On the RT3593 chipset, BBP register 86 must be
configured by different values based on the RX
antenna numbers.
Configure this register from the 'rt2800_config_ant'
function.
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.
Reference:
RT3593_CONFIG_SET_BY_ANTENNA in include/chip/rt3593.h
Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 6f6f48f..fa5bbae 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1804,6 +1804,13 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
rt2800_bbp_write(rt2x00dev, 3, r3);
rt2800_bbp_write(rt2x00dev, 1, r1);
+
+ if (rt2x00_rt(rt2x00dev, RT3593)) {
+ if (ant->rx_chain_num == 1)
+ rt2800_bbp_write(rt2x00dev, 86, 0x00);
+ else
+ rt2800_bbp_write(rt2x00dev, 86, 0x46);
+ }
}
EXPORT_SYMBOL_GPL(rt2800_config_ant);
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
