This implements a limited subset of what can be
reported in the survey dump.
This can be used for assessing approximate channel
load, e.g. for automatic channel selection.
Signed-off-by: Michal Kazior <michal.kazior@xxxxxxxxx>
---
v3:
* fix warning print format
* bail out on invalid frequency earlier
* use temp vars for improved readability
* document survey stats vars are protected by data_lock
* use FIXME: instead of XXX:
v2: Do not sum up channel time. Each time a
channel is visited stats for that channel are
overwritten. This makes the behaviour
more consistent with ath9k.
drivers/net/wireless/ath/ath10k/core.h | 7 +++
drivers/net/wireless/ath/ath10k/mac.c | 36 +++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 75 +++++++++++++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/wmi.h | 5 +++
4 files changed, 122 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index ff42bb7..e4bba56 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -38,6 +38,7 @@
#define ATH10K_SCAN_ID 0
#define WMI_READY_TIMEOUT (5 * HZ)
#define ATH10K_FLUSH_TIMEOUT_HZ (5*HZ)
+#define ATH10K_NUM_CHANS 38
/* Antenna noise floor */
#define ATH10K_DEFAULT_NOISE_FLOOR -95
@@ -375,6 +376,12 @@ struct ath10k {
struct work_struct restart_work;
+ /* cycle count is reported twice for each visited channel during scan.
+ * access protected by data_lock */
+ u32 survey_last_rx_clear_count;
+ u32 survey_last_cycle_count;
+ struct survey_info survey[ATH10K_NUM_CHANS];
+
#ifdef CONFIG_ATH10K_DEBUGFS
struct ath10k_debug debug;
#endif
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 344ad27..9598646 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2934,6 +2934,41 @@ static void ath10k_restart_complete(struct ieee80211_hw *hw)
mutex_unlock(&ar->conf_mutex);
}
+static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
+ struct survey_info *survey)
+{
+ struct ath10k *ar = hw->priv;
+ struct ieee80211_supported_band *sband;
+ struct survey_info *ar_survey = &ar->survey[idx];
+ int ret = 0;
+
+ mutex_lock(&ar->conf_mutex);
+
+ sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ];
+ if (sband && idx >= sband->n_channels) {
+ idx -= sband->n_channels;
+ sband = NULL;
+ }
+
+ if (!sband)
+ sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ];
+
+ if (!sband || idx >= sband->n_channels) {
+ ret = -ENOENT;
+ goto exit;
+ }
+
+ spin_lock_bh(&ar->data_lock);
+ memcpy(survey, ar_survey, sizeof(*survey));
+ spin_unlock_bh(&ar->data_lock);
+
+ survey->channel = &sband->channels[idx];
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
static const struct ieee80211_ops ath10k_ops = {
.tx = ath10k_tx,
.start = ath10k_start,
@@ -2955,6 +2990,7 @@ static const struct ieee80211_ops ath10k_ops = {
.flush = ath10k_flush,
.tx_last_beacon = ath10k_tx_last_beacon,
.restart_complete = ath10k_restart_complete,
+ .get_survey = ath10k_get_survey,
#ifdef CONFIG_PM
.suspend = ath10k_suspend,
.resume = ath10k_resume,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 1cbcb2e..55f90c7 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -390,9 +390,82 @@ static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
return 0;
}
+static int freq_to_idx(struct ath10k *ar, int freq)
+{
+ struct ieee80211_supported_band *sband;
+ int band, ch, idx = 0;
+
+ for (band = IEEE80211_BAND_2GHZ; band < IEEE80211_NUM_BANDS; band++) {
+ sband = ar->hw->wiphy->bands[band];
+ if (!sband)
+ continue;
+
+ for (ch = 0; ch < sband->n_channels; ch++, idx++)
+ if (sband->channels[ch].center_freq == freq)
+ goto exit;
+ }
+
+exit:
+ return idx;
+}
+
static void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb)
{
- ath10k_dbg(ATH10K_DBG_WMI, "WMI_CHAN_INFO_EVENTID\n");
+ struct wmi_chan_info_event *ev;
+ struct survey_info *survey;
+ u32 err_code, freq, cmd_flags, noise_floor, rx_clear_count, cycle_count;
+ int idx;
+
+ ev = (struct wmi_chan_info_event *)skb->data;
+
+ err_code = __le32_to_cpu(ev->err_code);
+ freq = __le32_to_cpu(ev->freq);
+ cmd_flags = __le32_to_cpu(ev->cmd_flags);
+ noise_floor = __le32_to_cpu(ev->noise_floor);
+ rx_clear_count = __le32_to_cpu(ev->rx_clear_count);
+ cycle_count = __le32_to_cpu(ev->cycle_count);
+
+ ath10k_dbg(ATH10K_DBG_WMI,
+ "chan info err_code %d freq %d cmd_flags %d noise_floor %d rx_clear_count %d cycle_count %d\n",
+ err_code, freq, cmd_flags, noise_floor, rx_clear_count,
+ cycle_count);
+
+ spin_lock_bh(&ar->data_lock);
+
+ if (!ar->scan.in_progress) {
+ ath10k_warn("chan info event without a scan request?\n");
+ goto exit;
+ }
+
+ idx = freq_to_idx(ar, freq);
+ if (idx >= ARRAY_SIZE(ar->survey)) {
+ ath10k_warn("chan info: invalid frequency %d (idx %d out of bounds)\n",
+ freq, idx);
+ goto exit;
+ }
+
+ if (cmd_flags & WMI_CHAN_INFO_FLAG_COMPLETE) {
+ /* During scanning chan info is reported twice for each
+ * visited channel. The reported cycle count is global
+ * and per-channel cycle count must be calculated */
+
+ cycle_count -= ar->survey_last_cycle_count;
+ rx_clear_count -= ar->survey_last_rx_clear_count;
+
+ survey = &ar->survey[idx];
+ survey->channel_time = WMI_CHAN_INFO_MSEC(cycle_count);
+ survey->channel_time_rx = WMI_CHAN_INFO_MSEC(rx_clear_count);
+ survey->noise = noise_floor;
+ survey->filled = SURVEY_INFO_CHANNEL_TIME |
+ SURVEY_INFO_CHANNEL_TIME_RX |
+ SURVEY_INFO_NOISE_DBM;
+ }
+
+ ar->survey_last_rx_clear_count = rx_clear_count;
+ ar->survey_last_cycle_count = cycle_count;
+
+exit:
+ spin_unlock_bh(&ar->data_lock);
}
static void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index da3b2bc..2c5a4f8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2931,6 +2931,11 @@ struct wmi_chan_info_event {
__le32 cycle_count;
} __packed;
+#define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
+
+/* FIXME: empirically extrapolated */
+#define WMI_CHAN_INFO_MSEC(x) ((x) / 76595)
+
/* Beacon filter wmi command info */
#define BCN_FLT_MAX_SUPPORTED_IES 256
#define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
