A typo causes routine rtl92cu_phy_rf6052_set_cck_txpower() to test the
same condition twice. The problem was found using cppcheck-1.49, and the
proper fix was verified against the pre-mac80211 version of the code.
This patch was originally included as commit 1288aa4, but was accidentally
reverted in a later patch.
Reported-by: David Binderman <dcb314@xxxxxxxxxxx> [original report]
Reported-by: Andrea Morello <andrea.merello@xxxxxxxxx> [report of accidental reversion]
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: stable <stable@xxxxxxxxxx> [back to 2.6.39]
---
John,
Although this patch is trivial and could be included in the 3.10 stream,
I think we should not burden DaveM nor Linus with it this late in the 3.10
cycle. Please push it into the 3.11 stream.
Thanks,
Larry
---
drivers/net/wireless/rtlwifi/rtl8192cu/rf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
index 953f1a0..2119313 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
@@ -104,7 +104,7 @@ void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
tx_agc[RF90_PATH_A] = 0x10101010;
tx_agc[RF90_PATH_B] = 0x10101010;
} else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
- TXHIGHPWRLEVEL_LEVEL1) {
+ TXHIGHPWRLEVEL_LEVEL2) {
tx_agc[RF90_PATH_A] = 0x00000000;
tx_agc[RF90_PATH_B] = 0x00000000;
} else{
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
