On Tue, 11 Jun 2013 13:46:15 +0200, Johannes Berg wrote: >On Fri, 2013-06-07 at 18:42 +0200, Jakub Kiciński wrote: > >> Now I can start two hostapd on those interfaces and >> everything works just fine. >> >> # iw dev wlan0-1 set type monitor >> # ip link set dev wlan0-1 address 00:00:fa:22:7c:00 >> # iw dev wlan0-1 set type managed >> # ip link >> 75: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 >> link/ether 00:4f:6a:06:57:90 brd ff:ff:ff:ff:ff:ff >> 76: wlan0-1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 >> link/ether 00:00:fa:22:7c:00 brd ff:ff:ff:ff:ff:ff >> >> If I start hostapd on both interfaces now the one on wlan0-1 >> will not work correctly (hw won't ack frames). >> >> Also I think it's possible to change active flag on a monitor >> while it's down (check in net/mac80211/cfg.c:75 only applies >> to interfaces that are up): > > I think we should "just" move ieee80211_verify_mac() into do_open(). > Semantically anyway, I'm clearly handwaving a bit. But I would argue > that you can set any MAC address that you like, as long as you don't > bring the interface up, hence the verification really shouldn't be done > when you assign the address but when you bring it up. I've considered this initially. Two reasons that made me think the current approach is cleaner are: - it's nice when user gets the error during the action that puts system in inconsistent state not some time later. I personally hate to get vague EBUSY and have to figure out what's wrong. - suppose there are two interfaces, both down with incompatible addresses. User adds third ifc, what address should we assign to it? Besides who would care what address does passive monitor have? ;) > Consider also this. Say you have this scenario: > > address mask: 00:00:00:00:00:03 > wlan0: 02:00:00:00:00:00 > wlan1: 02:00:00:00:00:01 > > Now you want to change to > wlan0: 03:00:00:00:00:00 > wlan1: 03:00:00:00:00:01 > > It seems that right now you can't do this at all, which also seems > wrong. Right but I believe user would understand what is the problem here and just remove and recreate one of the interfaces. They have to be down to change MAC addr anyway. Obviously this change is no matter for a big discussion. I already feel like stealing your time a bit, because only rt2x00 cares about this stuff anyway (I think). So please let me know if my reasoning convinces you and if not I will be happy to rewrite this the way you suggest. -- kuba -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
