From: Simon Wunderlich <siwu@xxxxxxxxxxxxxxxxxx>
Add defines for 5 and 10 MHz channel width and fix channel
handling functions accordingly.
Also check for and report the WIPHY_FLAG_SUPPORTS_5_10_MHZ
capability.
Signed-off-by: Simon Wunderlich <siwu@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@xxxxxxxxxxxxxxxxxxx>
---
include/net/cfg80211.h | 2 ++
include/uapi/linux/nl80211.h | 4 ++++
net/wireless/chan.c | 29 +++++++++++++++++++++++++++++
net/wireless/nl80211.c | 21 +++++++++++++++++----
4 files changed, 52 insertions(+), 4 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 26e9113..2aeecfa 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2321,6 +2321,7 @@ struct cfg80211_ops {
* responds to probe-requests in hardware.
* @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX.
* @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call.
+ * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels.
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -2344,6 +2345,7 @@ enum wiphy_flags {
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19),
WIPHY_FLAG_OFFCHAN_TX = BIT(20),
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21),
+ WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22),
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index b484307..ed4f106 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2738,6 +2738,8 @@ enum nl80211_channel_type {
* and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
* @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
* attribute must be provided as well
+ * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
*/
enum nl80211_chan_width {
NL80211_CHAN_WIDTH_20_NOHT,
@@ -2746,6 +2748,8 @@ enum nl80211_chan_width {
NL80211_CHAN_WIDTH_80,
NL80211_CHAN_WIDTH_80P80,
NL80211_CHAN_WIDTH_160,
+ NL80211_CHAN_WIDTH_5,
+ NL80211_CHAN_WIDTH_10,
};
/**
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index fd556ac..4052815 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -54,6 +54,8 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
control_freq = chandef->chan->center_freq;
switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
case NL80211_CHAN_WIDTH_20:
case NL80211_CHAN_WIDTH_20_NOHT:
if (chandef->center_freq1 != control_freq)
@@ -152,6 +154,12 @@ static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c)
int width;
switch (c->width) {
+ case NL80211_CHAN_WIDTH_5:
+ width = 5;
+ break;
+ case NL80211_CHAN_WIDTH_10:
+ width = 10;
+ break;
case NL80211_CHAN_WIDTH_20:
case NL80211_CHAN_WIDTH_20_NOHT:
width = 20;
@@ -194,6 +202,16 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1,
if (c1->width == c2->width)
return NULL;
+ /*
+ * can't be compatible if one of them are 5 or 10 MHz,
+ * but they have not the same width.
+ */
+ if (c1->width == NL80211_CHAN_WIDTH_5 ||
+ c1->width == NL80211_CHAN_WIDTH_10 ||
+ c2->width == NL80211_CHAN_WIDTH_5 ||
+ c2->width == NL80211_CHAN_WIDTH_10)
+ return NULL;
+
if (c1->width == NL80211_CHAN_WIDTH_20_NOHT ||
c1->width == NL80211_CHAN_WIDTH_20)
return c2;
@@ -349,6 +367,12 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
control_freq = chandef->chan->center_freq;
switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_5:
+ width = 5;
+ break;
+ case NL80211_CHAN_WIDTH_10:
+ width = 10;
+ break;
case NL80211_CHAN_WIDTH_20:
if (!ht_cap->ht_supported)
return false;
@@ -405,6 +429,11 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
if (width > 20)
prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
+ /* 5 and 10 MHz are only defined for the OFDM PHY */
+ if (width < 20)
+ prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
+
+
if (!cfg80211_secondary_chans_ok(wiphy, chandef->center_freq1,
width, prohibited_flags))
return false;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 9cdcd9e..f67d825 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1228,6 +1228,9 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *dev,
if ((dev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP) &&
nla_put_flag(msg, NL80211_ATTR_TDLS_EXTERNAL_SETUP))
goto nla_put_failure;
+ if ((dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_5_10_MHZ) &&
+ nla_put_flag(msg, WIPHY_FLAG_SUPPORTS_5_10_MHZ))
+ goto nla_put_failure;
(*split_start)++;
if (split)
@@ -1771,6 +1774,11 @@ static int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
IEEE80211_CHAN_DISABLED))
return -EINVAL;
+ if ((chandef->width == NL80211_CHAN_WIDTH_5 ||
+ chandef->width == NL80211_CHAN_WIDTH_10) &&
+ !(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_5_10_MHZ))
+ return -EINVAL;
+
return 0;
}
@@ -6326,11 +6334,16 @@ static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
if (!cfg80211_reg_can_beacon(&rdev->wiphy, &ibss.chandef))
return -EINVAL;
- if (ibss.chandef.width > NL80211_CHAN_WIDTH_40)
- return -EINVAL;
- if (ibss.chandef.width != NL80211_CHAN_WIDTH_20_NOHT &&
- !(rdev->wiphy.features & NL80211_FEATURE_HT_IBSS))
+ switch (ibss.chandef.width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ break;
+ case NL80211_CHAN_WIDTH_20:
+ case NL80211_CHAN_WIDTH_40:
+ if (rdev->wiphy.features & NL80211_FEATURE_HT_IBSS)
+ break;
+ default:
return -EINVAL;
+ }
ibss.channel_fixed = !!info->attrs[NL80211_ATTR_FREQ_FIXED];
ibss.privacy = !!info->attrs[NL80211_ATTR_PRIVACY];
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
