I use this WNIC in a s3c6410 devboard called OK6410 made by forlinx(http://www.forlinx.net/Other/6.htm) The kernel is 3.0.1, the driver in the kernel source can't work. So I tried compat-wireless-3.3-2-n and compat-wireless-3.5.4-1. 3.3-2 is eaier to get -101 error when I load the modules, in this time I have to replug WNIC card. When networking is connected, I can't ping ar6003 in the other place, if ar6003 didn't send any data recently.Once ar6003 stoped sending, I can't send to ar6003 after a very little while. But if I send large data like video both of them still stop working after a while, 3.3-2(about 5 minutes) seems to work more longer than 3.5.4-1(about 1 mintue). But both ip link and iw wlan0 link show my link is up. I have to ifdown and ifup to use wireless again. kvalo said it cause by irq problem.But when I compiled compat-wireless with debug, I only have files in /sys/kernel/debug/ieee80211/ phy0/ , but there is ath6kl directory there. I have enabled all debug_mask, but I don't get any irq infomation frome dmesg. Could you tell me the correct way enable debug in compiling and load module? P.S how to install compat-wireless? I can't use INSTALL_MOD_PATH, I have to copy these directory and use find tool to remove .c .h .o files. Here is output of /proc/interrupts in ok6410 CPU0 16: 3 s3c-uart s3c6400-uart 18: 240 s3c-uart s3c6400-uart 20: 2 s3c-uart 22: 48 s3c-uart 35: 0 VIC s3c-fimc0 36: 0 VIC s3c-fimc1 40: 0 VIC s3c-g3d 41: 0 VIC s3c-pp 42: 0 VIC s3c-rotator 43: 0 VIC s3c-g2d 44: 0 VIC TV_ENCODER 45: 0 VIC TV_SCALER 47: 0 VIC s3c-jpeg 48: 4735 VIC s3c-mfc 54: 0 VIC s3c-keypad 58: 0 VIC s3c2410-wdt 62: 460074 VIC s3c-lcd 68: 26 VIC AC97 73: 0 VIC DMA 74: 0 VIC DMA 79: 177847 VIC ohci_hcd:usb1 82: 123 VIC s3c2440-i2c.0 88: 46540 VIC mmc0 94: 0 VIC s3c_updown 95: 0 VIC adc, s3c_action 100: 727214 s3c-timer S3C2410 Timer Tick 101: 0 s3c-eint BUTTON1 102: 0 s3c-eint BUTTON2 103: 0 s3c-eint BUTTON3 104: 0 s3c-eint BUTTON4 105: 0 s3c-eint BUTTON5 106: 0 s3c-eint BUTTON6 108: 59168 s3c-eint eth0 Err: 0 ----- ayaka -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
