Add appropriate device tree node for Blaze's WiLink7 module. It uses
a GPIO as interrupt, so configure the gpio2 node as interrupt parent
and assign the corresponding GPIO. Additionally, add the clock
frequencies used by the module.
Signed-off-by: Luciano Coelho <coelho@xxxxxx>
---
arch/arm/boot/dts/omap4-sdp.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 3845615..2fecca1 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -150,6 +150,26 @@
startup-delay-us = <70000>;
enable-active-high;
};
+
+ wlan {
+ compatible = "ti,wilink7";
+ interrupt-parent = <&gpio2>;
+ interrupts = <21 0x4>; /* gpio line 53, high level triggered */
+ clocks = <&refclock &tcxoclock>;
+ clock-names = "refclock tcxoclock";
+
+ refclock: refclock {
+ compatible = "ti,wilink-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ tcxoclock: tcxoclock {
+ compatible = "ti,wilink-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+ };
};
&omap4_pmx_wkup {
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
