From: Amitkumar Karwar <akarwar@xxxxxxxxxxx> They are not used in the code. Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx> Signed-off-by: Bing Zhao <bzhao@xxxxxxxxxxx> --- drivers/net/wireless/mwifiex/sdio.h | 51 ------------------------------------- 1 file changed, 51 deletions(-) diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h index e4016d2..339608b 100644 --- a/drivers/net/wireless/mwifiex/sdio.h +++ b/drivers/net/wireless/mwifiex/sdio.h @@ -66,14 +66,8 @@ /* Host Control Registers : Configuration */ #define CONFIGURATION_REG 0x00 -/* Host Control Registers : Host without Command 53 finish host*/ -#define HOST_TO_CARD_EVENT (0x1U << 3) -/* Host Control Registers : Host without Command 53 finish host */ -#define HOST_WO_CMD53_FINISH_HOST (0x1U << 2) /* Host Control Registers : Host power up */ #define HOST_POWER_UP (0x1U << 1) -/* Host Control Registers : Host power down */ -#define HOST_POWER_DOWN (0x1U << 0) /* Host Control Registers : Host interrupt mask */ #define HOST_INT_MASK_REG 0x02 @@ -93,60 +87,15 @@ /* Host Control Registers : Host interrupt RSR */ #define HOST_INT_RSR_REG 0x01 -/* Host Control Registers : Upload host interrupt RSR */ -#define UP_LD_HOST_INT_RSR (0x1U) /* Host Control Registers : Host interrupt status */ #define HOST_INT_STATUS_REG 0x28 -/* Host Control Registers : Upload CRC error */ -#define UP_LD_CRC_ERR (0x1U << 2) -/* Host Control Registers : Upload restart */ -#define UP_LD_RESTART (0x1U << 1) -/* Host Control Registers : Download restart */ -#define DN_LD_RESTART (0x1U << 0) /* Card Control Registers : Card I/O ready */ #define CARD_IO_READY (0x1U << 3) -/* Card Control Registers : CIS card ready */ -#define CIS_CARD_RDY (0x1U << 2) -/* Card Control Registers : Upload card ready */ -#define UP_LD_CARD_RDY (0x1U << 1) /* Card Control Registers : Download card ready */ #define DN_LD_CARD_RDY (0x1U << 0) -/* Card Control Registers : Host interrupt mask register */ -#define HOST_INTERRUPT_MASK_REG 0x34 -/* Card Control Registers : Host power interrupt mask */ -#define HOST_POWER_INT_MASK (0x1U << 3) -/* Card Control Registers : Abort card interrupt mask */ -#define ABORT_CARD_INT_MASK (0x1U << 2) -/* Card Control Registers : Upload card interrupt mask */ -#define UP_LD_CARD_INT_MASK (0x1U << 1) -/* Card Control Registers : Download card interrupt mask */ -#define DN_LD_CARD_INT_MASK (0x1U << 0) - -/* Card Control Registers : Card interrupt status register */ -#define CARD_INTERRUPT_STATUS_REG 0x38 -/* Card Control Registers : Power up interrupt */ -#define POWER_UP_INT (0x1U << 4) -/* Card Control Registers : Power down interrupt */ -#define POWER_DOWN_INT (0x1U << 3) - -/* Card Control Registers : Card interrupt RSR register */ -#define CARD_INTERRUPT_RSR_REG 0x3c -/* Card Control Registers : Power up RSR */ -#define POWER_UP_RSR (0x1U << 4) -/* Card Control Registers : Power down RSR */ -#define POWER_DOWN_RSR (0x1U << 3) - -/* Host F1 card ready */ -#define HOST_F1_CARD_RDY 0x0020 - -/* Rx length register */ -#define CARD_RX_LEN_REG 0x62 -/* Rx unit register */ -#define CARD_RX_UNIT_REG 0x63 - /* Max retry number of CMD53 write */ #define MAX_WRITE_IOMEM_RETRY 2 -- 1.8.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
