Set the Forwarding bit in Mesh Capability Info according to dot11MeshForwarding as defined in IEEE 802.11-2012 section 8.4.2.100.8. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@xxxxxxxxx> --- net/mac80211/mesh.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index e536f22..885a5f6 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -273,7 +273,9 @@ int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata, neighbors = min_t(int, neighbors, IEEE80211_MAX_MESH_PEERINGS); *pos++ = neighbors << 1; /* Mesh capability */ - *pos = IEEE80211_MESHCONF_CAPAB_FORWARDING; + *pos = 0x00; + *pos |= ifmsh->mshcfg.dot11MeshForwarding ? + IEEE80211_MESHCONF_CAPAB_FORWARDING : 0x00; *pos |= ifmsh->accepting_plinks ? IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */ -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
