From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
The commit "ath9k_hw: improve ANI processing and rx desensitizing parameters"
changed the OFDM weak signal detection logic to disable it
for AP mode, which is not allowed. Fix this and enable it always
for AP mode.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ani.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index e91725b..3ec4c53 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -177,10 +177,15 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel,
BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_HIGH)
weak_sig = true;
- if (aniState->ofdmWeakSigDetect != weak_sig)
- ath9k_hw_ani_control(ah,
- ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
- entry_ofdm->ofdm_weak_signal_on);
+ /*
+ * OFDM Weak signal detection is always enabled for AP mode.
+ */
+ if (ah->opmode != NL80211_IFTYPE_AP &&
+ aniState->ofdmWeakSigDetect != weak_sig) {
+ ath9k_hw_ani_control(ah,
+ ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+ entry_ofdm->ofdm_weak_signal_on);
+ }
if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
--
1.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
