On 04/24/2013 12:27 PM, Michael Stahn wrote:
okay now it gets a little awkward: un/reloading the driver seems to
fix the authentication-problem (ip gets assigned), but no ping
succeeds..
http://bpaste.net/show/93913/
2013/4/24 Michael Stahn <michael.stahn.42@xxxxxxxxx>:
I'm using a i686 Architecture on AMD E2-1800 APU with Radeon(tm) HD
Graphics AuthenticAMD GNU/Linux with linux 3.7.10. CONFIG_USB_DEBUG
was allready set. I've used an USB 3.0 port previously and now
rechecked everything with a USB2.0 port. The result is nearly the
same: first connection succeeds (ping response), doing a manual
reconnect to the AP leads to the same error. I've done several
ifconfig down/ups at the end with no change.
dmesg gives: http://bpaste.net/show/93912/
To be able to work on the error messages from ehci-hcd, it is likely that we
will need all the messages associated with the initialization of the hub. That
is the reason that I asked that you post the entire dmesg output, starting at
time 0.
What encryption are you using?
Larry
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html