From: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
User can add one coalesce rule at a time using 'iw coalesce add'
command. The settings can be cleared using 'iw coalesce disable'
command. 'iw coalesce show' displays current configuration.
Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
Signed-off-by: Bing Zhao <bzhao@xxxxxxxxxxx>
---
Makefile | 2 +-
coalesce.c | 233 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
info.c | 14 ++++
3 files changed, 248 insertions(+), 1 deletion(-)
create mode 100644 coalesce.c
diff --git a/Makefile b/Makefile
index c485b5e..f042e30 100644
--- a/Makefile
+++ b/Makefile
@@ -16,7 +16,7 @@ OBJS = iw.o genl.o event.o info.o phy.o \
interface.o ibss.o station.o survey.o util.o \
mesh.o mpath.o scan.o reg.o version.o \
reason.o status.o connect.o link.o offch.o ps.o cqm.o \
- bitrate.o wowlan.o roc.o p2p.o
+ bitrate.o wowlan.o coalesce.o roc.o p2p.o
OBJS += sections.o
OBJS-$(HWSIM) += hwsim.o
diff --git a/coalesce.c b/coalesce.c
new file mode 100644
index 0000000..d5ab900
--- /dev/null
+++ b/coalesce.c
@@ -0,0 +1,233 @@
+#include <net/if.h>
+#include <errno.h>
+#include <string.h>
+#include <stdio.h>
+
+#include <netlink/genl/genl.h>
+#include <netlink/genl/family.h>
+#include <netlink/genl/ctrl.h>
+#include <netlink/msg.h>
+#include <netlink/attr.h>
+
+#include <arpa/inet.h>
+
+#include "nl80211.h"
+#include "iw.h"
+
+SECTION(coalesce);
+
+static int handle_coalesce_add(struct nl80211_state *state, struct nl_cb *cb,
+ struct nl_msg *msg, int argc, char **argv,
+ enum id_input id)
+{
+ struct nlattr *coalesce, *pattern;
+ struct nl_msg *patterns = NULL;
+ enum {
+ PS_REG,
+ PS_PAT,
+ } parse_state = PS_REG;
+ int err = -ENOBUFS;
+ unsigned char *pat, *mask;
+ size_t patlen;
+ int patnum = 0, pkt_offset;
+ char *eptr, *value1, *value2, *sptr = NULL, *end;
+ unsigned int condition;
+
+ coalesce = nla_nest_start(msg, NL80211_ATTR_COALESCE_RULE);
+ if (!coalesce)
+ return -ENOBUFS;
+
+ NLA_PUT_U32(msg, NL80211_ATTR_COALESCE_RULE_DELAY,
+ strtoul(argv[0], &end, 10));
+ if (*end != '\0')
+ return 1;
+
+ argv++;
+ argc--;
+
+ condition = strtoul(argv[0], &end, 10);
+
+ if (condition != 1 && condition != 0)
+ return 1;
+
+ if (*end)
+ return 1;
+
+ NLA_PUT_U8(msg, NL80211_ATTR_COALESCE_RULE_CONDITION, condition);
+
+ argv++;
+ argc--;
+
+ while (argc) {
+ switch (parse_state) {
+ case PS_REG:
+ if (strcmp(argv[0], "patterns") == 0) {
+ parse_state = PS_PAT;
+ patterns = nlmsg_alloc();
+ if (!patterns) {
+ err = -ENOMEM;
+ goto nla_put_failure;
+ }
+ } else {
+ err = 1;
+ goto nla_put_failure;
+ }
+ break;
+ case PS_PAT:
+ value1 = strtok_r(argv[0], "+", &sptr);
+ value2 = strtok_r(NULL, "+", &sptr);
+
+ if (!value2) {
+ pkt_offset = 0;
+ value2 = value1;
+ } else {
+ pkt_offset = strtoul(value1, &eptr, 10);
+ if (eptr != value1 + strlen(value1)) {
+ err = 1;
+ goto nla_put_failure;
+ }
+ }
+
+ if (parse_hex_mask(value2, &pat, &patlen, &mask)) {
+ err = 1;
+ goto nla_put_failure;
+ }
+
+ pattern = nla_nest_start(patterns, ++patnum);
+ NLA_PUT(patterns, NL80211_PKTPAT_MASK,
+ DIV_ROUND_UP(patlen, 8), mask);
+ NLA_PUT(patterns, NL80211_PKTPAT_PATTERN, patlen, pat);
+ NLA_PUT_U32(patterns, NL80211_PKTPAT_OFFSET,
+ pkt_offset);
+ nla_nest_end(patterns, pattern);
+ free(mask);
+ free(pat);
+ break;
+ }
+ argv++;
+ argc--;
+ }
+
+ if (patterns)
+ nla_put_nested(msg, NL80211_ATTR_COALESCE_RULE_PKT_PATTERN,
+ patterns);
+
+ nla_nest_end(msg, coalesce);
+ err = 0;
+ nla_put_failure:
+ nlmsg_free(patterns);
+ return err;
+}
+COMMAND(coalesce, add, "<delay> <0|1> patterns [offset1+]<pattern1> ...]",
+ NL80211_CMD_SET_COALESCE, 0, CIB_PHY, handle_coalesce_add,
+ "Add coalesce rule.\n"
+ "Maximum coalescing delay in msec.\n"
+ "Condition is 0/1 i.e. 'not match'/'match' the patterns\n"
+ "Each pattern is given as a bytestring with '-' in places where any byte\n"
+ "may be present, e.g. 00:11:22:-:44 will match 00:11:22:33:44 and\n"
+ "00:11:22:33:ff:44 etc.\n"
+ "Offset and pattern should be separated by '+', e.g. 18+43:34:00:12 will match "
+ "'43:34:00:12' after 18 bytes of offset in Rx packet.\n\n");
+
+
+static int
+handle_coalesce_disable(struct nl80211_state *state, struct nl_cb *cb,
+ struct nl_msg *msg, int argc, char **argv,
+ enum id_input id)
+{
+ /* just a set w/o coalesce attribute */
+ return 0;
+}
+COMMAND(coalesce, disable, "", NL80211_CMD_SET_COALESCE, 0, CIB_PHY,
+ handle_coalesce_disable, "Disable coalesce.");
+
+static int print_coalesce_handler(struct nl_msg *msg, void *arg)
+{
+ struct nlattr *attrs[NL80211_ATTR_MAX + 1];
+ struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg));
+ struct nlattr *pattern, *rule;
+ int rem_pattern, rem_rule;
+ bool condition;
+ int delay;
+
+ nla_parse(attrs, NL80211_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
+ genlmsg_attrlen(gnlh, 0), NULL);
+
+ if (!attrs[NL80211_ATTR_COALESCE_RULE]) {
+ printf("Coalesce is disabled.\n");
+ return NL_SKIP;
+ }
+
+ printf("Coalesce is enabled:\n");
+
+ nla_for_each_nested(rule, attrs[NL80211_ATTR_COALESCE_RULE], rem_rule) {
+ struct nlattr *ruleattr[NUM_NL80211_ATTR_COALESCE_RULE];
+
+ nla_parse(ruleattr, NL80211_ATTR_COALESCE_RULE_MAX,
+ nla_data(rule), nla_len(rule), NULL);
+
+ delay = nla_get_u32(ruleattr[NL80211_ATTR_COALESCE_RULE_DELAY]);
+ condition =
+ nla_get_u8(ruleattr[NL80211_ATTR_COALESCE_RULE_CONDITION]);
+
+ printf("Rule - max coalescing delay: %dmsec condition:", delay);
+ if (condition)
+ printf("match\n");
+ else
+ printf("not match\n");
+
+ if (ruleattr[NL80211_ATTR_COALESCE_RULE_PKT_PATTERN]) {
+ nla_for_each_nested(pattern,
+ ruleattr[NL80211_ATTR_COALESCE_RULE_PKT_PATTERN],
+ rem_pattern) {
+ struct nlattr *patattr[NUM_NL80211_PKTPAT];
+ int i, patlen, masklen, pkt_offset;
+ uint8_t *mask, *pat;
+
+ nla_parse(patattr, MAX_NL80211_PKTPAT,
+ nla_data(pattern), nla_len(pattern),
+ NULL);
+ if (!patattr[NL80211_PKTPAT_MASK] ||
+ !patattr[NL80211_PKTPAT_PATTERN] ||
+ !patattr[NL80211_PKTPAT_OFFSET]) {
+ printf(" * (invalid pattern specification)\n");
+ continue;
+ }
+ masklen = nla_len(patattr[NL80211_PKTPAT_MASK]);
+ patlen = nla_len(patattr[NL80211_PKTPAT_PATTERN]);
+ pkt_offset = nla_get_u32(patattr[NL80211_PKTPAT_OFFSET]);
+ if (DIV_ROUND_UP(patlen, 8) != masklen) {
+ printf(" * (invalid pattern specification)\n");
+ continue;
+ }
+ printf(" * packet offset: %d", pkt_offset);
+ printf(" pattern: ");
+ pat = nla_data(patattr[NL80211_PKTPAT_PATTERN]);
+ mask = nla_data(patattr[NL80211_PKTPAT_MASK]);
+ for (i = 0; i < patlen; i++) {
+ if (mask[i / 8] & (1 << (i % 8)))
+ printf("%.2x", pat[i]);
+ else
+ printf("--");
+ if (i != patlen - 1)
+ printf(":");
+ }
+ printf("\n");
+ }
+ }
+ }
+
+ return NL_SKIP;
+}
+
+static int handle_coalesce_show(struct nl80211_state *state, struct nl_cb *cb,
+ struct nl_msg *msg, int argc, char **argv,
+ enum id_input id)
+{
+ nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM,
+ print_coalesce_handler, NULL);
+
+ return 0;
+}
+COMMAND(coalesce, show, "", NL80211_CMD_GET_COALESCE, 0, CIB_PHY, handle_coalesce_show,
+ "Show coalesce status.");
diff --git a/info.c b/info.c
index d893ffc..849da67 100644
--- a/info.c
+++ b/info.c
@@ -528,6 +528,20 @@ broken_combination:
printf("\tDevice supports AP scan.\n");
}
+ if (tb_msg[NL80211_ATTR_COALESCE_RULE]) {
+ struct nl80211_coalesce_rule_support *rule;
+ struct nl80211_pattern_support *pat;
+
+ printf("\tCoalesce support:\n");
+ rule = nla_data(tb_msg[NL80211_ATTR_COALESCE_RULE]);
+ pat = &rule->pat;
+ printf("\t\t * Maximum %u coalesce rules supported\n"
+ "\t\t * Each rule contains upto %u patterns of %u-%u bytes,\n"
+ "\t\t maximum packet offset %u bytes\n",
+ rule->max_rules, pat->max_patterns, pat->min_pattern_len,
+ pat->max_pattern_len, pat->max_pkt_offset);
+ }
+
return NL_SKIP;
}
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
