From: Hante Meuleman <meuleman@xxxxxxxxxxxx>
Multi channel support was disabled. This patch will enable it and
configure the P2P GO on the correct frequency when multi channel
is used.
Reviewed-by: Arend Van Spriel <arend@xxxxxxxxxxxx>
Signed-off-by: Hante Meuleman <meuleman@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
.../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 26 +++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 656ce87..6a87178 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -3672,10 +3672,28 @@ brcmf_config_ap_mgmt_ie(struct brcmf_cfg80211_vif *vif,
}
static s32
+brcmf_cfg80211_set_channel(struct brcmf_cfg80211_info *cfg,
+ struct brcmf_if *ifp,
+ struct ieee80211_channel *channel)
+{
+ u16 chanspec;
+ s32 err;
+
+ brcmf_dbg(TRACE, "band=%d, center_freq=%d\n", channel->band,
+ channel->center_freq);
+
+ chanspec = channel_to_chanspec(&cfg->d11inf, channel);
+ err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
+
+ return err;
+}
+
+static s32
brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev,
struct cfg80211_ap_settings *settings)
{
s32 ie_offset;
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_tlv *ssid_ie;
struct brcmf_ssid_le ssid_le;
@@ -3746,6 +3764,12 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev,
brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon);
+ err = brcmf_cfg80211_set_channel(cfg, ifp, settings->chandef.chan);
+ if (err < 0) {
+ brcmf_err("Set Channel failed, %d\n", err);
+ goto exit;
+ }
+
if (settings->beacon_interval) {
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD,
settings->beacon_interval);
@@ -4184,7 +4208,7 @@ static const struct ieee80211_iface_limit brcmf_iface_limits[] = {
static const struct ieee80211_iface_combination brcmf_iface_combos[] = {
{
.max_interfaces = BRCMF_IFACE_MAX_CNT,
- .num_different_channels = 1, /* no multi-channel for now */
+ .num_different_channels = 2,
.n_limits = ARRAY_SIZE(brcmf_iface_limits),
.limits = brcmf_iface_limits
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
