Search Linux Wireless

[PATCH] wil6210: Fix AP/PCP start flow

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Kirshenbaum Erez <erezk@xxxxxxxxxxxx>
---
 drivers/net/wireless/ath/wil6210/main.c | 35 ---------------------------------
 1 file changed, 35 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index c97b864..271ee22 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -286,41 +286,31 @@ static int __wil_up(struct wil6210_priv *wil)
 {
 	struct net_device *ndev = wil_to_ndev(wil);
 	struct wireless_dev *wdev = wil->wdev;
-	struct ieee80211_channel *channel = wdev->preset_chandef.chan;
 	int rc;
-	int bi;
-	u16 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
 
 	rc = wil_reset(wil);
 	if (rc)
 		return rc;
 
-	/* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */
-	wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC);
 	switch (wdev->iftype) {
 	case NL80211_IFTYPE_STATION:
 		wil_dbg_misc(wil, "type: STATION\n");
-		bi = 0;
 		ndev->type = ARPHRD_ETHER;
 		break;
 	case NL80211_IFTYPE_AP:
 		wil_dbg_misc(wil, "type: AP\n");
-		bi = 100;
 		ndev->type = ARPHRD_ETHER;
 		break;
 	case NL80211_IFTYPE_P2P_CLIENT:
 		wil_dbg_misc(wil, "type: P2P_CLIENT\n");
-		bi = 0;
 		ndev->type = ARPHRD_ETHER;
 		break;
 	case NL80211_IFTYPE_P2P_GO:
 		wil_dbg_misc(wil, "type: P2P_GO\n");
-		bi = 100;
 		ndev->type = ARPHRD_ETHER;
 		break;
 	case NL80211_IFTYPE_MONITOR:
 		wil_dbg_misc(wil, "type: Monitor\n");
-		bi = 0;
 		ndev->type = ARPHRD_IEEE80211_RADIOTAP;
 		/* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */
 		break;
@@ -328,34 +318,9 @@ static int __wil_up(struct wil6210_priv *wil)
 		return -EOPNOTSUPP;
 	}
 
-	/* Apply profile in the following order: */
-	/* SSID and channel for the AP */
-	switch (wdev->iftype) {
-	case NL80211_IFTYPE_AP:
-	case NL80211_IFTYPE_P2P_GO:
-		if (wdev->ssid_len == 0) {
-			wil_err(wil, "SSID not set\n");
-			return -EINVAL;
-		}
-		rc = wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
-		if (rc)
-			return rc;
-		break;
-	default:
-		break;
-	}
-
 	/* MAC address - pre-requisite for other commands */
 	wmi_set_mac_address(wil, ndev->dev_addr);
 
-	/* Set up beaconing if required. */
-	if (bi > 0) {
-		rc = wmi_pcp_start(wil, bi, wmi_nettype,
-				   (channel ? channel->hw_value : 0));
-		if (rc)
-			return rc;
-	}
-
 	/* Rx VRING. After MAC and beacon */
 	wil_rx_init(wil);
 
-- 
1.7.11.7

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux