Hi, In v2: use IRQ_TYPE_LEVEL_HIGH when defining the interrupts, as suggested by Laurent. These patches add the necessary DT configuration to use the WLAN part of WiLink on OMAP4 Pandaboard and on OMAP4-SDP (including Blaze). I've tested these changes on Panda and it works fine. But I couldn't test the OMAP4 SDP changes properly on 3.11-rc3 because I'm having problems with clocks and SDIO stuff. So it's pretty much just compiled tested. I've tried this (without the new clock definition stuff) on Blaze with 3.10 and it was working, though. Please take a look and let me know what you think. Luca. Luciano Coelho (4): ARM: dts: omap4-panda: add MMC5 (WiLink WLAN) configuration arm: dts: omap4-panda-common: add WiLink6 device tree nodes ARM: dts: omap4-sdp: add MMC5 (WiLink WLAN) configuration arm: dts: omap4-sdp: add WiLink7 device tree node arch/arm/boot/dts/omap4-panda-common.dtsi | 46 +++++++++++++++++++++++++++- arch/arm/boot/dts/omap4-sdp.dts | 50 +++++++++++++++++++++++++++++++ 2 files changed, 95 insertions(+), 1 deletion(-) -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
