To allow channel switch announcements within beacons, add
the channel switch command to nl80211/cfg80211. This is
implementation is intended for AP and (later) IBSS mode.
Signed-off-by: Simon Wunderlich <siwu@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@xxxxxxxxxxxxxxxxxxx>
---
Changes to RFCv1:
* accept and pass CSA IEs and after-change IEs
* use parameter structure instead of individual parameters
---
include/net/cfg80211.h | 26 ++++++++++
include/uapi/linux/nl80211.h | 29 +++++++++++
net/wireless/nl80211.c | 118 +++++++++++++++++++++++++++++++++++++++++-
3 files changed, 172 insertions(+), 1 deletion(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 3c3a563..0de5384 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -610,6 +610,29 @@ struct cfg80211_ap_settings {
bool radar_required;
};
+/* struct cfg80211_csa_settings - channel switch settings
+ *
+ * Used for channel switch
+ *
+ * @chandef: defines the channel to use after the switch
+ * @beacon_csa: beacon data while performing the switch
+ * @counter_offset_beacon: offset for the counter within the beacon (tail)
+ * @counter_offset_presp: offset for the counter within the probe response
+ * @beacon_after: beacon data to be used on the new channel
+ * @radar_required: whether radar detection is required on the new channel
+ * @block_tx: whether transmissions should be blocked while changing
+ * @count: number of beacons until switch
+ */
+struct cfg80211_csa_settings {
+ struct cfg80211_chan_def chandef;
+ struct cfg80211_beacon_data beacon_csa;
+ u16 counter_offset_beacon, counter_offset_presp;
+ struct cfg80211_beacon_data beacon_after;
+ bool radar_required;
+ bool block_tx;
+ u8 count;
+};
+
/**
* enum station_parameters_apply_mask - station parameter values to apply
* @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
@@ -2278,6 +2301,9 @@ struct cfg80211_ops {
u16 duration);
void (*crit_proto_stop)(struct wiphy *wiphy,
struct wireless_dev *wdev);
+ int (*channel_switch)(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct cfg80211_csa_settings *params);
};
/*
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index ca6facf..ddf3b9e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -648,6 +648,16 @@
* @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can
* return back to normal.
*
+ * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the
+ * the new channel information (Channel Switch Announcement - CSA)
+ * in the beacon for some time (as defined in the
+ * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the
+ * new channel. Userspace provides the new channel information (using
+ * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel
+ * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform
+ * other station that transmission must be blocked until the channel
+ * switch is complete.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -810,6 +820,7 @@ enum nl80211_commands {
NL80211_CMD_CRIT_PROTOCOL_START,
NL80211_CMD_CRIT_PROTOCOL_STOP,
+ NL80211_CMD_CHANNEL_SWITCH,
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1436,6 +1447,18 @@ enum nl80211_commands {
* allowed to be used with the first @NL80211_CMD_SET_STATION command to
* update a TDLS peer STA entry.
*
+ * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
+ * until the channel switch event.
+ * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
+ * must be blocked on the current channel (before the channel switch
+ * operation).
+ * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+ * for the time while performing a channel switch.
+ * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter
+ * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+ * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter
+ * field in the probe response (%NL80211_ATTR_PROBE_RESP).
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1736,6 +1759,12 @@ enum nl80211_attrs {
NL80211_ATTR_PEER_AID,
+ NL80211_ATTR_CH_SWITCH_COUNT,
+ NL80211_ATTR_CH_SWITCH_BLOCK_TX,
+ NL80211_ATTR_CSA_IES,
+ NL80211_ATTR_CSA_C_OFF_BEACON,
+ NL80211_ATTR_CSA_C_OFF_PRESP,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 1c4f7da..d48a00d 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -349,6 +349,11 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_IE_RIC] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_PEER_AID] = { .type = NLA_U16 },
+ [NL80211_ATTR_CH_SWITCH_COUNT] = { .type = NLA_U32 },
+ [NL80211_ATTR_CH_SWITCH_BLOCK_TX] = { .type = NLA_FLAG },
+ [NL80211_ATTR_CSA_IES] = { .type = NLA_NESTED },
+ [NL80211_ATTR_CSA_C_OFF_BEACON] = { .type = NLA_U16 },
+ [NL80211_ATTR_CSA_C_OFF_PRESP] = { .type = NLA_U16 },
};
/* policy for the key attributes */
@@ -5540,6 +5545,109 @@ static int nl80211_start_radar_detection(struct sk_buff *skb,
return err;
}
+static int nl80211_channel_switch(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_csa_settings params;
+ struct nlattr *csa_ies[NL80211_ATTR_MAX+1];
+ u8 radar_detect_width = 0;
+ int err;
+
+ if (!rdev->ops->channel_switch)
+ return -EOPNOTSUPP;
+
+ /* may add IBSS support later */
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
+ return -EOPNOTSUPP;
+
+ memset(¶ms, 0, sizeof(params));
+
+ if (!info->attrs[NL80211_ATTR_WIPHY_FREQ] ||
+ !info->attrs[NL80211_ATTR_CH_SWITCH_COUNT])
+ return -EINVAL;
+
+ /* only important for AP, IBSS and mesh create IEs internally */
+ if (!info->attrs[NL80211_ATTR_CSA_IES] ||
+ !info->attrs[NL80211_ATTR_CSA_C_OFF_BEACON])
+ return -EINVAL;
+
+ /* useless if AP is not running */
+ if (!wdev->beacon_interval)
+ return -EINVAL;
+
+ params.count = nla_get_u32(info->attrs[NL80211_ATTR_CH_SWITCH_COUNT]);
+
+ err = nl80211_parse_beacon(info->attrs, ¶ms.beacon_after);
+ if (err)
+ return err;
+
+ err = nla_parse_nested(csa_ies, NL80211_ATTR_MAX,
+ info->attrs[NL80211_ATTR_CSA_IES],
+ nl80211_policy);
+ if (err)
+ return err;
+
+ err = nl80211_parse_beacon(csa_ies, ¶ms.beacon_csa);
+ if (err)
+ return err;
+
+ params.counter_offset_beacon =
+ nla_get_u16(info->attrs[NL80211_ATTR_CSA_C_OFF_BEACON]);
+ if (params.counter_offset_beacon > params.beacon_csa.tail_len)
+ return -EINVAL;
+
+ /* sanity check - counter should be the same this should be the same */
+ if (params.beacon_csa.tail[params.counter_offset_beacon] !=
+ params.count)
+ return -EINVAL;
+
+ if (info->attrs[NL80211_ATTR_CSA_C_OFF_PRESP]) {
+ params.counter_offset_presp =
+ nla_get_u16(info->attrs[NL80211_ATTR_CSA_C_OFF_PRESP]);
+ if (params.counter_offset_presp >
+ params.beacon_csa.probe_resp_len)
+ return -EINVAL;
+
+ if (params.beacon_csa.probe_resp[params.counter_offset_presp] !=
+ params.count)
+ return -EINVAL;
+ }
+
+ err = nl80211_parse_chandef(rdev, info, ¶ms.chandef);
+ if (err)
+ return err;
+
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, ¶ms.chandef))
+ return -EINVAL;
+
+ err = cfg80211_chandef_dfs_required(wdev->wiphy, ¶ms.chandef);
+ if (err < 0)
+ return err;
+
+ if (err)
+ radar_detect_width = BIT(params.chandef.width);
+ else
+ radar_detect_width = 0;
+
+ err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype,
+ params.chandef.chan,
+ CHAN_MODE_SHARED,
+ radar_detect_width);
+ if (err)
+ return err;
+
+ if (info->attrs[NL80211_ATTR_CH_SWITCH_BLOCK_TX])
+ params.block_tx = true;
+
+ err = rdev->ops->channel_switch(&rdev->wiphy, dev, ¶ms);
+
+ return err;
+}
+
static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb,
u32 seq, int flags,
struct cfg80211_registered_device *rdev,
@@ -8995,7 +9103,15 @@ static struct genl_ops nl80211_ops[] = {
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
NL80211_FLAG_NEED_RTNL,
- }
+ },
+ {
+ .cmd = NL80211_CMD_CHANNEL_SWITCH,
+ .doit = nl80211_channel_switch,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
