Hello, I was rather pleased to see that my Edimax ew7318usg was supported by mainline. I created a new config, compiled, (no errors), and rebooted with the wireless card plugged in and I get errors on module load. Here is the output from dmesg: rt73usb 1-1:1.0: usb_probe_interface rt73usb 1-1:1.0: usb_probe_interface - got id phy0 -> rt73usb_validate_eeprom: EEPROM recovery - NIC: 0xffef phy0 -> rt73usb_validate_eeprom: EEPROM recovery - Led: 0xe000 phy0 -> rt73usb_validate_eeprom: EEPROM recovery - RSSI OFFSET BG: 0x0000 phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 1300, rf: 0002, rev: 0002573a. phy0: Selected rate control algorithm 'simple' phy0: Failed to initialize wep phy0 -> rt2x00lib_probe_dev: Error - Failed to initialize hw. rt73usb: probe of 1-1:1.0 failed with error -12 usbcore: registered new interface driver rt73usb What do I need to do to get a working rt73usb driver? Thanks, Adam _________________________________________________________________ Shed those extra pounds with MSN and The Biggest Loser! http://biggestloser.msn.com/- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
