Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.
Reference:
RT3593_ChipSwitchChannel in chips/rt3593.c
Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2800.h | 46 +++-
drivers/net/wireless/rt2x00/rt2800lib.c | 366 ++++++++++++++++++++++++++++++-
2 files changed, 409 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 7688e15..1ba797b 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2092,6 +2092,10 @@ struct mac_iveiv_entry {
#define BBP109_TX0_POWER FIELD8(0x0f)
#define BBP109_TX1_POWER FIELD8(0xf0)
+/* BBP 110 */
+#define BBP110_TX2_POWER FIELD8(0x0f)
+
+
/*
* BBP 138: Unknown
*/
@@ -2141,6 +2145,12 @@ struct mac_iveiv_entry {
#define RFCSR3_PA2_CASCODE_BIAS_CCKK FIELD8(0x80)
/* Bits for RF3290/RF5360/RF5370/RF5372/RF5390/RF5392 */
#define RFCSR3_VCOCAL_EN FIELD8(0x80)
+/* Bits for RF3050 */
+#define RFCSR3_BIT1 FIELD8(0x02)
+#define RFCSR3_BIT2 FIELD8(0x04)
+#define RFCSR3_BIT3 FIELD8(0x08)
+#define RFCSR3_BIT4 FIELD8(0x10)
+#define RFCSR3_BIT5 FIELD8(0x20)
/*
* FRCSR 5:
@@ -2153,6 +2163,8 @@ struct mac_iveiv_entry {
#define RFCSR6_R1 FIELD8(0x03)
#define RFCSR6_R2 FIELD8(0x40)
#define RFCSR6_TXDIV FIELD8(0x0c)
+/* bits for RF3053 */
+#define RFCSR6_VCO_IC FIELD8(0xc0)
/*
* RFCSR 7:
@@ -2177,7 +2189,12 @@ struct mac_iveiv_entry {
* RFCSR 11:
*/
#define RFCSR11_R FIELD8(0x03)
+#define RFCSR11_PLL_MOD FIELD8(0x0c)
#define RFCSR11_MOD FIELD8(0xc0)
+/* bits for RF3053 */
+/* TODO: verify RFCSR11_MOD usage on other chips */
+#define RFCSR11_PLL_IDOH FIELD8(0x40)
+
/*
* RFCSR 12:
@@ -2273,6 +2290,12 @@ struct mac_iveiv_entry {
#define RFCSR31_RX_H20M FIELD8(0x20)
#define RFCSR31_RX_CALIB FIELD8(0x7f)
+/* RFCSR 32 bits for RF3053 */
+#define RFCSR32_TX_AGC_FC FIELD8(0xf8)
+
+/* RFCSR 36 bits for RF3053 */
+#define RFCSR36_RF_BS FIELD8(0x80)
+
/*
* RFCSR 38:
*/
@@ -2281,6 +2304,7 @@ struct mac_iveiv_entry {
/*
* RFCSR 39:
*/
+#define RFCSR39_RX_DIV FIELD8(0x40)
#define RFCSR39_RX_LO2_EN FIELD8(0x80)
/*
@@ -2288,18 +2312,36 @@ struct mac_iveiv_entry {
*/
#define RFCSR49_TX FIELD8(0x3f)
#define RFCSR49_EP FIELD8(0xc0)
+/* bits for RT3593 */
+#define RFCSR49_TX_LO1_IC FIELD8(0x1c)
+#define RFCSR49_TX_DIV FIELD8(0x20)
/*
* RFCSR 50:
*/
#define RFCSR50_TX FIELD8(0x3f)
#define RFCSR50_EP FIELD8(0xc0)
-/* bits for RT3593*/
+/* bits for RT3593 */
+#define RFCSR50_TX_LO1_EN FIELD8(0x20)
#define RFCSR50_TX_LO2_EN FIELD8(0x10)
/* RFCSR 51 */
-/* bits for RT3593*/
+/* bits for RT3593 */
+#define RFCSR51_BITS01 FIELD8(0x03)
#define RFCSR51_BITS24 FIELD8(0x1c)
+#define RFCSR51_BITS57 FIELD8(0xe0)
+
+#define RFCSR53_TX_POWER FIELD8(0x3f)
+#define RFCSR53_UNKNOWN FIELD8(0xc0)
+
+#define RFCSR54_TX_POWER FIELD8(0x3f)
+#define RFCSR54_UNKNOWN FIELD8(0xc0)
+
+#define RFCSR55_TX_POWER FIELD8(0x3f)
+#define RFCSR55_UNKNOWN FIELD8(0xc0)
+
+#define RFCSR57_DRV_CC FIELD8(0xfc)
+
/*
* RF registers
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 6dcf03a..ab67dba 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2169,6 +2169,303 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
}
+static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
+{
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+ u8 txrx_agc_fc;
+ u8 txrx_h20m;
+ u8 rfcsr;
+ u8 bbp;
+ const bool txbf_enabled = false; /* TODO */
+
+ /* TODO: use TX{0,1,2}FinePowerControl values from EEPROM */
+ rt2800_bbp_read(rt2x00dev, 109, &bbp);
+ rt2x00_set_field8(&bbp, BBP109_TX0_POWER, 0);
+ rt2x00_set_field8(&bbp, BBP109_TX1_POWER, 0);
+ rt2800_bbp_write(rt2x00dev, 109, bbp);
+
+ rt2800_bbp_read(rt2x00dev, 110, &bbp);
+ rt2x00_set_field8(&bbp, BBP110_TX2_POWER, 0);
+ rt2800_bbp_write(rt2x00dev, 110, bbp);
+
+ if (rf->channel <= 14) {
+ /* Restore BBP 25 & 26 for 2.4 GHz */
+ rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25);
+ rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26);
+ } else {
+ /* Hard code BBP 25 & 26 for 5GHz */
+
+ /* Enable IQ Phase correction */
+ rt2800_bbp_write(rt2x00dev, 25, 0x09);
+ /* Setup IQ Phase correction value */
+ rt2800_bbp_write(rt2x00dev, 26, 0xff);
+ }
+
+ rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
+ rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3 & 0xf);
+
+ rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR11_R, (rf->rf2 & 0x3));
+ rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR11_PLL_IDOH, 1);
+ if (rf->channel <= 14)
+ rt2x00_set_field8(&rfcsr, RFCSR11_PLL_MOD, 1);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR11_PLL_MOD, 2);
+ rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 53, &rfcsr);
+ if (rf->channel <= 14) {
+ rfcsr = 0;
+ rt2x00_set_field8(&rfcsr, RFCSR53_TX_POWER,
+ info->default_power1 & 0x1f);
+ } else {
+ if (rt2x00_is_usb(rt2x00dev))
+ rfcsr = 0x40;
+
+ rt2x00_set_field8(&rfcsr, RFCSR53_TX_POWER,
+ ((info->default_power1 & 0x18) << 1) |
+ (info->default_power1 & 7));
+ }
+ rt2800_rfcsr_write(rt2x00dev, 53, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 55, &rfcsr);
+ if (rf->channel <= 14) {
+ rfcsr = 0;
+ rt2x00_set_field8(&rfcsr, RFCSR55_TX_POWER,
+ info->default_power2 & 0x1f);
+ } else {
+ if (rt2x00_is_usb(rt2x00dev))
+ rfcsr = 0x40;
+
+ rt2x00_set_field8(&rfcsr, RFCSR55_TX_POWER,
+ ((info->default_power2 & 0x18) << 1) |
+ (info->default_power2 & 7));
+ }
+ rt2800_rfcsr_write(rt2x00dev, 55, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 54, &rfcsr);
+ if (rf->channel <= 14) {
+ rfcsr = 0;
+ rt2x00_set_field8(&rfcsr, RFCSR54_TX_POWER,
+ info->default_power3 & 0x1f);
+ } else {
+ if (rt2x00_is_usb(rt2x00dev))
+ rfcsr = 0x40;
+
+ rt2x00_set_field8(&rfcsr, RFCSR54_TX_POWER,
+ ((info->default_power3 & 0x18) << 1) |
+ (info->default_power3 & 7));
+ }
+ rt2800_rfcsr_write(rt2x00dev, 54, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
+
+ switch (rt2x00dev->default_ant.tx_chain_num) {
+ case 3:
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
+ /* fallthrough */
+ case 2:
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
+ /* fallthrough */
+ case 1:
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
+ break;
+ }
+
+ switch (rt2x00dev->default_ant.rx_chain_num) {
+ case 3:
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
+ /* fallthrough */
+ case 2:
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
+ /* fallthrough */
+ case 1:
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
+ break;
+ }
+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
+
+ /* TODO: frequency calibration? */
+
+ if (conf_is_ht40(conf)) {
+ txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40,
+ RFCSR24_TX_AGC_FC);
+ txrx_h20m = rt2x00_get_field8(drv_data->calibration_bw40,
+ RFCSR24_TX_H20M);
+ } else {
+ txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw20,
+ RFCSR24_TX_AGC_FC);
+ txrx_h20m = rt2x00_get_field8(drv_data->calibration_bw20,
+ RFCSR24_TX_H20M);
+ }
+
+ /* NOTE: the reference driver does not writes the new value
+ * back to RFCSR 32
+ */
+ rt2800_rfcsr_read(rt2x00dev, 32, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR32_TX_AGC_FC, txrx_agc_fc);
+
+ if (rf->channel <= 14)
+ rfcsr = 0xa0;
+ else
+ rfcsr = 0x80;
+ rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, txrx_h20m);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, txrx_h20m);
+ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+ /* Band selection */
+ rt2800_rfcsr_read(rt2x00dev, 36, &rfcsr);
+ if (rf->channel <= 14)
+ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0);
+ rt2800_rfcsr_write(rt2x00dev, 36, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 34, &rfcsr);
+ if (rf->channel <= 14)
+ rfcsr = 0x3c;
+ else
+ rfcsr = 0x20;
+ rt2800_rfcsr_write(rt2x00dev, 34, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
+ if (rf->channel <= 14)
+ rfcsr = 0x1a;
+ else
+ rfcsr = 0x12;
+ rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
+ if (rf->channel >= 1 && rf->channel <= 14)
+ rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1);
+ else if (rf->channel >= 36 && rf->channel <= 64)
+ rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
+ else if (rf->channel >= 100 && rf->channel <= 128)
+ rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1);
+ rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2);
+ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+ rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
+
+ if (rf->channel <= 14) {
+ rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
+ rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
+ } else {
+ rt2800_rfcsr_write(rt2x00dev, 10, 0xd8);
+ rt2800_rfcsr_write(rt2x00dev, 13, 0x23);
+ }
+
+ rt2800_rfcsr_read(rt2x00dev, 51, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR51_BITS01, 1);
+ rt2800_rfcsr_write(rt2x00dev, 51, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 51, &rfcsr);
+ if (rf->channel <= 14) {
+ rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, 5);
+ rt2x00_set_field8(&rfcsr, RFCSR51_BITS57, 3);
+ } else {
+ rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, 4);
+ rt2x00_set_field8(&rfcsr, RFCSR51_BITS57, 2);
+ }
+ rt2800_rfcsr_write(rt2x00dev, 51, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr);
+ if (rf->channel <= 14)
+ rt2x00_set_field8(&rfcsr, RFCSR49_TX_LO1_IC, 3);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR49_TX_LO1_IC, 2);
+
+ if (txbf_enabled)
+ rt2x00_set_field8(&rfcsr, RFCSR49_TX_DIV, 1);
+
+ rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR50_TX_LO1_EN, 0);
+ rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 57, &rfcsr);
+ if (rf->channel <= 14)
+ rt2x00_set_field8(&rfcsr, RFCSR57_DRV_CC, 0x1b);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR57_DRV_CC, 0x0f);
+ rt2800_rfcsr_write(rt2x00dev, 57, rfcsr);
+
+ if (rf->channel <= 14) {
+ rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
+ rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
+ } else {
+ rt2800_rfcsr_write(rt2x00dev, 44, 0x9b);
+ rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
+ }
+
+ /* Initiate VCO calibration */
+ rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
+ if (rf->channel <= 14) {
+ rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
+ } else {
+ rt2x00_set_field8(&rfcsr, RFCSR3_BIT1, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR3_BIT2, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR3_BIT3, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR3_BIT4, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR3_BIT5, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
+ }
+ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
+
+ if (rf->channel >= 1 && rf->channel <= 14) {
+ rfcsr = 0x23;
+ if (txbf_enabled)
+ rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
+ rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
+
+ rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
+ } else if (rf->channel >= 36 && rf->channel <= 64) {
+ rfcsr = 0x36;
+ if (txbf_enabled)
+ rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
+ rt2800_rfcsr_write(rt2x00dev, 39, 0x36);
+
+ rt2800_rfcsr_write(rt2x00dev, 45, 0xeb);
+ } else if (rf->channel >= 100 && rf->channel <= 128) {
+ rfcsr = 0x32;
+ if (txbf_enabled)
+ rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
+ rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
+
+ rt2800_rfcsr_write(rt2x00dev, 45, 0xb3);
+ } else {
+ rfcsr = 0x30;
+ if (txbf_enabled)
+ rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
+ rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
+
+ rt2800_rfcsr_write(rt2x00dev, 45, 0x9b);
+ }
+}
+
#define POWER_BOUND 0x27
#define POWER_BOUND_5G 0x2b
#define FREQ_OFFSET_BOUND 0x5f
@@ -2785,6 +3082,9 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
case RF3052:
rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info);
break;
+ case RF3053:
+ rt2800_config_channel_rf3053(rt2x00dev, conf, rf, info);
+ break;
case RF3290:
rt2800_config_channel_rf3290(rt2x00dev, conf, rf, info);
break;
@@ -2830,6 +3130,23 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain);
rt2800_bbp_write(rt2x00dev, 27, 0x20);
rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain);
+ } else if (rt2x00_rt(rt2x00dev, RT3593)) {
+ if (rf->channel > 14) {
+ /* Disable CCK Packet detection on 5GHz */
+ rt2800_bbp_write(rt2x00dev, 70, 0x00);
+ } else {
+ rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+ }
+
+ if (conf_is_ht40(conf))
+ rt2800_bbp_write(rt2x00dev, 105, 0x04);
+ else
+ rt2800_bbp_write(rt2x00dev, 105, 0x34);
+
+ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 77, 0x98);
} else {
rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
@@ -2845,16 +3162,27 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2800_bbp_write(rt2x00dev, 82, 0x62);
rt2800_bbp_write(rt2x00dev, 75, 0x46);
} else {
- rt2800_bbp_write(rt2x00dev, 82, 0x84);
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ rt2800_bbp_write(rt2x00dev, 82, 0x62);
+ else
+ rt2800_bbp_write(rt2x00dev, 82, 0x84);
rt2800_bbp_write(rt2x00dev, 75, 0x50);
}
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ rt2800_bbp_write(rt2x00dev, 83, 0x8a);
}
+
} else {
if (rt2x00_rt(rt2x00dev, RT3572))
rt2800_bbp_write(rt2x00dev, 82, 0x94);
+ else if (rt2x00_rt(rt2x00dev, RT3593))
+ rt2800_bbp_write(rt2x00dev, 82, 0x82);
else
rt2800_bbp_write(rt2x00dev, 82, 0xf2);
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ rt2800_bbp_write(rt2x00dev, 83, 0x9a);
+
if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags))
rt2800_bbp_write(rt2x00dev, 75, 0x46);
else
@@ -2925,6 +3253,41 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
if (rt2x00_rt(rt2x00dev, RT3572))
rt2800_rfcsr_write(rt2x00dev, 8, 0x80);
+ if (rt2x00_rt(rt2x00dev, RT3593)) {
+ if (rt2x00_is_usb(rt2x00dev)) {
+ rt2800_register_read(rt2x00dev, GPIO_CTRL, ®);
+
+ /* Band selection. GPIO #8 controls all paths */
+ rt2x00_set_field32(®, GPIO_CTRL_DIR8, 0);
+ if (rf->channel <= 14)
+ rt2x00_set_field32(®, GPIO_CTRL_VAL8, 1);
+ else
+ rt2x00_set_field32(®, GPIO_CTRL_VAL8, 0);
+
+ rt2x00_set_field32(®, GPIO_CTRL_DIR4, 0);
+ rt2x00_set_field32(®, GPIO_CTRL_DIR7, 0);
+
+ /* LNA PE control.
+ * GPIO #4 controls PE0 and PE1,
+ * GPIO #7 controls PE2
+ */
+ rt2x00_set_field32(®, GPIO_CTRL_VAL4, 1);
+ rt2x00_set_field32(®, GPIO_CTRL_VAL7, 1);
+
+ rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
+ }
+
+ /* AGC init */
+ if (rf->channel <= 14)
+ reg = 0x1c + 2 * rt2x00dev->lna_gain;
+ else
+ reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3);
+
+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
+
+ usleep_range(1000, 1500);
+ }
+
if (rt2x00_rt(rt2x00dev, RT5592)) {
rt2800_bbp_write(rt2x00dev, 195, 141);
rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a);
@@ -5884,6 +6247,7 @@ static void rt3593_post_bbp_init(struct rt2x00_dev *rt2x00dev)
/* FIXME: BBP 105 owerwrite? */
rt2800_bbp_write(rt2x00dev, 105, 0x04);
+
}
static void rt2800_init_rfcsr_3593(struct rt2x00_dev *rt2x00dev)
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
