From: "Alex A. Mihaylov" <minimumlaw@xxxxxxxxxx>
Some cards on Ralink RT30xx chipset not have correctly TX_MIXER_GAIN
value in them EEPROM/EFUSE. In this case, we must use default value,
but always used EEPROM/EFUSE value. As result we have tranmitt power
range from -10dBm to +6dBm instead 0dBm to +16dBm.
Correctly value in EEPROM/EFUSE is one or more for RT3070 and two or
more for other RT30xx chips.
Tested on Canyon CNP-WF518N1 usb Wi-Fi dongle and Jorjin WN8020 usb
embedded Wi-Fi module.
Signed-off-by: Alex A. Mihaylov <minimumlaw@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
drivers/net/wireless/rt2x00/rt2800lib.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index a658b4b..92849e5 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4436,6 +4436,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
if (!rt2x00_rt(rt2x00dev, RT5390) &&
!rt2x00_rt(rt2x00dev, RT5392)) {
+ u8 min_gain = rt2x00_rt(rt2x00dev, RT3070) ? 1 : 2;
+
rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0);
if (rt2x00_rt(rt2x00dev, RT3070) ||
@@ -4446,8 +4448,10 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
&rt2x00dev->cap_flags))
rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
}
- rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN,
- drv_data->txmixer_gain_24g);
+ if (drv_data->txmixer_gain_24g >= min_gain) {
+ rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN,
+ drv_data->txmixer_gain_24g);
+ }
rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
}
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
