I try to setup 2 mesh node on the same wireless card. I am using the ath9k driver from Compat 2013-02-22 (openwrt package). The command line sequence is Create mesh node 1 iw phy0 interface add wlan0 type mp iw wlan0 set channel 44 HT20 ifconfig wlan0 up iw wlan0 mesh join test Create mesh node 2 iw phy0 interface add wlan1 type mp iw wlan1 set channel 44 HT20 ifconfig wlan1 hw ether 00:09:90:aa:11:22 up iw wlan1 mesh join test2 With wireshark and air pcap adapter, I cannot see the beacon for the second mesh node. If I execute each mesh node separately, it works correctly (I see the beacon on wireshark) Is it possible to execute 2 mesh node on one ath9k wireless card? Cedric Voncken -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
