Hello Sedat, > -----Message d'origine----- > De : Sedat Dilek [mailto:sedat.dilek@xxxxxxxxx] > Envoyé : samedi 13 juillet 2013 13:04 > À : Cedric GROSS > Cc : linux-wireless@xxxxxxxxxxxxxxx > Objet : Re: Firmware error for Centrino N 2230 > > On Sat, Jul 13, 2013 at 12:12 PM, Cedric GROSS <cg@xxxxxxxxxxx> wrote: > > Hello, > > > > I’m trying to adapt current freebsd driver for supporting my 2230 > NIC. > > > > I try to follow ucode command order defined in kernel 3.2 but I reach > > some difficulties because firmware raise error. > > > > Runtime uCode is alive. So far I sent calib result (cmd xB0), > > configured advanced BT coexistence (cmd x9B,xCC and xCD) running > > runtime calib (cmd > > x65) but the command configuring valid chain (cmd x65) failed as the > > result below : > > CSR values: (2nd byte of IWN_INT_COALESCING is IWN_INT_PERIODIC) > > IWN_HW_IF_CONFIG: 0x00800302 IWN_INT_COALESCING: 0x0000ff40 > > IWN_INT: 0x04000000 > > IWN_INT_MASK: 0x00000000 IWN_FH_INT: 0x00000000 IWN_GPIO_IN: > > 0x00000000 > > IWN_RESET: 0x00000000 IWN_GP_CNTRL: 0x080403c5 IWN_HW_REV: > 0x000000c8 > > IWN_EEPROM: 0x08450ffd IWN_EEPROM_GP: 0x90000801 IWN_OTP_GP: > > 0x00030001 > > IWN_GIO: 0x00080044 INW_GP_UCODE: 0x00000004 IWN_GP_DRIVER: > > 0x00000080 > > IWN_GP1_DRIVER: 0x00000000 IWN_UCODE_DRV_GP2: 0x00000000 > IWN_LED: > > 0x00000018 > > IWN_DRAM_INT_TBL: 0x880b76e5 IWN_GIO_CHICKEN: 0x29800200 > IWN_ANA_PLL: > > 0x00000000 > > IWN_HW_REV_WA: 0x0001001a IWN_DBG_HPET_MEM: 0xffff0000 > > firmware error log: > > error type = "UNKNOWN" (0x00001987) > > program counter = 0x000179B4 > > source line = 0x00000167 > > error data = 0x0000000000000000 > > branch link = 0x0001798200017982 > > interrupt link = 0x0000EC7A00000000 > > time = 46566 > > > > What I’m missing ? > > What is meaning of firmware error ? > > > > What distro? > If this is Debian or Ubuntu, this is not a vanilla but distro-patched > kernel-version. I'm working on freeBSD. So it's not a linux distro ;) > > Can you provide more infos? > Your kernel-config file, dmesg output, name of loaded firmware file, > etc. For firmware : iwlwifi-2030-18.168.6.1.fw For the rest, I can send you what you wish, but it's not a linux output. > > Did you check for newer firmware files (see [1])? > > Did you try a higher kernel-release? Doesn't apply ;) > > - Sedat - > > [1] http://wireless.kernel.org/en/users/Drivers/iwlwifi > > > Many thanks for your help. > > > > Best regards > > Cedric > > > > -- Thanks for help anyway. Cedric -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html