Sent from my iPad
On 22 jun. 2013, at 13:13, Gabor Juhos <juhosg@xxxxxxxxxxx> wrote:
> The current code uses the same index value both
> for the channel information array and for the TX
> power table. The index starts from 14, however the
> index of the TX power table must start from zero.
>
> Fix it, in order to get the correct TX power value
> for a given channel.
>
> The changes in rt61pci.c and rt73usb.c are compile
> tested only.
>
> Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
Acked-by: Gertjan van Wingerde
Good catch. This can certainly explain why people were seeing bad results on the 5 GHz band.
> ---
> John,
>
> If there is any chance for that, this should go
> into 3.10. However the code is wrong since a few
> years and nobody noticed that so far, so it is
> not a big problem if it will be applied only in
> 3.11.
>
> -Gabor
> ---
> drivers/net/wireless/rt2x00/rt2800lib.c | 4 ++--
> drivers/net/wireless/rt2x00/rt61pci.c | 3 ++-
> drivers/net/wireless/rt2x00/rt73usb.c | 3 ++-
> 3 files changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
> index 3aa30dd..4072242 100644
> --- a/drivers/net/wireless/rt2x00/rt2800lib.c
> +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
> @@ -6254,8 +6254,8 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
> default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
>
> for (i = 14; i < spec->num_channels; i++) {
> - info[i].default_power1 = default_power1[i];
> - info[i].default_power2 = default_power2[i];
> + info[i].default_power1 = default_power1[i - 14];
> + info[i].default_power2 = default_power2[i - 14];
> }
> }
>
> diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
> index 53754bc6..54d3ddf 100644
> --- a/drivers/net/wireless/rt2x00/rt61pci.c
> +++ b/drivers/net/wireless/rt2x00/rt61pci.c
> @@ -2825,7 +2825,8 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
> tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
> for (i = 14; i < spec->num_channels; i++) {
> info[i].max_power = MAX_TXPOWER;
> - info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
> + info[i].default_power1 =
> + TXPOWER_FROM_DEV(tx_power[i - 14]);
> }
> }
>
> diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
> index 1616ed4..1d3880e 100644
> --- a/drivers/net/wireless/rt2x00/rt73usb.c
> +++ b/drivers/net/wireless/rt2x00/rt73usb.c
> @@ -2167,7 +2167,8 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
> tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
> for (i = 14; i < spec->num_channels; i++) {
> info[i].max_power = MAX_TXPOWER;
> - info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
> + info[i].default_power1 =
> + TXPOWER_FROM_DEV(tx_power[i - 14]);
> }
> }
>
> --
> 1.7.10
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
