Add the WiLink device tree nodes. On omap4-panda, a WiLink6 module is
connected on MMC5 and a GPIO interrupt is used. The refclock
frequency is 38.4MHz.
Signed-off-by: Luciano Coelho <coelho@xxxxxx>
---
arch/arm/boot/dts/omap4-panda-common.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index b3f6e1f..77e4a42 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -117,6 +117,20 @@
startup-delay-us = <70000>;
enable-active-high;
};
+
+ wlan {
+ compatible = "ti,wilink6";
+ interrupt-parent = <&gpio2>;
+ interrupts = <21 0x4>; /* gpio line 53, high level triggered */
+ clocks = <&refclock>;
+ clock-names = "refclock";
+
+ refclock: refclock {
+ compatible = "ti,wilink-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
+ };
};
&omap4_pmx_wkup {
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
