current firmware will enable STBC_TX, only if other peer support it.
This patch provide ht_peer_caps to firmware.
FW versions 1.3, 1.4 should be able to work with it.
Tested on ar7010+ar9280 and ar7010+ar9287.
Signed-off-by: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/htc.h | 2 ++
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 3 +++
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 4 ++++
3 files changed, 9 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index d3b099d..db4a793 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -142,6 +142,8 @@ struct ath9k_htc_target_aggr {
#define WLAN_RC_40_FLAG 0x02
#define WLAN_RC_SGI_FLAG 0x04
#define WLAN_RC_HT_FLAG 0x08
+#define WLAN_RC_TX_STBC_FLAG 0x20 /* TX STBC */
+#define WLAN_RC_RX_STBC_FLAG 0xC0 /* RX STBC ,2 bits */
struct ath9k_htc_rateset {
u8 rs_nrates;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index a47f5e0..c79c5ac 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -517,6 +517,9 @@ static void setup_ht_cap(struct ath9k_htc_priv *priv,
ath_dbg(common, CONFIG, "TX streams %d, RX streams: %d\n",
tx_streams, rx_streams);
+ if (tx_streams >= 2)
+ ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
+
if (tx_streams != rx_streams) {
ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
ht_info->mcs.tx_params |= ((tx_streams - 1) <<
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 0743a47..af08b4a 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -623,6 +623,10 @@ static void ath9k_htc_setup_rate(struct ath9k_htc_priv *priv,
trate->rates.ht_rates.rs_nrates = j;
caps = WLAN_RC_HT_FLAG;
+ if (sta->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)
+ caps |= WLAN_RC_RX_STBC_FLAG;
+ if (sta->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)
+ caps |= WLAN_RC_TX_STBC_FLAG;
if (sta->ht_cap.mcs.rx_mask[1])
caps |= WLAN_RC_DS_FLAG;
if ((sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
