The patch converts the EEPROM_* word address defines
into new enum values. The new enum type will be used
by new functions which will be introduced in subsequent
changes.
The patch contains no functional changes.
Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2800.h | 79 +++++++++++++++++-----------------
1 file changed, 39 insertions(+), 40 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index d78c495..0647039 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2206,28 +2206,59 @@ struct mac_iveiv_entry {
* The wordsize of the EEPROM is 16 bits.
*/
-/*
- * Chip ID
- */
-#define EEPROM_CHIP_ID 0x0000
+enum rt2800_eeprom_word {
+ EEPROM_CHIP_ID = 0x0000,
+ EEPROM_VERSION = 0x0001,
+ EEPROM_MAC_ADDR_0 = 0x0002,
+ EEPROM_MAC_ADDR_1 = 0x0003,
+ EEPROM_MAC_ADDR_2 = 0x0004,
+ EEPROM_NIC_CONF0 = 0x001a,
+ EEPROM_NIC_CONF1 = 0x001b,
+ EEPROM_FREQ = 0x001d,
+ EEPROM_LED_AG_CONF = 0x001e,
+ EEPROM_LED_ACT_CONF = 0x001f,
+ EEPROM_LED_POLARITY = 0x0020,
+ EEPROM_NIC_CONF2 = 0x0021,
+ EEPROM_LNA = 0x0022,
+ EEPROM_RSSI_BG = 0x0023,
+ EEPROM_RSSI_BG2 = 0x0024,
+ EEPROM_TXMIXER_GAIN_BG = 0x0024, /* overlaps with RSSI_BG2 */
+ EEPROM_RSSI_A = 0x0025,
+ EEPROM_RSSI_A2 = 0x0026,
+ EEPROM_TXMIXER_GAIN_A = 0x0026, /* overlaps with RSSI_A2 */
+ EEPROM_EIRP_MAX_TX_POWER = 0x0027,
+ EEPROM_TXPOWER_DELTA = 0x0028,
+ EEPROM_TXPOWER_BG1 = 0x0029,
+ EEPROM_TXPOWER_BG2 = 0x0030,
+ EEPROM_TSSI_BOUND_BG1 = 0x0037,
+ EEPROM_TSSI_BOUND_BG2 = 0x0038,
+ EEPROM_TSSI_BOUND_BG3 = 0x0039,
+ EEPROM_TSSI_BOUND_BG4 = 0x003a,
+ EEPROM_TSSI_BOUND_BG5 = 0x003b,
+ EEPROM_TXPOWER_A1 = 0x003c,
+ EEPROM_TXPOWER_A2 = 0x0053,
+ EEPROM_TSSI_BOUND_A1 = 0x006a,
+ EEPROM_TSSI_BOUND_A2 = 0x006b,
+ EEPROM_TSSI_BOUND_A3 = 0x006c,
+ EEPROM_TSSI_BOUND_A4 = 0x006d,
+ EEPROM_TSSI_BOUND_A5 = 0x006e,
+ EEPROM_TXPOWER_BYRATE = 0x006f,
+ EEPROM_BBP_START = 0x0078,
+};
/*
* EEPROM Version
*/
-#define EEPROM_VERSION 0x0001
#define EEPROM_VERSION_FAE FIELD16(0x00ff)
#define EEPROM_VERSION_VERSION FIELD16(0xff00)
/*
* HW MAC address.
*/
-#define EEPROM_MAC_ADDR_0 0x0002
#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
-#define EEPROM_MAC_ADDR_1 0x0003
#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
-#define EEPROM_MAC_ADDR_2 0x0004
#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
@@ -2237,7 +2268,6 @@ struct mac_iveiv_entry {
* TXPATH: 1: 1T, 2: 2T, 3: 3T
* RF_TYPE: RFIC type
*/
-#define EEPROM_NIC_CONF0 0x001a
#define EEPROM_NIC_CONF0_RXPATH FIELD16(0x000f)
#define EEPROM_NIC_CONF0_TXPATH FIELD16(0x00f0)
#define EEPROM_NIC_CONF0_RF_TYPE FIELD16(0x0f00)
@@ -2261,7 +2291,6 @@ struct mac_iveiv_entry {
* BT_COEXIST: 0: disable, 1: enable
* DAC_TEST: 0: disable, 1: enable
*/
-#define EEPROM_NIC_CONF1 0x001b
#define EEPROM_NIC_CONF1_HW_RADIO FIELD16(0x0001)
#define EEPROM_NIC_CONF1_EXTERNAL_TX_ALC FIELD16(0x0002)
#define EEPROM_NIC_CONF1_EXTERNAL_LNA_2G FIELD16(0x0004)
@@ -2281,7 +2310,6 @@ struct mac_iveiv_entry {
/*
* EEPROM frequency
*/
-#define EEPROM_FREQ 0x001d
#define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00)
#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000)
@@ -2298,9 +2326,6 @@ struct mac_iveiv_entry {
* POLARITY_GPIO_4: Polarity GPIO4 setting.
* LED_MODE: Led mode.
*/
-#define EEPROM_LED_AG_CONF 0x001e
-#define EEPROM_LED_ACT_CONF 0x001f
-#define EEPROM_LED_POLARITY 0x0020
#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001)
#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
@@ -2317,7 +2342,6 @@ struct mac_iveiv_entry {
* TX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream
* CRYSTAL: 00: Reserved, 01: One crystal, 10: Two crystal, 11: Reserved
*/
-#define EEPROM_NIC_CONF2 0x0021
#define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f)
#define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0)
#define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600)
@@ -2325,54 +2349,46 @@ struct mac_iveiv_entry {
/*
* EEPROM LNA
*/
-#define EEPROM_LNA 0x0022
#define EEPROM_LNA_BG FIELD16(0x00ff)
#define EEPROM_LNA_A0 FIELD16(0xff00)
/*
* EEPROM RSSI BG offset
*/
-#define EEPROM_RSSI_BG 0x0023
#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff)
#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00)
/*
* EEPROM RSSI BG2 offset
*/
-#define EEPROM_RSSI_BG2 0x0024
#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff)
#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00)
/*
* EEPROM TXMIXER GAIN BG offset (note overlaps with EEPROM RSSI BG2).
*/
-#define EEPROM_TXMIXER_GAIN_BG 0x0024
#define EEPROM_TXMIXER_GAIN_BG_VAL FIELD16(0x0007)
/*
* EEPROM RSSI A offset
*/
-#define EEPROM_RSSI_A 0x0025
#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff)
#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00)
/*
* EEPROM RSSI A2 offset
*/
-#define EEPROM_RSSI_A2 0x0026
#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff)
#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00)
/*
* EEPROM TXMIXER GAIN A offset (note overlaps with EEPROM RSSI A2).
*/
-#define EEPROM_TXMIXER_GAIN_A 0x0026
#define EEPROM_TXMIXER_GAIN_A_VAL FIELD16(0x0007)
/*
* EEPROM EIRP Maximum TX power values(unit: dbm)
*/
-#define EEPROM_EIRP_MAX_TX_POWER 0x0027
#define EEPROM_EIRP_MAX_TX_POWER_2GHZ FIELD16(0x00ff)
#define EEPROM_EIRP_MAX_TX_POWER_5GHZ FIELD16(0xff00)
@@ -2383,7 +2399,6 @@ struct mac_iveiv_entry {
* TYPE: 1: Plus the delta value, 0: minus the delta value
* ENABLE: enable tx power compensation for 40BW
*/
-#define EEPROM_TXPOWER_DELTA 0x0028
#define EEPROM_TXPOWER_DELTA_VALUE_2G FIELD16(0x003f)
#define EEPROM_TXPOWER_DELTA_TYPE_2G FIELD16(0x0040)
#define EEPROM_TXPOWER_DELTA_ENABLE_2G FIELD16(0x0080)
@@ -2394,8 +2409,6 @@ struct mac_iveiv_entry {
/*
* EEPROM TXPOWER 802.11BG
*/
-#define EEPROM_TXPOWER_BG1 0x0029
-#define EEPROM_TXPOWER_BG2 0x0030
#define EEPROM_TXPOWER_BG_SIZE 7
#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff)
#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00)
@@ -2407,7 +2420,6 @@ struct mac_iveiv_entry {
* MINUS3: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -3)
*/
-#define EEPROM_TSSI_BOUND_BG1 0x0037
#define EEPROM_TSSI_BOUND_BG1_MINUS4 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG1_MINUS3 FIELD16(0xff00)
@@ -2418,7 +2430,6 @@ struct mac_iveiv_entry {
* MINUS1: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -1)
*/
-#define EEPROM_TSSI_BOUND_BG2 0x0038
#define EEPROM_TSSI_BOUND_BG2_MINUS2 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG2_MINUS1 FIELD16(0xff00)
@@ -2428,7 +2439,6 @@ struct mac_iveiv_entry {
* PLUS1: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 1)
*/
-#define EEPROM_TSSI_BOUND_BG3 0x0039
#define EEPROM_TSSI_BOUND_BG3_REF FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG3_PLUS1 FIELD16(0xff00)
@@ -2439,7 +2449,6 @@ struct mac_iveiv_entry {
* PLUS3: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 3)
*/
-#define EEPROM_TSSI_BOUND_BG4 0x003a
#define EEPROM_TSSI_BOUND_BG4_PLUS2 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG4_PLUS3 FIELD16(0xff00)
@@ -2449,15 +2458,12 @@ struct mac_iveiv_entry {
* increased by (agc_step * 4)
* AGC_STEP: Temperature compensation step.
*/
-#define EEPROM_TSSI_BOUND_BG5 0x003b
#define EEPROM_TSSI_BOUND_BG5_PLUS4 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG5_AGC_STEP FIELD16(0xff00)
/*
* EEPROM TXPOWER 802.11A
*/
-#define EEPROM_TXPOWER_A1 0x003c
-#define EEPROM_TXPOWER_A2 0x0053
#define EEPROM_TXPOWER_A_SIZE 6
#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
@@ -2469,7 +2475,6 @@ struct mac_iveiv_entry {
* MINUS3: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -3)
*/
-#define EEPROM_TSSI_BOUND_A1 0x006a
#define EEPROM_TSSI_BOUND_A1_MINUS4 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A1_MINUS3 FIELD16(0xff00)
@@ -2480,7 +2485,6 @@ struct mac_iveiv_entry {
* MINUS1: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -1)
*/
-#define EEPROM_TSSI_BOUND_A2 0x006b
#define EEPROM_TSSI_BOUND_A2_MINUS2 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A2_MINUS1 FIELD16(0xff00)
@@ -2490,7 +2494,6 @@ struct mac_iveiv_entry {
* PLUS1: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 1)
*/
-#define EEPROM_TSSI_BOUND_A3 0x006c
#define EEPROM_TSSI_BOUND_A3_REF FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A3_PLUS1 FIELD16(0xff00)
@@ -2501,7 +2504,6 @@ struct mac_iveiv_entry {
* PLUS3: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 3)
*/
-#define EEPROM_TSSI_BOUND_A4 0x006d
#define EEPROM_TSSI_BOUND_A4_PLUS2 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A4_PLUS3 FIELD16(0xff00)
@@ -2511,14 +2513,12 @@ struct mac_iveiv_entry {
* increased by (agc_step * 4)
* AGC_STEP: Temperature compensation step.
*/
-#define EEPROM_TSSI_BOUND_A5 0x006e
#define EEPROM_TSSI_BOUND_A5_PLUS4 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A5_AGC_STEP FIELD16(0xff00)
/*
* EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode
*/
-#define EEPROM_TXPOWER_BYRATE 0x006f
#define EEPROM_TXPOWER_BYRATE_SIZE 9
#define EEPROM_TXPOWER_BYRATE_RATE0 FIELD16(0x000f)
@@ -2529,7 +2529,6 @@ struct mac_iveiv_entry {
/*
* EEPROM BBP.
*/
-#define EEPROM_BBP_START 0x0078
#define EEPROM_BBP_SIZE 16
#define EEPROM_BBP_VALUE FIELD16(0x00ff)
#define EEPROM_BBP_REG_ID FIELD16(0xff00)
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
