From: Piotr Haber <phaber@xxxxxxxxxxxx> Set device in a manner that SDIO I/O card reset will lead to WLAN backplane and PMU state reset. Reviewed-by: Hante Meuleman <meuleman@xxxxxxxxxxxx> Reviewed-by: Arend van Spriel <arend@xxxxxxxxxxxx> Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx> Reviewed-by: Franky (Zhenhui) Lin <frankyl@xxxxxxxxxxxx> Signed-off-by: Piotr Haber <phaber@xxxxxxxxxxxx> Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx> --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 38 ++++++++++++++++---- .../net/wireless/brcm80211/brcmfmac/sdio_host.h | 2 ++ include/linux/bcma/bcma_driver_chipcommon.h | 3 ++ 3 files changed, 36 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index d24eb66..c06bb08 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -3635,7 +3635,6 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) int err = 0; int reg_addr; u32 reg_val; - u8 idx; bus->alp_only = true; @@ -3686,12 +3685,37 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) goto fail; } - /* Set core control so an SDIO reset does a backplane reset */ - idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); - reg_addr = bus->ci->c_inf[idx].base + - offsetof(struct sdpcmd_regs, corecontrol); - reg_val = brcmf_sdio_regrl(bus->sdiodev, reg_addr, NULL); - brcmf_sdio_regwl(bus->sdiodev, reg_addr, reg_val | CC_BPRESEN, NULL); + /* Set card control so an SDIO card reset does a WLAN backplane reset */ + reg_val = brcmf_sdio_regrb(bus->sdiodev, + SDIO_CCCR_BRCM_CARDCTRL, &err); + if (err) + goto fail; + + reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET; + + brcmf_sdio_regwb(bus->sdiodev, + SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); + if (err) + goto fail; + + /* set PMUControl so a backplane reset does PMU state reload */ + reg_addr = CORE_CC_REG(bus->ci->c_inf[0].base, + pmucontrol); + reg_val = brcmf_sdio_regrl(bus->sdiodev, + reg_addr, + &err); + if (err) + goto fail; + + reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT); + + brcmf_sdio_regwl(bus->sdiodev, + reg_addr, + reg_val, + &err); + if (err) + goto fail; + sdio_release_host(bus->sdiodev->func[1]); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h index b9b397b..28ed3cc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h @@ -52,6 +52,8 @@ #define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT 0x02 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT 0x04 #define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC 0x08 +#define SDIO_CCCR_BRCM_CARDCTRL 0xf1 +#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET 0x02 #define SDIO_CCCR_BRCM_SEPINT 0xf2 #define SDIO_SEPINT_MASK 0x01 diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 453fcc9..b8b09ea 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -316,6 +316,9 @@ #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 +#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ +#define BCMA_CC_PMU_CTL_RES_SHIFT 13 +#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
