This is a collection of minor fixes:
* don't allow HT IEs in IBSS for 5/10 MHz
* don't allow HT IEs in Mesh for 5/10 MHz
* consider 5 and 10 MHz channels when downgrading
* don't try HT rates for 5 and 10 MHz channels when selecting rates
Signed-off-by: Simon Wunderlich <siwu@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@xxxxxxxxxxxxxxxxxxx>
---
net/mac80211/ibss.c | 2 ++
net/mac80211/mesh.c | 4 +++-
net/mac80211/mesh_plink.c | 8 +++++++-
net/mac80211/mlme.c | 12 ++++++++++++
net/mac80211/rate.c | 8 +++++++-
5 files changed, 31 insertions(+), 3 deletions(-)
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 170f9a7..4e1fb81 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -176,6 +176,8 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
/* add HT capability and information IEs */
if (chandef.width != NL80211_CHAN_WIDTH_20_NOHT &&
+ chandef.width != NL80211_CHAN_WIDTH_5 &&
+ chandef.width != NL80211_CHAN_WIDTH_10 &&
sband->ht_cap.ht_supported) {
pos = ieee80211_ie_build_ht_cap(pos, &sband->ht_cap,
sband->ht_cap.cap);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 6952760..5227b73 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -417,7 +417,9 @@ int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
sband = local->hw.wiphy->bands[band];
if (!sband->ht_cap.ht_supported ||
- sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
+ sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
+ sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
+ sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
return 0;
if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap))
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 09bebed..02c05fa 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -154,8 +154,14 @@ static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata)
u16 ht_opmode;
bool non_ht_sta = false, ht20_sta = false;
- if (sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
+ switch (sdata->vif.bss_conf.chandef.width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
return 0;
+ default:
+ break;
+ }
rcu_read_lock();
list_for_each_entry_rcu(sta, &local->sta_list, list) {
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 29620bf..0eaee23 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -224,6 +224,12 @@ static u32 chandef_downgrade(struct cfg80211_chan_def *c)
c->width = NL80211_CHAN_WIDTH_20_NOHT;
ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
break;
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
+ WARN_ON_ONCE(1);
+ /* keep c->width */
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ break;
}
WARN_ON_ONCE(!cfg80211_chandef_valid(c));
@@ -3809,6 +3815,12 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
*/
ret = ieee80211_vif_use_channel(sdata, &chandef,
IEEE80211_CHANCTX_SHARED);
+
+ /* don't downgrade for 5 and 10 MHz channels, though. */
+ if (chandef.width == NL80211_CHAN_WIDTH_5 ||
+ chandef.width == NL80211_CHAN_WIDTH_10)
+ return ret;
+
while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
ifmgd->flags |= chandef_downgrade(&chandef);
ret = ieee80211_vif_use_channel(sdata, &chandef,
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 8b95819..118e47b 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -397,8 +397,14 @@ static void rate_idx_match_mask(struct ieee80211_tx_rate *rate,
return;
/* if HT BSS, and we handle a data frame, also try HT rates */
- if (chan_width == NL80211_CHAN_WIDTH_20_NOHT)
+ switch (chan_width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
return;
+ default:
+ break;
+ }
alt_rate.idx = 0;
/* keep protection flags */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
