Search Linux Wireless

RE: Firmware problems with Lesswire Wibear 11n module using mwifiex

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Martin,

> [ 2210.066680] mwifiex_sdio mmc1:0001:1: WLAN FW is active
> [ 2220.083880] mwifiex_sdio mmc1:0001:1: mwifiex_cmd_timeout_func:
> Timeout cmd id (1584563353.27844) = 0xa9, act = 0x0
> 
> This shows that there is no reply to the first command sent in
> mwifiex_sta_init_cmd()

There is a possibility that the firmware has responded to this command but the SDIO interrupt gets stuck somewhere.

Are you able to hook up an oscilloscope to check whether SDIO DAT1 pin stays low or not?

Thanks,
Bing

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux