On Wed, Jun 19, 2013 at 08:37:42PM +0200, thus spake Oleksij Rempel:
> Can you please tell more about your access point:
> - hardware
> - firmware
> - configuration
> - "iw dev wlan0 scan dump"
I tested the thing with at least three different APs:
- Netgear DG834Gv4 with latest firmware.
- Netgear DG834Gv5 (don't know which firmware and can't check at this time).
- hostapd (can't say which version at this time either) with the same
ath9k_htc.
All APs are configured for WPA2-PSK.
The scan dump for the first AP:
BSS 00:1e:2a:ed:35:70 (on wlan7)
TSF: 163623606 usec (0d, 00:02:43)
freq: 2412
beacon interval: 100
capability: ESS Privacy ShortSlotTime (0x0411)
signal: -43.00 dBm
last seen: 24 ms ago
Information elements from Probe Response frame:
SSID: Wolfnet
Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0
DS Parameter set: channel 1
ERP: Barker_Preamble_Mode
RSN: * Version: 1
* Group cipher: CCMP
* Pairwise ciphers: CCMP
* Authentication suites: PSK
* Capabilities: 16-PTKSA-RC (0x000c)
Extended supported rates: 6.0 9.0 12.0 48.0
WMM: * Parameter version 1
* u-APSD
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
--
Save the whales. Feed the hungry. Free the mallocs.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
