Don't use create_proc_read_entry() as that is deprecated, but rather use
proc_create_data() and seq_file instead. Whilst we're at it, reduce the
number of show functions where we can share them.
Note: proc_get_stats_ap() should probably use seq_file iteration rather than
list_for_each_entry().
Further note: There appears to be a lot of locking missing in this file to
defend against concurrent access by the driver doing normal operations.
Notably, ieee->network_list traversal and RWCAM/RCAMO command/response access.
Further, do any of the registers read have side effects upon reading?
Signed-off-by: David Howells <dhowells@xxxxxxxxxx>
cc: Jerry Chuang <jerry-chuang@xxxxxxxxxxx>
cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
cc: linux-wireless@xxxxxxxxxxxxxxx
cc: devel@xxxxxxxxxxxxxxxxxxxx
---
drivers/staging/rtl8192u/r8192U_core.c | 215 ++++++++++++++------------------
1 file changed, 92 insertions(+), 123 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index f7de2f6..0bec385 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -71,6 +71,8 @@ double __extendsfdf2(float a) {return a;}
//#include "r8192xU_phyreg.h"
#include <linux/usb.h>
#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
// FIXME: check if 2.6.7 is ok
#ifdef CONFIG_RTL8192_PM
@@ -472,103 +474,73 @@ void watch_dog_timer_callback(unsigned long data);
static struct proc_dir_entry *rtl8192_proc;
-static int proc_get_stats_ap(char *page, char **start, off_t offset, int count,
- int *eof, void *data)
+static int proc_get_stats_ap(struct seq_file *m, void *v)
{
- struct net_device *dev = data;
+ struct net_device *dev = m->private;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
struct ieee80211_device *ieee = priv->ieee80211;
struct ieee80211_network *target;
- int len = 0;
-
list_for_each_entry(target, &ieee->network_list, list) {
-
- len += snprintf(page + len, count - len, "%s ", target->ssid);
-
+ const char *wpa = "non_WPA";
if (target->wpa_ie_len > 0 || target->rsn_ie_len > 0)
- len += snprintf(page + len, count - len, "WPA\n");
- else
- len += snprintf(page + len, count - len, "non_WPA\n");
+ wpa = "WPA";
+
+ seq_printf(m, "%s %s\n", target->ssid, wpa);
}
- *eof = 1;
- return len;
+ return 0;
}
-static int proc_get_registers(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
+static int proc_get_registers(struct seq_file *m, void *v)
{
- struct net_device *dev = data;
-// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- int len = 0;
- int i,n;
+ struct net_device *dev = m->private;
+ int i,n, max = 0xff;
- int max=0xff;
-
- /* This dump the current register page */
- len += snprintf(page + len, count - len,
- "\n####################page 0##################\n ");
+ seq_puts(m, "\n####################page 0##################\n ");
for (n=0;n<=max;) {
//printk( "\nD: %2x> ", n);
- len += snprintf(page + len, count - len,
- "\nD: %2x > ",n);
+ seq_printf(m, "\nD: %2x > ",n);
for (i=0;i<16 && n<=max;i++,n++)
- len += snprintf(page + len, count - len,
- "%2x ",read_nic_byte(dev,0x000|n));
+ seq_printf(m, "%2x ",read_nic_byte(dev,0x000|n));
// printk("%2x ",read_nic_byte(dev,n));
}
- len += snprintf(page + len, count - len,
- "\n####################page 1##################\n ");
+
+ seq_puts(m, "\n####################page 1##################\n ");
for (n=0;n<=max;) {
//printk( "\nD: %2x> ", n);
- len += snprintf(page + len, count - len,
- "\nD: %2x > ",n);
+ seq_printf(m, "\nD: %2x > ",n);
for (i=0;i<16 && n<=max;i++,n++)
- len += snprintf(page + len, count - len,
- "%2x ",read_nic_byte(dev,0x100|n));
+ seq_printf(m, "%2x ",read_nic_byte(dev,0x100|n));
// printk("%2x ",read_nic_byte(dev,n));
}
- len += snprintf(page + len, count - len,
- "\n####################page 3##################\n ");
+
+ seq_puts(m, "\n####################page 3##################\n ");
for (n=0;n<=max;) {
//printk( "\nD: %2x> ", n);
- len += snprintf(page + len, count - len,
- "\nD: %2x > ",n);
+ seq_printf(m, "\nD: %2x > ",n);
for(i=0;i<16 && n<=max;i++,n++)
- len += snprintf(page + len, count - len,
- "%2x ",read_nic_byte(dev,0x300|n));
+ seq_printf(m, "%2x ",read_nic_byte(dev,0x300|n));
// printk("%2x ",read_nic_byte(dev,n));
}
- len += snprintf(page + len, count - len,"\n");
- *eof = 1;
- return len;
+ seq_putc(m, '\n');
+ return 0;
}
-
-
-
-
-static int proc_get_stats_tx(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
+static int proc_get_stats_tx(struct seq_file *m, void *v)
{
- struct net_device *dev = data;
+ struct net_device *dev = m->private;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- int len = 0;
-
- len += snprintf(page + len, count - len,
+ seq_printf(m,
"TX VI priority ok int: %lu\n"
"TX VI priority error int: %lu\n"
"TX VO priority ok int: %lu\n"
@@ -629,22 +601,15 @@ static int proc_get_stats_tx(char *page, char **start,
// priv->stats.txbeaconerr
);
- *eof = 1;
- return len;
+ return 0;
}
-
-
-static int proc_get_stats_rx(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
+static int proc_get_stats_rx(struct seq_file *m, void *v)
{
- struct net_device *dev = data;
+ struct net_device *dev = m->private;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- int len = 0;
-
- len += snprintf(page + len, count - len,
+ seq_printf(m,
"RX packets: %lu\n"
"RX urb status error: %lu\n"
"RX invalid urb error: %lu\n",
@@ -652,9 +617,9 @@ static int proc_get_stats_rx(char *page, char **start,
priv->stats.rxstaterr,
priv->stats.rxurberr);
- *eof = 1;
- return len;
+ return 0;
}
+
void rtl8192_proc_module_init(void)
{
RT_TRACE(COMP_INIT, "Initializing proc filesystem");
@@ -667,74 +632,78 @@ void rtl8192_proc_module_remove(void)
remove_proc_entry(RTL819xU_MODULE_NAME, init_net.proc_net);
}
-
-void rtl8192_proc_remove_one(struct net_device *dev)
+/*
+ * seq_file wrappers for procfile show routines.
+ */
+static int rtl8192_proc_open(struct inode *inode, struct file *file)
{
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
+ struct proc_dir_entry *e = PDE(inode);
+ struct net_device *dev = e->parent->data;
+ int (*show)(struct seq_file *, void *) = e->data;
- if (priv->dir_dev) {
- // remove_proc_entry("stats-hw", priv->dir_dev);
- remove_proc_entry("stats-tx", priv->dir_dev);
- remove_proc_entry("stats-rx", priv->dir_dev);
- // remove_proc_entry("stats-ieee", priv->dir_dev);
- remove_proc_entry("stats-ap", priv->dir_dev);
- remove_proc_entry("registers", priv->dir_dev);
- // remove_proc_entry("cck-registers",priv->dir_dev);
- // remove_proc_entry("ofdm-registers",priv->dir_dev);
- //remove_proc_entry(dev->name, rtl8192_proc);
- remove_proc_entry("wlan0", rtl8192_proc);
- priv->dir_dev = NULL;
- }
+ return single_open(file, show, dev);
}
+static const struct file_operations rtl8192_proc_fops = {
+ .open = rtl8192_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+/*
+ * Table of proc files we need to create.
+ */
+struct rtl8192_proc_file {
+ char name[12];
+ int (*show)(struct seq_file *, void *);
+};
+
+static const struct rtl8192_proc_file rtl8192_proc_files[] = {
+ { "stats-rx", &proc_get_stats_rx },
+ { "stats-tx", &proc_get_stats_tx },
+ { "stats-ap", &proc_get_stats_ap },
+ { "registers", &proc_get_registers },
+ { "" }
+};
void rtl8192_proc_init_one(struct net_device *dev)
{
- struct proc_dir_entry *e;
+ const struct rtl8192_proc_file *f;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- priv->dir_dev = proc_mkdir(dev->name, rtl8192_proc);
- if (!priv->dir_dev) {
- RT_TRACE(COMP_ERR, "Unable to initialize /proc/net/rtl8192/%s\n",
- dev->name);
- return;
- }
- e = create_proc_read_entry("stats-rx", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_stats_rx, dev);
-
- if (!e) {
- RT_TRACE(COMP_ERR,"Unable to initialize "
- "/proc/net/rtl8192/%s/stats-rx\n",
- dev->name);
- }
-
- e = create_proc_read_entry("stats-tx", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_stats_tx, dev);
-
- if (!e) {
- RT_TRACE(COMP_ERR, "Unable to initialize "
- "/proc/net/rtl8192/%s/stats-tx\n",
- dev->name);
+ if (rtl8192_proc) {
+ priv->dir_dev = proc_mkdir(dev->name, rtl8192_proc);
+ if (!priv->dir_dev) {
+ RT_TRACE(COMP_ERR, "Unable to initialize /proc/net/rtl8192/%s\n",
+ dev->name);
+ return;
+ }
+ priv->dir_dev->data = dev;
+
+ for (f = rtl8192_proc_files; f->name[0]; f++) {
+ if (!proc_create_data(f->name, S_IFREG | S_IRUGO,
+ priv->dir_dev,
+ rtl8192_proc_fops, f->show)) {
+ RT_TRACE(COMP_ERR, "Unable to initialize "
+ "/proc/net/rtl8192/%s/%s\n",
+ dev->name, f->name);
+ return;
+ }
+ }
}
+}
- e = create_proc_read_entry("stats-ap", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_stats_ap, dev);
-
- if (!e) {
- RT_TRACE(COMP_ERR, "Unable to initialize "
- "/proc/net/rtl8192/%s/stats-ap\n",
- dev->name);
- }
+void rtl8192_proc_remove_one(struct net_device *dev)
+{
+ struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- e = create_proc_read_entry("registers", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_registers, dev);
- if (!e) {
- RT_TRACE(COMP_ERR, "Unable to initialize "
- "/proc/net/rtl8192/%s/registers\n",
- dev->name);
+ if (priv->dir_dev) {
+ remove_proc_subtree(dev->name, rtl8192_proc);
+ priv->dir_dev = NULL;
}
}
+
/****************************************************************************
-----------------------------MISC STUFF-------------------------
*****************************************************************************/
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
