Hi Gabor,
thanks for your submission. I tried to test it, but stuck at the problem
mentioned below.
Regards,
Andreas
Gabor Juhos wrote:
> Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
> driver.
>
> References:
> NICInitRT3593BbpRegisters in chips/rt3593.c
> NICInitBBP in common/rtmp_init.c
> NICInitAsicFromEEPROM in common/rtmp_init.c
>
> Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
> ---
> drivers/net/wireless/rt2x00/rt2800lib.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
> index 6f58ceb..32ecd1a 100644
> --- a/drivers/net/wireless/rt2x00/rt2800lib.c
> +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
> @@ -4505,6 +4505,22 @@ static void rt2800_init_bbp_3572(struct rt2x00_dev *rt2x00dev)
> rt2800_disable_unused_dac_adc(rt2x00dev);
> }
>
> +static void rt2800_init_bbp_3593(struct rt2x00_dev *rt2x00dev)
> +{
> + rt2800_init_bbp_early(rt2x00dev);
> +
> + rt2800_bbp_write(rt2x00dev, 79, 0x13);
> + rt2800_bbp_write(rt2x00dev, 80, 0x05);
> + rt2800_bbp_write(rt2x00dev, 81, 0x33);
> + rt2800_bbp_write(rt2x00dev, 137, 0x0f);
> +
> + rt2800_bbp_write(rt2x00dev, 84, 0x19);
> +
> + /* Enable DC filter */
> + if (rt2x00_rt_rev_gte(rt2x00dev, RT3593, REV_RT3593E))
Where is REV_RT3593E defined?
/tmp/backports-20130617/drivers/net/wireless/rt2x00/rt2800lib.c: In
function ‘rt2800_init_bbp_3593’:
/tmp/backports-20130617/drivers/net/wireless/rt2x00/rt2800lib.c:5325:43:
error: ‘REV_RT3593E’ undeclared (first use in this function)
Thanks,
Andreas
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
