An allyesconfig build of rtl8188ee yields the following duplicate entry points:
drivers/net/wireless/rtlwifi/rtl8188ee/built-in.o: In function `.rtl92c_phy_ap_calibrate':
(.text+0x21d14): multiple definition of `.rtl92c_phy_ap_calibrate'
drivers/net/wireless/rtlwifi/rtl8192c/built-in.o:(.text+0xb1e8): first defined here
drivers/net/wireless/rtlwifi/rtl8188ee/built-in.o: In function `rtl_hal_pwrseqcmdparsing':
(.opd+0xed0): multiple definition of `rtl_hal_pwrseqcmdparsing'
One of the routines is not used and can be deleted, the other is renamed.
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Reported-by: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
@@ -2001,16 +2001,6 @@ void rtl88e_phy_lc_calibrate(struct ieee
rtlphy->lck_inprogress = false;
}
-void rtl92c_phy_ap_calibrate(struct ieee80211_hw *hw, char delta)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_phy *rtlphy = &(rtlpriv->phy);
-
- if (rtlphy->apk_done)
- return;
- return;
-}
-
void rtl88e_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain)
{
rfpath_switch(hw, bmain, false);
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
@@ -225,7 +225,6 @@ extern void rtl88e_phy_set_bw_mode(struc
extern void rtl88e_phy_sw_chnl_callback(struct ieee80211_hw *hw);
extern u8 rtl88e_phy_sw_chnl(struct ieee80211_hw *hw);
extern void rtl88e_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
-void rtl92c_phy_ap_calibrate(struct ieee80211_hw *hw, char delta);
void rtl88e_phy_lc_calibrate(struct ieee80211_hw *hw);
void rtl88e_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
bool rtl88e_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -814,11 +814,11 @@ static bool _rtl88ee_init_mac(struct iee
rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00);
/* HW Power on sequence */
- if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
- PWR_INTF_PCI_MSK,
- Rtl8188E_NIC_ENABLE_FLOW)) {
+ if (!rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
+ PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
+ Rtl8188E_NIC_ENABLE_FLOW)) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
- "init MAC Fail as rtl_hal_pwrseqcmdparsing\n");
+ "init MAC Fail as rtl88_hal_pwrseqcmdparsing\n");
return false;
}
@@ -1344,8 +1344,9 @@ static void _rtl88ee_poweroff_adapter(st
}
rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG+1, 0xFF);
- rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
- PWR_INTF_PCI_MSK, Rtl8188E_NIC_LPS_ENTER_FLOW);
+ rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+ PWR_INTF_PCI_MSK,
+ Rtl8188E_NIC_LPS_ENTER_FLOW);
rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00);
@@ -1359,8 +1360,8 @@ static void _rtl88ee_poweroff_adapter(st
u1b_tmp = rtl_read_byte(rtlpriv, REG_32K_CTRL);
rtl_write_byte(rtlpriv, REG_32K_CTRL, (u1b_tmp & (~BIT(0))));
- rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
- PWR_INTF_PCI_MSK, Rtl8188E_NIC_DISABLE_FLOW);
+ rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+ PWR_INTF_PCI_MSK, Rtl8188E_NIC_DISABLE_FLOW);
u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL+1);
rtl_write_byte(rtlpriv, REG_RSV_CTRL+1, (u1b_tmp & (~BIT(3))));
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c
@@ -39,9 +39,9 @@
* 2011.07.07, added by Roger.
*/
-bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
- u8 fab_version, u8 interface_type,
- struct wlan_pwr_cfg pwrcfgcmd[])
+bool rtl88_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
+ u8 fab_version, u8 interface_type,
+ struct wlan_pwr_cfg pwrcfgcmd[])
{
struct wlan_pwr_cfg cmd = {0};
bool polling_bit = false;
@@ -54,7 +54,7 @@ bool rtl_hal_pwrseqcmdparsing(struct rtl
do {
cmd = pwrcfgcmd[ary_idx];
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): offset(%#x), cut_msk(%#x), fab_msk(%#x),"
+ "rtl88_hal_pwrseqcmdparsing(): offset(%#x), cut_msk(%#x), fab_msk(%#x),"
"interface_msk(%#x), base(%#x), cmd(%#x), msk(%#x), val(%#x)\n",
GET_PWR_CFG_OFFSET(cmd),
GET_PWR_CFG_CUT_MASK(cmd),
@@ -71,11 +71,11 @@ bool rtl_hal_pwrseqcmdparsing(struct rtl
switch (GET_PWR_CFG_CMD(cmd)) {
case PWR_CMD_READ:
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_READ\n");
+ "rtl88_hal_pwrseqcmdparsing(): PWR_CMD_READ\n");
break;
case PWR_CMD_WRITE: {
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_WRITE\n");
+ "rtl88_hal_pwrseqcmdparsing(): PWR_CMD_WRITE\n");
offset = GET_PWR_CFG_OFFSET(cmd);
/*Read the val from system register*/
@@ -90,7 +90,7 @@ bool rtl_hal_pwrseqcmdparsing(struct rtl
break;
case PWR_CMD_POLLING:
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_POLLING\n");
+ "rtl88_hal_pwrseqcmdparsing(): PWR_CMD_POLLING\n");
polling_bit = false;
offset = GET_PWR_CFG_OFFSET(cmd);
@@ -115,7 +115,7 @@ bool rtl_hal_pwrseqcmdparsing(struct rtl
break;
case PWR_CMD_DELAY:
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_DELAY\n");
+ "rtl88_hal_pwrseqcmdparsing(): PWR_CMD_DELAY\n");
if (GET_PWR_CFG_VALUE(cmd) == PWRSEQ_DELAY_US)
udelay(GET_PWR_CFG_OFFSET(cmd));
else
@@ -123,12 +123,12 @@ bool rtl_hal_pwrseqcmdparsing(struct rtl
break;
case PWR_CMD_END:
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_END\n");
+ "rtl88_hal_pwrseqcmdparsing(): PWR_CMD_END\n");
return true;
break;
default:
RT_ASSERT(false,
- "rtl_hal_pwrseqcmdparsing(): Unknown CMD!!\n");
+ "rtl88_hal_pwrseqcmdparsing(): Unknown CMD!!\n");
break;
}
}
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h
@@ -90,8 +90,8 @@ struct wlan_pwr_cfg {
#define GET_PWR_CFG_MASK(__PWR) (__PWR.msk)
#define GET_PWR_CFG_VALUE(__PWR) (__PWR.value)
-bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
- u8 fab_version, u8 interface_type,
- struct wlan_pwr_cfg pwrcfgcmd[]);
+bool rtl88_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
+ u8 fab_version, u8 interface_type,
+ struct wlan_pwr_cfg pwrcfgcmd[]);
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
