 114.435839] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 117.618885] wlan0: authenticate with 00:04:0e:e4:00:3d [ 117.621294] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 117.623280] wlan0: authenticated [ 117.623572] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 117.623579] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 117.625669] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 117.629400] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 117.636552] wlan0: associated [ 121.454318] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3) [ 121.460691] cfg80211: Calling CRDA to update world regulatory domain [ 121.470098] cfg80211: World regulatory domain updated: [ 121.470104] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 121.470108] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 121.470112] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 121.470115] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 121.470118] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 121.470121] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Attachment:
config-3.11.0-rc4-next20130806-2-iniza-small
Description: Binary data
