My previous patch just moved the file, but it also needed to be renamed
to conform to proper conventions.
Signed-off-by: Solomon Peachy <pizza@xxxxxxxxxxxx>
---
drivers/net/wireless/cw1200/cw1200_sdio.c | 2 +-
drivers/net/wireless/cw1200/cw1200_spi.c | 2 +-
include/linux/platform_data/cw1200_platform.h | 81 ---------------------------
include/linux/platform_data/net-cw1200.h | 81 +++++++++++++++++++++++++++
4 files changed, 83 insertions(+), 83 deletions(-)
delete mode 100644 include/linux/platform_data/cw1200_platform.h
create mode 100644 include/linux/platform_data/net-cw1200.h
diff --git a/drivers/net/wireless/cw1200/cw1200_sdio.c b/drivers/net/wireless/cw1200/cw1200_sdio.c
index 913a3eb..808257e 100644
--- a/drivers/net/wireless/cw1200/cw1200_sdio.c
+++ b/drivers/net/wireless/cw1200/cw1200_sdio.c
@@ -21,7 +21,7 @@
#include "cw1200.h"
#include "hwbus.h"
-#include <linux/platform_data/cw1200_platform.h>
+#include <linux/platform_data/net-cw1200.h>
#include "hwio.h"
MODULE_AUTHOR("Dmitry Tarnyagin <dmitry.tarnyagin@xxxxxxxxxxx>");
diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c
index 5eacf9e..61406e7 100644
--- a/drivers/net/wireless/cw1200/cw1200_spi.c
+++ b/drivers/net/wireless/cw1200/cw1200_spi.c
@@ -26,7 +26,7 @@
#include "cw1200.h"
#include "hwbus.h"
-#include <linux/platform_data/cw1200_platform.h>
+#include <linux/platform_data/net-cw1200.h>
#include "hwio.h"
MODULE_AUTHOR("Solomon Peachy <speachy@xxxxxxxxxx>");
diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h
deleted file mode 100644
index c6fbc3c..0000000
--- a/include/linux/platform_data/cw1200_platform.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Dmitry Tarnyagin <dmitry.tarnyagin@xxxxxxxxxxxxxx>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef CW1200_PLAT_H_INCLUDED
-#define CW1200_PLAT_H_INCLUDED
-
-struct cw1200_platform_data_spi {
- u8 spi_bits_per_word; /* REQUIRED */
- u16 ref_clk; /* REQUIRED (in KHz) */
-
- /* All others are optional */
- bool have_5ghz;
- int reset; /* GPIO to RSTn signal (0 disables) */
- int powerup; /* GPIO to POWERUP signal (0 disables) */
- int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata,
- bool enable); /* Control 3v3 / 1v8 supply */
- int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata,
- bool enable); /* Control CLK32K */
- const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
- const char *sdd_file; /* if NULL, will use default for detected hw type */
-};
-
-struct cw1200_platform_data_sdio {
- u16 ref_clk; /* REQUIRED (in KHz) */
-
- /* All others are optional */
- bool have_5ghz;
- bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */
- int reset; /* GPIO to RSTn signal (0 disables) */
- int powerup; /* GPIO to POWERUP signal (0 disables) */
- int irq; /* IRQ line or 0 to use SDIO IRQ */
- int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata,
- bool enable); /* Control 3v3 / 1v8 supply */
- int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata,
- bool enable); /* Control CLK32K */
- const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
- const char *sdd_file; /* if NULL, will use default for detected hw type */
-};
-
-
-/* An example of SPI support in your board setup file:
-
- static struct cw1200_platform_data_spi cw1200_platform_data = {
- .ref_clk = 38400,
- .spi_bits_per_word = 16,
- .reset = GPIO_RF_RESET,
- .powerup = GPIO_RF_POWERUP,
- .macaddr = wifi_mac_addr,
- .sdd_file = "sdd_sagrad_1091_1098.bin",
- };
- static struct spi_board_info myboard_spi_devices[] __initdata = {
- {
- .modalias = "cw1200_wlan_spi",
- .max_speed_hz = 52000000,
- .bus_num = 0,
- .irq = WIFI_IRQ,
- .platform_data = &cw1200_platform_data,
- .chip_select = 0,
- },
- };
-
- */
-
-/* An example of SDIO support in your board setup file:
-
- static struct cw1200_platform_data_sdio my_cw1200_platform_data = {
- .ref_clk = 38400,
- .have_5ghz = false,
- .sdd_file = "sdd_myplatform.bin",
- };
- cw1200_sdio_set_platform_data(&my_cw1200_platform_data);
-
- */
-
-void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata);
-
-#endif /* CW1200_PLAT_H_INCLUDED */
diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h
new file mode 100644
index 0000000..c6fbc3c
--- /dev/null
+++ b/include/linux/platform_data/net-cw1200.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@xxxxxxxxxxxxxx>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CW1200_PLAT_H_INCLUDED
+#define CW1200_PLAT_H_INCLUDED
+
+struct cw1200_platform_data_spi {
+ u8 spi_bits_per_word; /* REQUIRED */
+ u16 ref_clk; /* REQUIRED (in KHz) */
+
+ /* All others are optional */
+ bool have_5ghz;
+ int reset; /* GPIO to RSTn signal (0 disables) */
+ int powerup; /* GPIO to POWERUP signal (0 disables) */
+ int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata,
+ bool enable); /* Control 3v3 / 1v8 supply */
+ int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata,
+ bool enable); /* Control CLK32K */
+ const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
+ const char *sdd_file; /* if NULL, will use default for detected hw type */
+};
+
+struct cw1200_platform_data_sdio {
+ u16 ref_clk; /* REQUIRED (in KHz) */
+
+ /* All others are optional */
+ bool have_5ghz;
+ bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */
+ int reset; /* GPIO to RSTn signal (0 disables) */
+ int powerup; /* GPIO to POWERUP signal (0 disables) */
+ int irq; /* IRQ line or 0 to use SDIO IRQ */
+ int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata,
+ bool enable); /* Control 3v3 / 1v8 supply */
+ int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata,
+ bool enable); /* Control CLK32K */
+ const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
+ const char *sdd_file; /* if NULL, will use default for detected hw type */
+};
+
+
+/* An example of SPI support in your board setup file:
+
+ static struct cw1200_platform_data_spi cw1200_platform_data = {
+ .ref_clk = 38400,
+ .spi_bits_per_word = 16,
+ .reset = GPIO_RF_RESET,
+ .powerup = GPIO_RF_POWERUP,
+ .macaddr = wifi_mac_addr,
+ .sdd_file = "sdd_sagrad_1091_1098.bin",
+ };
+ static struct spi_board_info myboard_spi_devices[] __initdata = {
+ {
+ .modalias = "cw1200_wlan_spi",
+ .max_speed_hz = 52000000,
+ .bus_num = 0,
+ .irq = WIFI_IRQ,
+ .platform_data = &cw1200_platform_data,
+ .chip_select = 0,
+ },
+ };
+
+ */
+
+/* An example of SDIO support in your board setup file:
+
+ static struct cw1200_platform_data_sdio my_cw1200_platform_data = {
+ .ref_clk = 38400,
+ .have_5ghz = false,
+ .sdd_file = "sdd_myplatform.bin",
+ };
+ cw1200_sdio_set_platform_data(&my_cw1200_platform_data);
+
+ */
+
+void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata);
+
+#endif /* CW1200_PLAT_H_INCLUDED */
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
