On 10-07-2013 10:22, Luciano Coelho wrote:
Can my problems be related with an inadequate NVS file? I've generated
it with the calibrate tool from ti-utils and the INI file TQS_D_1.7.ini
with the command "calibrator plt calibrate". Is this the correct INI for
my module (Jorjin's WG7350 - wl1273 based)?
Yes, the problem can be because of a bad NVS file. Try with the
"default" NVS file that is provided in linux-firmware.git. That one
won't be optimal, but should work okay.
I have the same problems with the default NVS file.
I'm not sure which FEM Jorjin's module use. Can you ask them?
I will ask my contact.
I found this on github (Dick Chiang appears to work for Jorjin):
https://github.com/dickychiang/compat-wireless-r5/blob/master/jorjin/ini_files/TQS_D_1.7_WG7350_NLCP.ini
DISCLAIMER: I have no clue whether this is the correct INI file or not
and I'm not claiming it's associated with TI in any way, so use it at
your own risk.
Same problem after generating a new NVS file from this INI.
I will try a new AP to see how it behaves...
José Gonçalves
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
