Hi, This is a follow-up on a previous patch set that had a smaller audience. This time, I added the lists and people who were involved in the review of the bindings documentation, since most of my changes in v2 are coming from discussions there. This patch series adds device tree support to the wlcore_sdio driver, which is used by WiLink6, WiLink7 and WiLink8. The first patches do some clean-up to make the data needed in the wilink device tree node smaller. The remaining patches implement the actual device tree node parsing in wlcore_sdio. I still need to figure out how to add the information about whether the clocks are XTAL or not. I'll send it in a separate patche set. The DTS file changes will be sent separately, since they need to go via different trees. The bindings documentation patch will also be updated and sent separately, once the XTAL issue is solved. Tony has acked some of the patches that touch OMAP areas. I still need one more ack to a new patch I added (wl12xx: use frequency instead of enumerations for pdata clocks). Sekhar, can you please check the patches that touch the davinci board file and ack them? Changes in v2: * New clean-up patch (4/9); * Patch 6/9 (previously patch 5/5) now doesn't add the clock parsing, since it became more complicated and I added separate patches for that; * 3 new patches (from 7/9 till 9/9) to handle the clock reading in the device tree; Please review. -- Cheers, Luca. Luciano Coelho (9): wl1251: split wl251 platform data to a separate structure wlcore: use irq_flags in pdata instead of hiding it behind a quirk wlcore: remove pwr_in_suspend from platform data wl12xx: use frequency instead of enumerations for pdata clocks wlcore: always use one-shot IRQ wlcore: add initial device tree support to the sdio module wlcore: sdio: add wilink clock providers wlcore: sdio: get clocks from device tree wlcore/wl12xx: check if we got correct clock data from DT arch/arm/mach-davinci/board-da850-evm.c | 5 +- arch/arm/mach-omap2/board-4430sdp.c | 6 +- arch/arm/mach-omap2/board-omap3evm.c | 4 +- arch/arm/mach-omap2/board-omap3pandora.c | 4 +- arch/arm/mach-omap2/board-omap4panda.c | 4 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- arch/arm/mach-omap2/board-zoom-peripherals.c | 4 +- drivers/net/wireless/ti/wilink_platform_data.c | 37 ++++++-- drivers/net/wireless/ti/wl1251/sdio.c | 12 +-- drivers/net/wireless/ti/wl1251/spi.c | 2 +- drivers/net/wireless/ti/wl12xx/main.c | 78 +++++++++++++++-- drivers/net/wireless/ti/wl12xx/wl12xx.h | 28 ++++++ drivers/net/wireless/ti/wlcore/debugfs.c | 2 +- drivers/net/wireless/ti/wlcore/main.c | 16 ++-- drivers/net/wireless/ti/wlcore/sdio.c | 112 ++++++++++++++++++++++-- drivers/net/wireless/ti/wlcore/wlcore.h | 5 +- drivers/net/wireless/ti/wlcore/wlcore_i.h | 1 + include/linux/wl12xx.h | 54 ++++++------ 18 files changed, 295 insertions(+), 81 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
